Schmidt, H. and Hattel, J. (2005) A Local Model for the Thermomechanical Conditions in Friction Stir Welding. Modelling and Simulation in Materials Science and Engineering, 13, 77-93.
https://doi.org/10.1088/0965-0393/13/1/006

has been cited by the following article:

• TITLE: Effect of Cooling Conditions on Mechanical and Microstructural Behaviours of Friction Stir Processed AZ31B Mg Alloy

  AUTHORS: Sankar Ramaiyan, Rathinasuriyan Chandran, Senthil Kumar Velukkudi Santhanam

  KEYWORDS: Friction Stir Processing, AZ31B Magnesium Alloy, Cryogenic Coolant, Liquid Nitrogen and Mechanical Properties, Axial Force, Submerged Friction Stir Processing

  JOURNAL NAME: Modern Mechanical Engineering, Vol.7 No.4, November 28, 2017

  ABSTRACT: Friction stir processing (FSP) is an important microstructural alteration process used recently in the engineering field. Grains alteration and hence the mechanical properties of the possessed zone are controlled by the temperature, heating and cooling rate. In this work, AZ31B magnesium samples were friction stir processed in three different cooling conditions like air, water and cryogenic (liquid nitrogen) cooling. 1000 rpm and 60 mm/min were kept constant as tool rotation speed and traverse speed respectively in all the three mediums. The consequence of these conditions on thermal fields, axial force, resulting grain structure and mechanical propertieswasstudied. It is found that the cryogenic treated friction stir processed samples exhibit fine grain structures and hence offer better mechanical properties than the air and water cooled processed samples.