[1]
|
C. J. Fellows, F. Shaw, “A Laboratory Investigation of Glass to Mould Heat Transfer during Pressing,” Glass Technology, Vol. 19, No. 1, 1978, pp. 4-9.
|
[2]
|
D. H?hne, B. Pitschel, M. Merkwitz and R. L?big, “Measurement and Mathematical Modelling of the Heat Transfer in the Glass Forming Process, in consideration of the Heat Transfer Coefficients and Radiation Influences,” Glass Science and Technology, Vol. 76, No. 6, 2003, pp. 309-317.
|
[3]
|
P. Moreau, D. Lochegnies, S. Gregoire and J. César de Sa, “Analysis of Lubrication in Glass Blowing : Heat Transfer Measurements and Impact on Forming,” Glass Technology: European Journal of Glass Science and Technology, Part A, Vol. 49, No. 1, 2008, pp. 8-16.
|
[4]
|
W. C. Dowling, H. V. Fairbanks and W. A. Koehler, “A Study of the Effect of Lubricants on the Adherence of Molten Glass to Heated Metals,” Journal of the American Ceramic Society, Vol. 33, No. 9, 1950, pp. 269-273. doi:10.1111/j.1151-2916.1950.tb12797.x
|
[5]
|
P. Manns, W. D?ll, G. Kleer, “Glass in Contact with Mould Materials for Container Production,” Glastech Ber Glass Science and Technology, Vol. 68, No. 12, 1995, pp. 389-399.
|
[6]
|
D. Rieser, G. Spie? and P. Manns, “Investigations on Glass-to-Mold Sticking in the Hot Forming Process,” Journal of Non-Crystalline Solids, Vol. 354, 2008, pp. 1393-1397.
|
[7]
|
J. Pech, G. Berthomé, M. Jeymond and N. Eustathopoulos, “Influence of Glass/Mould Interfaces on Sticking,” Glass Science Technology, Vol. 78, No. 2, 2005, pp. 54-62.
|
[8]
|
K. D. Fischbach, K. Georgiadis, F. Wang, O. Dambon, F. Klocke, Y. Chen and A. Y. Yi, “Investigation of the Ef-fects of Process Parameters on the Glass-to-Mold Sticking Force during Precision Glass Molding,” Surface and Coatings Technology, Vol. 205, 2010, pp. 312-319.
doi:10.1016/j.surfcoat.2010.06.049
|
[9]
|
M. Falipou, C. Donnet, “Sticking Temperature Investiga- tions of Glass/Metal contacts—Determination of Influ- encing Parameters,” Glastech Ber Glass Science and Technology, Vol. 70, No. 5, 1997, pp. 137-145.
|
[10]
|
S. Gregoire, J. César de Sa, P. Moreau and D. Lochegnies, “Modelling of Heat Transfer at Glass/Mould Interface in Press and Blow Forming Process,” Computers and Struc-tures, Vol. 85, 2007, pp. 1194-1205.
doi:10.1016/j.compstruc.2006.11.023
|
[11]
|
R. Guilbaut, D. Lochegnies, P. Moreau, “In and Outside Vision of Glass Blow and Blow,” In: D. Lochegnies and P. Moreau, Eds., Proceedings of the 2nd International Colloquium Modelling of Glass Forming and Tempering, Valenciennes, France, Presses Universitaires de Valen-ciennes, 23-25 January, 2002, pp. 57-64.
|
[12]
|
H. Zhou and D. Li, “Mold Cooling Simulation of the Pressing Process in TV Panel Production,” Simulation Modelling Practice and Theory, Vol. 13, 2005, pp. 273-285. doi:10.1016/j.simpat.2004.11.006
|