Reynolds, D., Popplestone, A., Gwynne, P. and Reynolds, D. (2005) High Performance, Water-Based Drilling Fluid Helps Achieve Early Oil with Lower Capital Expenditure. SPE 96798.

has been cited by the following article:

• TITLE: Synthesis and Performance Evaluation of Anti Temperature and Salt Resistant Polymer Filtrate Reducer

  AUTHORS: Zhu Zhu, Huaiyuan Long, Dichen Tan, Song Wang, Zuwen Wang, Shunyuan Zhang, Yu Deng

  KEYWORDS: Polymer, Filtrate Reducer, Rheological Characteristic, Monomer, Synthesis, Drilling Fluid

  JOURNAL NAME: Open Journal of Yangtze Oil and Gas, Vol.4 No.4, October 10, 2019

  ABSTRACT: In the experiment, the filtrate loss of synthetic fluid loss control fluid was recorded in room temperature and high temperature in the composite brine base and sodium chloride brine base slurry, and compared with the filtrate loss before base polymer addition. In this way, the effect of filtration loss and salt resistance and temperature resistance of synthetic polymers were evaluated. The influence of the synthesized polymer on the rheological properties of the composite brine was also evaluated by determining the viscosity of the drilling fluid added to the base slurry and polymer. In the end, the structure of the synthetic polymers was characterized through the infrared spectrum, which initially analyzed through the mechanism of its function in reducing the filter loss. Finally, the products produced according to the recipe are given to the site and added to the two wells to record the drilling fluid performance data.