O. Ohtaka, R. Von Der Mühll and J. Ravez, “Low-Temperature Sintering of Pb(Zr,Ti)O3 Ceramics with the Aid of Oxyfluoride Additive: X-Ray Diffraction and Dielectric Studies,” Journal American Ceramic Society, Vol. 78, No. 3, 1995, pp. 805-808. doi:10.1111/j.1151-2916.1995.tb08251.x

has been cited by the following article:

• TITLE: Study of Dielectric and Piezoelectric Properties in the Ternary System Pb0.98Ca0.02[{(Zr0.52Ti0.48)0.98(Cr3+0.5 , Ta5+0.5)0.02}1–zPz]O3 Doping Effects

  AUTHORS: Hamzioui Louanes, Kahoul Fares, Abdessalem Nora, Boutarfaia Ahmed

  KEYWORDS: PZT; Piezoelectricity; Electronic Materials; Dielectric Properties; Methods Physico-Chemical of Analysis

  JOURNAL NAME: Materials Sciences and Applications, Vol.3 No.1, January 12, 2012

  ABSTRACT: The effects of P2O5 oxide on microstructure, dielectric and piezoelectric properties of Pb0.98Ca0.02[{(Zr0.52Ti0.48)0.98( Cr3+1/2,Ta5+1/2)0.02}1–zPz]O3 ternary ceramics were investigated. Specimens with various contents of P2O5 from 0 to 12 wt. % were prepared by a conventional oxide mixing technique. The effect of P2O5 doping with regard to the development of the crystalline phase, density, microstructure, dielectric, ferroelectric and piezoelectric characteristics has been investigated. It has been found that the sintering temperature of piezoelectric Pb0.98Ca0.02[{(Zr0.52Ti0.48)0.98(Cr3+1/2,Ta5+1/2)0.02}1–zPz]O3 can be reduced by phosphorus addition without compromising the dielectric properties. A sintered density of 94 % of the theoretical density was obtained for 4 wt. % P2O5 addition after sintering at 1050°C for 4 h. Ceramics sintered at 1050°C with 4 wt. % P2O5 achieve excellent properties, which are as follows: kp = 0.73, ρ = 0.09 × 10+4 (Ω. cm), εr = 18800, tanδ = 0.0094 and Tc = 390°C.