[1]
|
K. C. Kao and G. A. Hockham, “Dielectric-Fibre Surface Waveguides For Optical frequencies,” Proc, IEE, Vol. 133, No. 7, 1966, pp.1151-1158
|
[2]
|
S. I. E. Lin, “Dust Cap for Fiber Optic Adapter,” US Patent No. 0310795, 2008.
|
[3]
|
S. I E. Lin, Fiber optic adapter with integrated shutter, US patent, 2009/0028507.
|
[4]
|
S. I. E. Lin, “Dust Shutter for Optical Adapter,” US Patent No. 0101758, 2008.
|
[5]
|
“SANWA Electronic Co. Laser Shutter,” Japanese Patent No. 2008-225133 A, 25 September 2008.
|
[6]
|
Fitel Product catalog, MPO Adapter with Shutter Design, Furukawa Electronics, Japan, 2010.
|
[7]
|
?. Tekaslan, N. Gerger and U. ?eker, “Determination of Spring-Back of Stainless Steel Sheet Metal in ‘V’ Bending Dies,” Materials and Design, Vol. 29, No. 5 ,2008, pp. 1043-1050. doi:10.1016/j.matdes.2007.04.004
|
[8]
|
C. C. Chang and F. M. Hsu, “Effects of Punch Radius and Offset on the Spring Back of Micro Right Angle Bending,” Master dissertation, National Kaohsiung Uni-
|
[9]
|
versity of Applied Sciences, Taiwan, 2007.
|
[10]
|
W. Y. Chiou and M. H. Chen, “The Optimal Design and Stress Analysis for SMT Spring Finger,” Master dissertation, National Kaohsiung University of Applied Sciences, Taiwan, 2010.
|
[11]
|
“MSC\Marc 2010 User Manual,” MSC Software Corporation, USA, 2010.
|
[12]
|
Y. Ueda, K. Lida, M. Saito and A. Okamoto, “Finite Element Model and Residual Stress Calculation for Multi-Pass Welded Joint between a Sheet Metal and the penetrating Pipe,” Modeling of Casting, Welding and Advanced Solidification Processes-V, 1991, pp. 219-227.
|
[13]
|
W. K. Dai, “A Study on Stent Plastic Forming,” Master dissertation, National Sun Yat-sen University, Taiwan, 2004.
|
[14]
|
D. Fratila and C. Caizar, “Application of Taguchi Method to Selection of Optimal Lubrication and Cutting Condi- tions in Face Milling of AlMg3,” Journal of Cleaner Pro- duction, Vol. 19, No. 6-7, 2011, pp. 640-645.
doi:10.1016/j.jclepro.2010.12.007
|
[15]
|
F. O. Sonmez and A. Demir, “Analytical Relations between Hardness and Strain for Cold Formed Parts,” Journal of Materials Processing Technology, Vol. 186, No. 1- 3, 2007, pp. 163-173. doi:10.1016/j.jmatprotec.2006.12.031
|