Mirza, N.M., Rafique, M., Mirza, S.M. and Hyder, M. J. (2005) Simulation of Corrosion Product Activity for Nonlinearly Rising Corrosion on Inner Surfaces of Primary Coolant Pipes of a Typical PWR under Flow Rate Transients. Applied Radiation & Isotopes, 62, 681-692.
https://doi.org/10.1016/j.apradiso.2004.12.005

has been cited by the following article:

• TITLE: Evaluation of Corrosion Product Activity in a Typical PWR with Extended Cycles and Flow Rate Perturbations

  AUTHORS: Rubina Nasir, Sikander M. Mirza, Nasir M. Mirza

  KEYWORDS: PWRs, Corrosion Products, Enriched Boric Acid, Extended Cycles, Flow Rate Perturbations

  JOURNAL NAME: World Journal of Nuclear Science and Technology, Vol.7 No.1, January 3, 2017

  ABSTRACT: Effect of flow rate perturbations has been studied using the modified computer program CPAIR-P for time dependent corrosion rates in Pressurized Water Reactors (PWRs) having extended cycles. In these simulations, a decrease in the corresponding saturation values of corrosion product activity (CPA) is observed for higher pH values. Comparison of CPA’s behavior has been done for constant flow-rate case as well as for transients with elevated 10B levels (~40%) in dissolved boric acid in coolant in two operating cycles. When the flow rate is decreased in the first cycle, the saturation value of CPA attains new higher values. Also, in the second operating cycle, the saturation values are about 12% higher when compared with the values in the first cycle.