Why Us? >>

  • - Open Access
  • - Peer-reviewed
  • - Rapid publication
  • - Lifetime hosting
  • - Free indexing service
  • - Free promotion service
  • - More citations
  • - Search engine friendly

Free SCIRP Newsletters>>

Add your e-mail address to receive free newsletters from SCIRP.

 

Contact Us >>

WhatsApp  +86 18163351462(WhatsApp)
   
Paper Publishing WeChat
Book Publishing WeChat
(or Email:book@scirp.org)

Article citations

More>>

Metzger, D.E., Fan, C.S. and Haley, S.W. (1984) Effects of Pin Shape and Array Orientation on Heat Transfer and Pressure Loss in Pin Fin Arrays. Journal of Engineering for Gas Turbines and Power, 106, 252–257.
https://doi.org/10.1115/1.3239545

has been cited by the following article:

  • TITLE: Experimental, Mathematical and Finite Element Analysis (FEA) of Temperature Distribution through Rectangular Fin with Circular Perforations

    AUTHORS: Joel Hemanth

    KEYWORDS: Fin, Mathematical, Temperature, FEA and Perforations

    JOURNAL NAME: Modeling and Numerical Simulation of Material Science, Vol.7 No.2, April 28, 2017

    ABSTRACT: Fins are the extended surfaces through which heat transfer takes place to keep the surface cool. Fins of various configurations are presently used ranging from automobile engine cooling to cooling of computer parts. Note that in a fin majority of the heat transfer to atmosphere is by convection and therefore in the present research, and importance is given to variation of temperature along the length of the fin which in turn gives rate of heat transfer. In the present research a solid rectangular aluminum fin and the same rectangular fin with different perforations (2, 4, 8 and 10) were compared analytically, experimentally and its validity through finite element analysis for its temperature distribution along the length. From the present research it is observed that the mathematical and FEA for a solid rectangular fin without perforations are converging within ±1°C and rectangular fin with 10 perforations are converging within ±2°C and hence the validity.