Why Us? >>

  • - Open Access
  • - Peer-reviewed
  • - Rapid publication
  • - Lifetime hosting
  • - Free indexing service
  • - Free promotion service
  • - More citations
  • - Search engine friendly

Free SCIRP Newsletters>>

Add your e-mail address to receive free newsletters from SCIRP.


Contact Us >>

WhatsApp  +86 18163351462(WhatsApp)
Paper Publishing WeChat
Book Publishing WeChat
(or Email:book@scirp.org)

Article citations


Ke, Y., Qi, G.P., Cay, S.Y. and Bo, B.W. (2010) Mathematical Analysis of Transverse Vibration of Conical Spiral Tube Bundle with External Fluid Flow. Journal of Hydrodynamics, 22, 816-822.

has been cited by the following article:

  • TITLE: Design and Construction of a Spiral Heat Exchanger

    AUTHORS: Jamshid Khorshidi, Salman Heidari

    KEYWORDS: Heat Exchanger, Spiral, Numerical Modelling, Design, Construction

    JOURNAL NAME: Advances in Chemical Engineering and Science, Vol.6 No.2, April 27, 2016

    ABSTRACT: In this article, the performance and applications of a Spiral Plate Heat Exchanger are demonstrated. Also, governing equation of heat transfer phenomena in such heat exchangers is discussed. Regarding the governing equations, a LAB-sized model of this type of heat exchanger was designed and constructed. Galvanized Iron sheets were used as the heat transfer surfaces. Two Galvanized Iron sheets were rolled together around a central core and, as a result, two separated channels were made. Also, a predesign simulation of the heat exchanger was done using the Fluent software to predict the performance of the heat exchanger. First the geometry was made using Gambit software environment then the model was analyzed through Fluent. Because of less fouling, easier cleaning and high heat transfer coefficient, Spiral Heat Exchanger is a good alternative to the other types of heat exchangers, especially when it’s going to handle high fouling flows or highly viscous fluids. Low fouling rate of the heat exchanger, reduces the need of cleaning and therefore the out of service will be decreased. In the constructed heat exchanger, Nusselt number increases as the mass flow rate increases. Average Nusselt number is about 100 that is very good.