A. Wulamu, M. Goetting and D, Zeckzer, “Approximation of NURBS Curves and Surfaces Using Adaptive Equidistant Parameteriza-tions,” Tsinghua Science & Technology, Vol. 10, No. 3, 2005, pp. 316-322. doi:10.1016/S1007-0214(05)70075-4

has been cited by the following article:

• TITLE: Reverse Engineering Closely-Spaced Free-Form Shapes for a Fabric-Over-Body Model

  AUTHORS: Daniel Chen, Anish Ravindran, Pradeep Vishwabrahmanasaraf

  KEYWORDS: Reverse Engineering, Point Cloud Data, Mesh Generation, Delaunay Meshing, Quality Checks

  JOURNAL NAME: Engineering, Vol.3 No.10, October 21, 2011

  ABSTRACT: This paper presents a case study of reverse engineering closely-spaced free-form shapes. The raw point cloud data captured from a body scanner was processed to filter most noise and redundancy. They were used to generate meshes through triangulation of points. Upon removal of inconsistencies resulted from residual noise, the clean-up meshes were then used to reconstruct the free-form surfaces that represented a fabric layer and a human body surface. The solid produced between these two surfaces is the fabric-over-body model. It helped generate a FEA (finite-element analysis) mesh with quality checks, such as distortion and stretch, were performed for all the meshed tetrahedral elements. The purpose is to prepare a FEA-ready model for future CFD (computational fluid dynamics) analysis.