D. Chirvase, J. Parisi, J. C. Hummelen and V. Dyakonov, “Influence of Nanomorphology on the Photovoltaic Action of Polymer-Fullerene Composites,” Nanotechnology, Vol. 15, No. 9, 2004, p. 1317.
http://dx.doi.org/10.1088/0957-4484/15/9/035

has been cited by the following article:

• TITLE: Influence of Thickness and Annealing Temperature on the Optical Properties of Spin-Coated Photoactive P3HT:PCBM Blend

  AUTHORS: Md. Shahinul Islam, Md. Earul Islam, Abu Bakar Md. Ismail, Hartmut Baerwolff

  KEYWORDS: Organic Semiconductor; Photoactive Polymer; Bulk Heterojunction; Solar Energy Materials

  JOURNAL NAME: Optics and Photonics Journal, Vol.3 No.8A, December 30, 2013

  ABSTRACT: Influence of annealing temperature and thickness on the optical characteristics of the blend of poly (3-hexylthiophene) (P3HT) and Phenyl C61 butyric acid methylester (PCBM) layer has been investigated in this report. Photoactive polymer material (P3HT:PCBM) was deposited on indium tin oxide (ITO) substrate by spin-coating. The morphology of P3HT:PCBM composite layer was investigated by Atomic Force Microscope (AFM). The surface roughness was found to reduce after heat treatment. The absorption of the composite layer was found to increase with its number of layer (thickness). On the other hand, the photoluminescence (PL) quenching, which indicates efficient charge separation in the bulk heterojunction, was found higher for the thinner layer. Absorption was also found to increase with the annealing temperature. Therefore, to optimize the thickness of the P3HT:PCBM photoactive layer that will provide best absorption while providing efficient charge separation, annealing at optimized temperature might be an effective tool.