The Adomian Decomposition Method for a Type of Fractional Differential Equations ()
1. Introduction
Fractional calculus can be dated back to the end of 17th century. In 1695, Leibniz and L’Hospital have discussed 1/2 order derivative, which is regarded as the birth of fractional differential equation. For a long time, fractional calculus does not attract enough attention. It is only considered and studied by many mathematicians. However, in last few decades, fractional calculus has been studied more and more in applied sciences and engineering. The fractional derivative has been applied in many physical problems such as frequency-dependent damping behavior of materials, motion of a large thin plate in a Newtonian fluid, creep and relaxation functions for viscoelastic materials etc. There are many authors who have demonstrated the application of fractional derivative like Oldham and Spainer [1] , Miller and Ross [2] , Podlubny [3] , Samko et al. [4] , Hilfer [5] . And more recently Sabiter et al. [6] have demonstrated the development and application of fractional calculus in physical and engineering. Other applications of fractional differential equations we can refer to [7] - [12] .
Fractional calculus is found to be more suitable modeling the process with long range interaction and physical problems described by fractional equations, but sometimes it’s difficult to get the solution of fractional differential equations. For that reason, we need a reliable and efficient technique for solving fractional differential equations. In [13] , Tamsir and Srivastava give an analytical study for time fractional Klein-Gordon equation. Chen et al. use the discrete method to study the time fractional Klein-Gordon equation [14] . Fewer researchers consider giving an approximate solution. In this paper, we give an analytical solution of the time fractional differential equation of the following form
. (1.1)
where,
is the fractional operator in Caputo sense,
. Except Caputo fractional derivative, there are many other different fractional derivatives, such as the Riemann-Liouville fractional derivative, Grünwald-Letnikov fractional derivative, Rietz fractional derivative etc. From the pure mathematical point, Riemann-Liouville derivative is somewhat more popular than Caputo derivative. Many earlier researchers use it instead of Caputo derivative, but for the Riemann-Liouville derivative we need to specify the values of certain fractional derivatives of the unknown solution at the initial conditions. However, when we deal with the concrete physical problem, the fractional derivative doesn’t have physical meaning. When we deal with the Caputo derivatives, we may only specify the integer order derivative. It has a clearly physical meaning and can be measured. Another reason we choose Caputo derivative is that under homogeneous conditions the equations with Riemann-Liouville operator are equivalent to the equations with Caputo operator, if we choose Caputo derivative it allows us to specify inhomogeneous initial conditions, too, if we needed.
This paper is organized as follows. In Section 2, we discuss some basic properties about fractional derivative and fractional integral which will be used in the following part. In Section 3, we introduce the Adomian decomposition method, and the detailed Scheme about the time fractional differential Equation (1.1) will be discussed. In Section 3, a numerical test will be showed, the approximate solution will be compared with the exact solution, and the error analysis will be given.
2. Fractional Integral and Fractional Derivative
First, we will give some definitions about fractional calculus including fractional integral and fractional derivative. For fractional derivative there are already exist several different definitions and in general these different definitions are not equivalent to each other. Here we only give the most common definition.
Definition 2.1. If
is continuous on
and
then the fractional integral is defined as
. (2.1)
Definition 2.2. If
is continuous on
and
then the Caputo fractional derivative is defined as
. (2.2)
Property 2.1. [3] If
is continuous on
and
,
then
. (2.3)
Property 2.2. [3] If
is continuous on
and
then
. (2.4)
Property 2.3. [3] If
is continuous on
and
then
. (2.5)
Here, we only give some basic properties about Caputo fractional derivative and fractional integral which we will use in the following part. For some other properties about Caputo fractional derivative and other definitions about fractional calculus we can refer to [4] .
3. Adomian Decomposition Method
The Adomian decomposition method [15] [16] is powerful tool for solving linear or nonlinear equations. For every nonlinear differential equation can be decomposed into the following form
, (3.1)
where L is the highest order differential operator,
is the remainder of the linear part,
represents the nonlinear part and g is a given function. In general, the operator L is invertible. If we take
on both sides of Equation (3.1), an equivalent expression can be given,
, (3.2)
where
satisfy
and the initial conditions. If L is the second order derivative,
is the two-fold definite integral. For the Adomian decomposition method, the solution u is expressed in terms of a series form,
. (3.3)
The nonlinear term
is represented by the Adomian polynomials
, i.e.
. (3.4)
depends on
and can be formulated by
. (3.5)
For clarity, first few several items of the Adomian polynomials will be listed
Then for the Equation (3.1), we have
. (3.6)
The Adomian’s technique is equivalent to the following relation which can be defined as
In theory, if we calculate all the terms
we can find the exact solution. In fact, we just need to compute the first finite terms. Cherruault et al. have proved the convergence of Adomian decomposition method [17] [18] . From some numerical tests of the following part, we can find that the sum of the first three or four terms has high accuracy. The more terms we calculate, the higher the accuracy.
4. Numerical Examples
In order to verify the accuracy of the method which described in the last section, two numerical examples will be considered.
Example 1.
, subject to the initial conditions
,
.
First, we take
on both sides of the example 1, the following relation is given
(3.7)
With the scheme we discussed in the last part, we have
Then the approximate solution is
. In order to test the accuracy of the approximate solution, we consider when
, the exact solution is
. Figure 1 shows the exact solution and the approximate solution with the first four terms.
Table 1 shows the error of the exact solution and the approximate solution. In this example, we only use the forst four terms to approximate the exact solution. From the error column we can find that the absolute error is very small, the Adomian decomposition method has a high convergence order. The more terms we use, the higher accuracy we get.
Example 2.
,
subject to the initial conditions
,
.
Similarly, with the procedure we used in the first example, we have the following result about
In this example we use the sum of the first three terms as the approximate solution of the problem we discussed. When we consider
, the exact solution is
. Figure 2 shows the exact solution and the approximate solution.
Table 2 shows the exact solution and approximate solution of the nonlinear fractional differential equation. In the last column we can find that the absolute error is small, here, we only use the first three terms to approximate the solution. If we use more terms, the approximation works better.
5. Conclusion
In this work, the Adomian decomposition method is applied to solving a time fractional differential equation. Both the linear and nonlinear type of fractional
Figure 1. Approximate solution and exact solution of example 1.
Figure 2. Approximate solution and exact solution of example 2.
Table 1. Error of exact solution and approximate solution, where
.
Table 2. Error of exact solution and approximate solution, where
.
differential equations are considered. From the numerical result, we can find that the Adomian decomposition method is an efficient algorithm. We use only first several terms to approximate the exact solution, the numerical result has high precision. In general, some differential equations are hard to deal with because of the nonlinear terms. The Adomian decomposition method is a powerful tool to cope with this problem. Moreover, no linearization or perturbation is required in this method.
Acknowledgements
This research was funded by the Humanity and Social Science Youth Foundation of Ministry of Education (No. 18YJC630120), the Applied Mathematics of Shanghai Dianji University (No. 16JCXK02).