An Ultra Low-Voltage and Low-Power OTA Using Bulk-Input Technique and Its Application in Active-RC Filters
Arash Ahmadpour
DOI: 10.4236/cs.2011.23026   PDF    HTML     6,965 Downloads   12,843 Views  


This paper presents the design of a two-stage bulk-input pseudo-differential operational transconductance amplifier (OTA) and its application in active-RC filters. The OTA was designed in 90 nm CMOS process and operates at a single supply voltage of 0.5 V. Using a two-path bulk-driven OTA by the combination of two different amplifiers the DC gain and speed of the OTA is increased. Rail-to-rail input is made possible using the transistor’s bulk terminal as in input. Also a Miller-Feed-forward (MFF) compensation is utilized which is improved the gain bandwidth (GBW) and phase margin of the OTA. In addition, a new merged cross-coupled self-cascode pair is used that can provide higher gain. Also, a novel cost-effective bulk-input common-mode feedback (CMFB) circuit has been designed. Simplicity and ability of using this new merged CMFB circuit is superior compared with state-of-the-art CMFBs. The OTA has a 70.2 dB DC gain, a 2.5 MHz GBW and a 70.8o phase margin for a 20 PF capacitive load whereas consumes only 25 µw. Finally, an 8th order Butterworth active Biquadrate RC filter has been designed and this OTA was checked by a typical switched-capacitor (SC) integrator with a 1 MHz clock-frequency.

Share and Cite:

A. Ahmadpour, "An Ultra Low-Voltage and Low-Power OTA Using Bulk-Input Technique and Its Application in Active-RC Filters," Circuits and Systems, Vol. 2 No. 3, 2011, pp. 183-189. doi: 10.4236/cs.2011.23026.

Conflicts of Interest

The authors declare no conflicts of interest.


[1] E. Sanchez-Sinencio and A. G. Andreou, “Low-Voltage and Low Power Integrated Circuits and Systems,” Low- Voltage Mixed-Signal Circuits, IEEE Press, New York, 1998.
[2] A. N. Mohieldin, “High Performance Continuous-Time Filters for Information Transfer Systems,” Ph.D. Dissertation, Department of Electrical Engineering, Texas A & M University, College Station, 2003.
[3] S. Yan and Sanchez-Sinencio, “Low-Voltage Analog Circuit Design Techniques: A Tutorial,” IEICE Transactions on Analog Integrated Circuits and Systems, Vol. E00-A, No. 2, 2000, pp. 179-196.
[4] S. S. Rajput and S. S. Jamuar, “Low-Voltage Analog Circuit Design Techniques,” IEEE Circuit and System Magazine, Vol. 2, No. 1, 2002, pp. 24-42.
[5] S. Chatterjee, Y. Tsvidis and P. Kinget, “0.5 V Analog Circuit Techniques and Their Application to OTA and Filter Design,” IEEE Journal of Solid State Circuits, Vol. 40, No. 12, 2005, pp. 2373-2387. doi:10.1109/JSSC.2005.856280
[6] M. Trakimas and S. Sonkusale, “A 0.5 V Bulk-Input OTA with Improved Common-Mode Feedback for Low-Frequency Filtering Applications,” Analog Integrated Circuits and Signal Processing, Springer Press, New York, 2009, pp. 83-89.
[7] A. Ahmadpour and R. Fouladi, “A Modified High-Performance Structure of Low-Voltage CMOS Op-Amp,” Proceeding of the 2008 IEEE International Conference on Electron Devices and Solid-State Circuits, Hong Kong, 8-10 December 2008, pp. 1-5. doi:10.1109/EDSSC.2008.4760687
[8] A. Ahmadpour, “An Ultra Low-Voltage and High-Speed Amplifier for Switched-Capacitor Applications,” 6th International Conference on Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology, Vol. 1, Pattaya, 6-9 May 2009, pp. 552-555.
[9] M. Dessouky and A. Kaiser, “Very Low-Voltage Digital-Audio Modulator with 88-dB Dynamic Range Using Local Switch Bootstrapping,” IEEE Journal of Solid-State Circuits, Vol. 36, No. 3, March 2001, pp. 349-355. doi:10.1109/4.910473
[10] R. Schaumann and M. E. Van Valkenburg, “Design of Analog Filters,” Oxford University Press, Oxford, 2001.

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.