Why Us? >>

  • - Open Access
  • - Peer-reviewed
  • - Rapid publication
  • - Lifetime hosting
  • - Free indexing service
  • - Free promotion service
  • - More citations
  • - Search engine friendly

Free SCIRP Newsletters>>

Add your e-mail address to receive free newsletters from SCIRP.


Contact Us >>

WhatsApp  +86 18163351462(WhatsApp)
Paper Publishing WeChat
Book Publishing WeChat
(or Email:book@scirp.org)

Article citations


Mrzyglód, B., et al. (2015) Effect of Heat Treatment Parameters on the Formation of ADI Microstructure with Additions of Ni, Cu, Mo. Archives of Metallurgy and Materials, 60, 1941-1948.

has been cited by the following article:

  • TITLE: Thermomechanical Testing of GGG 40 Spheroidal Graphite Cast Iron Alloy

    AUTHORS: Marwan Faisal, Eman El-Shenawy, Mohamed A. Taha

    KEYWORDS: Thermo-Mechanical Behavior, Spheroidal Graphite Cast Iron, Gleeble-3500

    JOURNAL NAME: Materials Sciences and Applications, Vol.8 No.3, March 31, 2017

    ABSTRACT: Spheroidal graphite cast iron GGG 40 was thermo-mechanically tested using thermo-mechanical simulator Gleeble-3500. Three deformation steps were successively applied on test-specimen at temperatures namely; 900°C, 850°C and 750°C within the austenitic zone, at the same strain rate of 0.1 s-1. No cracks were observed, up to 50% deformation, after successive deformation steps. Stress-strain relationship obtained is correlated with previous work on SGCI with a different carbon equivalent. It was found that by decreasing the deformation temperature; for the same CE, young’s modulus, yield strength and strain hardening exponent increase. Microstructure of the deformed zone, for a specimen quenched after the final deformation step, reveals fine elongated ferrite and pearlite, as well as elongated graphite. While microstructure of the non-deformed zone subjected to the same treatment, includes coarser ferrite and pearlite with graphite spheres embedded in the matrix.