[3] Fultz, B. and Howe, J. (2000) Transmission Electron Microscopy and Diffractometry of Materials. Springer, Berlin, 276-284.

has been cited by the following article:

• TITLE: Phase Identification Using Series of Selected Area Diffraction Patterns and Energy Dispersive Spectrometry within TEM

  AUTHORS: Kun-Lin Lin

  KEYWORDS: Phase Identification, Transmission Electron Microscopy, Selected Area Diffraction Pattern, Energy Dispersive Spectroscopy

  JOURNAL NAME: Microscopy Research, Vol.2 No.4, October 24, 2014

  ABSTRACT: Transmission electron microscopy (TEM) is a very powerful technique for materials characteriza-tion, providing information relating to morphology, composition, and crystal structure. Selected area diffraction patterns (SADPs) are crystallographic data that can be obtained using a TEM in-strument. Conventional identification through SADP/TEM is tricky and tedious, thereby increasing the difficulty of phase identification. To establish a procedure for phase identification of known and unknown phases, in this study we examined two samples: one, a known phase, was Si with alignment; the other, unknown, was the TixOy phase at the 96.4Au-3Ni-0.6Ti interlayer/ yttria-stabilized zirconia (YSZ) interface of a steel/96.4Au-3Ni-0.6Ti interlayer/YSZ joint. The procedures for phase identification of the known and unknown phases are described herein using a series of SADPs and energy dispersive spectrometry within TEM that would be useful for general researchers.