Lo, K.H., Kwok, C.T., Cheng, F.T. and Man, H.C. (2003) Corrosion Resistance of Laser-Fabricated Metal-Matrix Composite Layer on Stainless Steel 316L. Journal of Laser Applications, 15, 107-114.
http://dx.doi.org/10.2351/1.1536649

has been cited by the following article:

• TITLE: Corrosion Behaviour of TiC-Reinforced Hadfield Manganese Austenitic Steel Matrix In-Situ Composites

  AUTHORS: Ashok Kumar, Srivastava, Karabi Das

  KEYWORDS: Steel Matrix in Situ Composites, Titanium-Carbide, Corrosion Resistance

  JOURNAL NAME: Open Journal of Metal, Vol.5 No.2, June 30, 2015

  ABSTRACT: The corrosion behaviour of Hadfield manganese austenitic steel matrix composite reinforced with the varying amount of TiC and unreinforced Hadfield manganese austenitic steel matrix alloy has been evaluated in 3.5% NaCl aqueous solution with the pH value of 6 by the potentiodynamic polarization curves and linear polarization resistance measurements at a scan rate of 1 mV/s at room temperature (25°C ± 2°C). The corrosion rate of the composites is higher than that of their unreinforced matrix alloy and it increases with the increasing volume fraction of TiC. The poor corrosion resistance of the composites can be attributed to the galvanic effects between the matrix and reinforcement.