Degirmenci, G. (2005) Investigation of the Effect of Implants Used in Extremity Fractures on Movement Restrictions. Master in Science Thesis, Natural Science Institute of Uludag University, Turkey.

has been cited by the following article:

• TITLE: Numerical Stress Analysis of the Plates Used to Treat the Tibia Bone Fracture

  AUTHORS: M. O. Kaman, N. Celik, S. Karakuzu

  KEYWORDS: Tibia Fracture, Finite Element Model, ANSYS, Biomechanics

  JOURNAL NAME: Journal of Applied Mathematics and Physics, Vol.2 No.6, May 16, 2014

  ABSTRACT: Tibial fractures are one of the most frequent bone fractures caused by accidents or falls because of the tibia’s slender shape. In the tibial fractures close to the joint surface, a plate and screws may be the ideal method of fixation. While using the plate and the screws the estimation of the stress on the plate and screw gains importance before beginning the treatment. In this study, it is aimed to conduct a numerical simulation which uses finite element methodology, to estimate the von Mises stress subjected to the plate and screw which is used in tibia fracture treatment. A titanium plate and 4 screws on it are used for treatment of the fracture. The fracture angle varies as 0°, 15°, 30°, and 45°. The compressive force affected on the plate is estimated to be 750 N. Moreover, the bone is simulated 3D, by using commercial software, ANSYS Structural.