TITLE:
Preparation of Composite Particles by Forming Pickering Emulsion Followed by Drying-In-Liquid and Effect of Stepwise Addition of Solid Powder on Structure of Composite Particles
AUTHORS:
Yasushi Akutsu, Yoshinari Taguchi, Masato Tanaka
KEYWORDS:
Composite Particles; Pickering Emulsion; Drying-In-Liquid Method; Liquid-Liquid Dispersion; Magnetite; Titanium Dioxide
JOURNAL NAME:
Materials Sciences and Applications,
Vol.4 No.12,
December
6,
2013
ABSTRACT:
It was tried to prepare composite particles made of polymer and two kinds of solid powders by forming Pickeringemulsion followed by the drying-in-liquid method and to investigate how the stepwise addition of solid powders affected the contained ratio and adhesion ratio of solid powders and the structure of composite particles. Limonene oil dissolving expanded polystyrene and ethylene glycol were adopted as the dispersed phase and the continuous phase, respectively. Magnetite and titanium dioxide were used as solid powders. Magnetite was added before or after formation of the (O/W) dispersion. Titanium dioxide was added at the various elapsed times from addition of magnetite. Titanium dioxide adhered only on the surface of composite particles irrespective of addition time. At the earlier addition of both solid powders, the surface-covering type composite particles were prepared. At the latter addition of titanium dioxide, a part of magnetite adhered on the surface and the remainder was dispersed into composite particle.