SCIRP Mobile Website
Paper Submission

Why Us? >>

  • - Open Access
  • - Peer-reviewed
  • - Rapid publication
  • - Lifetime hosting
  • - Free indexing service
  • - Free promotion service
  • - More citations
  • - Search engine friendly

Free SCIRP Newsletters>>

Add your e-mail address to receive free newsletters from SCIRP.


Contact Us >>

WhatsApp  +86 18163351462(WhatsApp)
Paper Publishing WeChat
Book Publishing WeChat

Article citations


Long, X. and Khanna, S.K. (2003) Numerical Simulation of Residual Stresses in a Spot Welded Joint. Journal of Engineering Materials and Technology, 125, 222-226.

has been cited by the following article:

  • TITLE: Prediction and Verification of Resistance Spot Welding Results of Ultra-High Strength Steels through FE Simulations

    AUTHORS: Oscar Andersson, Arne Melander

    KEYWORDS: Resistance Spot Welding, FE Simulations, High Strength Steel, Material Modeling, Weld Size

    JOURNAL NAME: Modeling and Numerical Simulation of Material Science, Vol.5 No.1, January 12, 2015

    ABSTRACT: Resistance spot welding (RSW) is the most common welding method in automotive engineering due to its low cost and high ability of automation. However, physical weldability testing is costly, time consuming and dependent of supplies of material and equipment. Finite Element (FE) simulations have been utilized to understand, verify and optimize manufacturing processes more efficiently. The present work aims to verify the capability of FE models for the RSW process by comparing simulation results to physical experiments for materials used in automotive production, with yield strengths from approximately 280 MPa to more than 1500 MPa. Previous research has mainly focused on lower strength materials. The physical weld results were assessed using destructive testing and an analysis of expulsion limits was also carried out. Extensive new determination of material data was carried out. The material data analysis was based on physical testing of material specimens, material simulation and comparison to data from literature. The study showed good agreement between simulations and physical testing. The mean absolute error of weld nugget size was 0.68 mm and the mean absolute error of expulsion limit was 1.10 kA.