J. Jezek, J. W. Dilleen, B. G. D. Haggett, A. G. Fogg and B. J. Birch, “Hexacyanoferrate(III) as a Mediator in the Determination of Total Iron in Potable Waters as Iron(II)- 1,10-Phenanthroline at A Single-Use Screen-Printed Carbon Sensor Device,” Talanta, Vol. 71, No. 1, 2007, pp. 202-207. http://dx.doi.org/10.1016/j.talanta.2006.03.051

has been cited by the following article:

• TITLE: Preparation and Properties of a New Carbon Paste Iron Selective Electrodes and Their Applications

  AUTHORS: Refat F. Aglan, Mahmoud S. Rizk, Gehad G. Mohamed, Ahmed H. El-Wahy, Hala A. Mohamed

  KEYWORDS: Triazol Ionophores; Ferrous Ion Determination; Modified Carbon Paste Electrodes

  JOURNAL NAME: American Journal of Analytical Chemistry, Vol.5 No.2, January 27, 2014

  ABSTRACT: The new ferrous-selective modified carbon paste electrodes (I and II) based on 5,5’-(propane-1,3-diylbis(sulfanediyl))bis(3-benzyl-4H-1,2,4-triazol-4-amine) (electrode I, A-ionophore) and 5,5’-(butane-1,4-diyl-bis(sulfane- diyl))bis(3-benzyl-4H-1,2,4-triazol-4-amine) (electrode II, B-ionophore) as ionophores are described. These electrodes exhibit Nernstian slopes of 30.2 ± 0.5 and 29.1 ± 0.5 mV·decade-1, linear range of 1.0 × 10-7 - 1.0 × 10-2 mol·L-1 Fe(II) ion and detection limit of 1.0 × 10-7 mol·L-1 Fe(II) ion for electrode (I) and electrode (II), respectively. Both electrodes (I and II) have a fast response time of about 15 sand can be used for at least 3 months. The two electrodes revealed a good selectivity for Fe(II) over a wide variety of other metal ions and could be used in the pH range of 1.8 - 3.0 without any divergence in potential. The proposed sensors were successfully applied for the determination of Fe(II) ion in different real samples.