Locke, C.E. and Siman, A. (1980) Electrochemistry of Reinforcing Steel in Salt-Contaminated Concrete. In: Corrosion of Reinforcing Steel in Concrete, STP 713, American Society of Testing and Materials, Philadelphia, 3-26.
http://dx.doi.org/10.1520/STP27465S

has been cited by the following article:

• TITLE: Performance of Galvanized Steel Reinforcement in Concrete in Sea and Dead Sea Water

  AUTHORS: Sami Masadeh

  KEYWORDS: Electrochemical Impedance, Concrete, Galvanized Steel, Dead Sea Water

  JOURNAL NAME: Journal of Materials Science and Chemical Engineering, Vol.3 No.5, May 7, 2015

  ABSTRACT: Steel reinforcements of 8 mm diameter and 24 cm length were cut from steel and after pickling treatment of all specimens. Steel reinforcements then were galvanized by hot dipping method. The measured coating thickness by thickness gage meter of zinc coat was in the range 8 - 11 μm. Bare steel samples were also used for comparison reasons. Each steel bar was inserted in a middle of a plastic tube with 4.5 cm diameter into which concrete was cast. After proper curing, specimens were immersed into 3.5% NaCl and Dead Sea water separately. Electrochemical impedance spectroscopy measurements were performed at different time intervals. Results showed that galvanized steel was corrosion resistant in sea water, and Dead Sea water over the test period.