Nikezic, D. and Yu, K.N. (2006) Computer Program TRACK_TEST for Calculating Parameters and Plotting Profiles for Etch Pits in Nuclear Track Materials. Computer Physics Communications, 174, 160-165.
http://dx.doi.org/10.1016/j.cpc.2005.09.011

has been cited by the following article:

• TITLE: Measure the Bulk Etch Rate Using the Time-Diameter Method

  AUTHORS: Hussein A. Ahmed, Alan S. Said Ahmad, Ari A. Mohammed

  KEYWORDS: Bulk Etch Rate, CR-39, Diameter-Time Measurements, Nuclear Track Detector (NTD)

  JOURNAL NAME: Materials Sciences and Applications, Vol.6 No.4, March 31, 2015

  ABSTRACT: The present work measured the bulk etch rate (VB) of solid state nuclear track detector by taking the diameter time measurement of alpha particle in CR-39 detector. The values of the track diameter have been found by using TRACK-TEST program from Yu et al. function and Brun et al. function with different energies of alpha particles. The results showed that the time-diameter (t-d) method gave good results of the bulk etch rate (VB) and these values were (1.705 and 1.72) μm·hr-1. They showed good agreement with the values measured by using the other methods, and it was a simple method because it required getting diameters of the tracks in the detector with the etching time.