Fuzzy and PI Controller Based SHAF for Mitigation of Current Harmonics with P-Q Method Using Matlab and RTDS Hardware
Suresh Mikkili, Anup Kumar Panda
DOI: 10.4236/epe.2011.34052   PDF    HTML     5,691 Downloads   9,230 Views   Citations

Abstract

The main objective of this paper is to develop PI and Fuzzy logic controllers to analyse the performance of instantaneous real active and reactive power (p-q) control strategy for extracting reference currents of shunt active filters under balanced, un-balanced and balanced non-sinusoidal conditions. When the supply voltages are balanced and sinusoidal, then all controllers converge to the same compensation characteristics. However, when the supply voltages are distorted and/or un-balanced sinusoidal, these control strategies result in different degrees of compensation in harmonics. The p-q control strategy with PI controller is unable to yield an adequate solution when source voltages are not ideal. Extensive simulations were carried out; simulations were performed with balance, unbalanced and non sinusoidal conditions. Simulation results validate the dynamic behaviour of Fuzzy logic controller over PI controller. The 3-ph 4-wire SHAF system is also implemented on a Real Time Digital Simulator (RTDS Hardware) to further verify its effectiveness. The detailed simulation and RTDS Hardware results are included.

Share and Cite:

Mikkili, S. and Panda, A. (2011) Fuzzy and PI Controller Based SHAF for Mitigation of Current Harmonics with P-Q Method Using Matlab and RTDS Hardware. Energy and Power Engineering, 3, 407-421. doi: 10.4236/epe.2011.34052.

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1] H. Akagi, H. Kanazawa and Y. Nabae, “Instantaneous Reactive Power Compensators Comprising Switching Devices without Energy Storage Components,” IEEE Transactions on Industry Applications, Vol. 20, No. 3, 1984, pp. 625-630.
[2] Z. Peng et al., “Harmonic and Reactive Power Compensation Based on the Generalized Instantaneous Reactive Power Theory for Three-Phase Four-Wire Systems,” IEEE Transactions on Power Electronics, Vol. 13, No. 5, 1998, pp. 1174-1181.
[3] M. I. M. Montero, et al., “Comparison of Control Strategies for Shunt Active Power Filters in Three-Phase Four-Wire Systems,” IEEE Transactions on Power Electronics, Vol. 22, No. 1. 2007, pp. 229-236.
[4] L. Gyugyi and E. C. Strycula, “Active AC Power Filters,” IEEE IIAS Annual Meeting, 1976, pp. 529-535.
[5] O. Vodyakho and C. Chris Mi Senior, “Three-Level Inverter-Based Shunt Active Power Filter in Three-Phase Three-Wire and Four-Wire Systems,” IEEE Transactions on Power Electronics, Vol. 24, No. 5, 2009, pp. 1350- 1363.
[6] M. Aredes, et al., “Three-Phase Four-Wire Shunt Active Filter Control Strategies,” IEEE Transactions on Power Electronics, Vol. 12, No. 2, 1997, pp. 311-318.
[7] H. Akagi, et al., “Instantaneous Power Theory and Applications to Power Conditioning,” IEEE Press/Wiley-Inter- Science 2007, Wiley Online, 2007, ISBN: 978-0-470- 10761-4.
[8] S. Mikkili and A. K. Panda, “Instantaneous Active and Reactive Power and Current Strategies for Current Harmonics Cancellation in 3-ph 4Wire SHAF with Both PI and Fuzzy Controllers,” Journal of Energy and Power Engineering, Vol.3, No.3, 2011, pp. 285-298.
[9] M. Suresh, A. K. Panda and Y. Suresh, “Fuzzy Controller Based 3Phase 4Wire Shunt Active Filter for Mitigation of Current Harmonics with Combined p-q and Id-Iq Control Strategies,” Journal of Energy and Power Engineering, Vol. 3, No.1, 2011, pp. 43-52.
[10] P. Salmeron and R. S. Herrera, “Distorted and Unbalanced Systems Compensation within Instantaneous Reactive Power Framework,” IEEE Transactions on Power Delivery, Vol. 21, No. 3, 2006, pp. 1655-1662.
[11] P. Rodriguez, et al., “Current Harmonics Cancellation in Three-Phase Four-Wire Systems by Using a Four-Branch Star Filtering Topology,” IEEE Transactions on Power Electronics, Vol.24, No. 8, 2009, pp. 1939-1950.
[12] S. Mikkili and A. K. Panda, “SHAF for Mitigation of Current Harmonics Using p-q Method with PI and Fuzzy Controllers,” Engineering, Technology & Applied Science Research, Vol. 1, No. 4, 2011, pp. 98-104.
[13] H. Akagi, “New Trends in Active Filters for Power Conditioning,” IEEE Transactions on Industry Applications, Vol. 32, No. 6, 1996, pp. 1312-1322.
[14] P. Kirawanich and R. M. O’Connell, “Fuzzy Logic Control of an Active Power Line Conditioner,” IEEE Transactions on Power Electronics, Vol. 19, No. 6, 2004, pp. 1574-1585.
[15] S. K. Jain et al., “Fuzzy Logic Controlled Shunt Active Power Filter for Power Quality Improvement,” IEEE Proceedings Electric Power Applications, Vol. 149, No. 5, 2002, pp. 317-328.
[16] S. Mikkili and A. K. Panda, “RTDS Hardware Implementation and Simulation of 3-ph 4-wire SHAF for Mitigation of Current Harmonics with p-q and Id-Iq Control Strategies Using Fuzzy Logic Controller,” International Journal of Emerging Electric Power Systems, be press Vol. 12, No. 5, 2011, pp..
[17] P. Forsyth, et al., “Real Time Digital Simulation for Control and Protection System Testing,” IEEE Proceedings Power Electronics Specialists Conference, Vol. 1, 20-25 June 2004, pp. 329-335.

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.