D. Ahn, J.-S. Kim, C.-S. Kim, J. Qian, and T. Itoh, “A Design of the Low-Pass Filter Using the Novel Microstrip Defected Ground Structure,” IEEE Transactions on Microwave Theory and Techniques, Vol.49, No.1, 2001, pp. 86-91. doi:10.1109/22.899965

has been cited by the following article:

• TITLE: Compact Metamaterial Microstrip Low-Pass Filter

  AUTHORS: Sudhakar Sahu, Rabindra Kishore Mishra, Dipak Ranjan Poddar

  KEYWORDS: Hex-Omega Structure, Microstrip Low-Pass Filter, Metamaterial, Sharp Cut-Off

  JOURNAL NAME: Journal of Electromagnetic Analysis and Applications, Vol.3 No.10, October 24, 2011

  ABSTRACT: Complimentary hexagonal-omega structures are used to design compact, low insertion loss (IL), low pass filter with sharp cut-off. It has been designed for improvement of roll-off performance based on both μ and ε negative property of the complimentary hex-omega structure while maintaining the filter pass-band performance. By properly designing and loading the hexagonal-omega structure in the ground of microstrip line not only improve the roll-off of the low pass filter, but also reduced the filter size. The simulated results indicate that the proposed filter achieves a flat pass band with no ripples as well as selectivity of 19.68 dB/GHz, corresponding to 5-unit cells hex-omega structures. This significantly exceeds the 5.6 dB/GHz selectivity of the conventional low pass filter design, due to sub-lambda dimensions of the hex-omega structure. A prototype filter implementing area is: 0.712λg x 0.263λg, λg being the guided wavelength at 3-dB cut-off frequency (fc). The proposed filter has a size smaller by 36.2%.