Oko, A., Swerin, A., Brandner, B.D., Bugner, D., Cook, W. and Claesson, P.M. (2014) Aggregation of Inkjet Ink Components by Ca and Mg Ions in Relation to Colorant Pigment Distribution in Paper. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 456, 92-99.
https://doi.org/10.1016/j.colsurfa.2014.05.023

has been cited by the following article:

• TITLE: Examination of Treatment Methods for a PEDOT:PSS Transparent Conductive Film Produced Using an Inkjet Method

  AUTHORS: Atsushi Nitta, Yuki Imamura, Kazuya Kawahara, Kazuhiro Takeda

  KEYWORDS: PEDOT:PSS, Inkjet Printing, Transparent Conductive Film, Flexible Devices

  JOURNAL NAME: Advances in Materials Physics and Chemistry, Vol.7 No.8, July 27, 2017

  ABSTRACT: Flexible devices manufactured using printed electronics have attracted the attention of many researchers. A high-performance transparent conductive film exhibiting high flexibility and elasticity is expected to be developed because of its need for the creation of flexible devices. An indium tin oxide (ITO) thin film, which has generally been used, has weaknesses such as fragility to bending stress and depletion of the resource. This study focused on poly (3, 4-ethy-lenedioxythiophene)/poly (styrenesulfonate) (PEDOT:PSS), a conductive polymer material, and examined improvement in the resistivity and transmittance of the transparent conductive film produced using an inkjet method. The present study improved the electrical and optical characteristics of the thin film by examining the annealing temperature between printing operations and the application method of a polar solvent. As a result, the resistivity and transmittance of a PEDOT:PSS thin film were 1.49 × 10-3 Ω·cm and 89.2%, respectively. This film was obtained by annealing at 90°C for 30 min and applying a polar solvent, using an inkjet printer, between printing operations. The printing was performed three times.