Why Us? >>

  • - Open Access
  • - Peer-reviewed
  • - Rapid publication
  • - Lifetime hosting
  • - Free indexing service
  • - Free promotion service
  • - More citations
  • - Search engine friendly

Free SCIRP Newsletters>>

Add your e-mail address to receive free newsletters from SCIRP.


Contact Us >>

WhatsApp  +86 18163351462(WhatsApp)
Paper Publishing WeChat
Book Publishing WeChat
(or Email:book@scirp.org)

Article citations


Matjunin, V.M. (2006) On-Line Diagnostics of Mechanical Properties of Construction Materials. MEI, Moscow, 214.

has been cited by the following article:

  • TITLE: Metal-Ceramic Smart Composite in Ti(C,N)-Ni-Mo-W System

    AUTHORS: Z. Kovziridze, N. Nizharadze, G. Tabatadze, E. Nikoleishvili, M. Mshvildadze

    KEYWORDS: Metal-Ceramic, Composite, Cutting Material, High-Temperature, Heatproof, Micro Hardness

    JOURNAL NAME: Journal of Electronics Cooling and Thermal Control, Vol.6 No.2, June 7, 2016

    ABSTRACT: Goal: Low wolfram-containing cutting composite was obtained by fusion of titanium carbonitride and high melting temperature binding metallic phase. Method: The composite was obtained via compaction and further sintering in vacuum furnace at 1600°C under 10-3 Pa pressure. Phase analysis was performed on X-ray apparatus “DRON-3”; microstructure was determined by electron microscope NANOLAB-7, microhardness by MUCKE-mark microhardness meter; relative resistance of cutters was evaluated at similar modes of cutting according to distances they passed; experiments were carried out on turning lathe. Results: Physical-mechanical characteristics of the obtained composite are: σbend, = 1000 - 1150 MPa, σbend1000°C = 600 MPa, HV = 14 GPa; HV1000°C = 6.5 GPa. High speeds of cutting and high temperatures resistance of cutters made by the obtained composites exceeds 1.5 - 2-folds that of cutters made of the known BK8 and KNT20 hard alloys. Conclusion: Its application is recommended in hot steel treatment by cutting, for removal of the so-called burrs, as well as in steel treatment by cutting during pure and semi-pure operations. It can also be used in jet engines, chemical industry apparatuses, electric-vacuum devices, in industry of responsible details of rockets, nuclear reactors, flying apparatuses.