Winkler, D.A., Breedon, M., White, P., Hughes, A.E., Sapper, E.D. and Cole, I. (2016) Using High Throughput Experimental Data and in Silicon Models to Discover Alternatives to Toxic Chromate Corrosion Inhibitors. Corrosion Science, 106, 229-235.
https://doi.org/10.1016/j.corsci.2016.02.008

has been cited by the following article:

• TITLE: Development of an In-Situ Composite Doped Coating for Corrosion Protection and Mechanical Properties Enhancements in Process Engineering

  AUTHORS: Oluwasegun T. Joshua, Ojo S. I. Fayomi, Enejoh T. Omeje

  KEYWORDS: Coating, Mild Steel, Corrosion, Hardness

  JOURNAL NAME: Journal of Minerals and Materials Characterization and Engineering, Vol.7 No.4, July 22, 2019

  ABSTRACT: Process engineering has been seen as one of the vital tools for improving surface coating phenomena for advance application. In an attempt to improve the mechanical, physical and chemical performance of the steel structure for ex-tended application, Zn-CeO2/ZnCeO2-Al2SiO5 thin film composite was fabri-cated on mild steel using direct electrolytic route. Process variation of Al2SiO5 particulate ranges from 5 to 15 g per litre. The embedded coating was charac-terized using Scanning electron microscope (SEM). The chemical effect of the developed alloy was characterized through linear potentiodynamic polarization experiment and the performances of samples were examined in simulated 3.5% sodium chloride. The microhardness verification study proves that there is sig-nificant improvement in hardness trend. The tribological assessment indicated that there is less plastic deformation as a result of the counter body. In all, Zn-CeO2/Zn-CeO2-Al2SiO5 exhibits good stability, with agglomeration and great built up of crystal at the interface.