Design of Axial-Flux Motor for Traction Application
Nadia Chaker, Ibrahim Ben Salah, Souhir Tounsi, Rafik Neji
DOI: 10.4236/jemaa.2009.12012   PDF    HTML     12,229 Downloads   22,777 Views   Citations


This paper deals with the design of high power – low dimensions axial-flux permanent-magnet motor intended for trac-tion application. First, two motor configurations are analytically designed and compared using finite element calcula-tion. Then, the configuration yielding the best performances is integrated and modelled with the whole traction chain under MATLAB/SIMULINK environment in order to demonstrate the motor operation on a large speed band.

Share and Cite:

N. Chaker, I. Salah, S. Tounsi and R. Neji, "Design of Axial-Flux Motor for Traction Application," Journal of Electromagnetic Analysis and Applications, Vol. 1 No. 2, 2009, pp. 73-84. doi: 10.4236/jemaa.2009.12012.

Conflicts of Interest

The authors declare no conflicts of interest.


[1] Y. Amara, “Contribution à la conception et à la commande des machines synchrones à double excitation, Application au véhicule hybride,” Thèse de doctorat, université, PARIS VI, 2001.
[2] A. Parviainen, “Design of axial-flux permanent-magnet low-speed machines and performance comparison between radial-flux and axial-flux machines,” thesis of doctorate, Lappeeranta University of Technology, Lappeeranta, Finland, 2005.
[3] A. Parviainen, M. Niemela, J. Pyrhonen, J. Mantere, “Performance comparison between low-speed axial-flux and radial flux permanent-magnet machines including mechanical constraints,” Electric Machines and Drives, IEEE International Conference, pp. 1695–1702, 2005.
[4] S. Tounsi, “Modélisation et optimisation de la motori- sation et de l’autonomie d’un véhicule électrique,” Thèse de doctorat en Génie Electrique, Ecole Nationale d’Ingénieurs de Sfax-Tunisie, 2006.
[5] B. Multon and J. Bonal, “Les entra?nements électro- magnétiques directs: Diversité, contraintes et solutions, La conversion électromécanique directe,” - ENS Cachan – SEE, 1999.
[6] P. Kurronen, “Torque vibration model of axial-flux surface-mounted permanent magnet synchronous machine,” Dissertation, Lappeenranta University of Technology, Finland, 2003.
[7] B. Tounsi, “Etude comparative de groupes électrogènes embarqués à large gamme de vitesse variable associant machines à aimants permanents et conversion statique,” Thèse de Doctorat, INP Toulouse, 2006.
[8] S. Tounsi, R. Neji, and F. Sellami, “Contribution à la conception d’un Actionneur à Aimants Permanents pour Véhicules Electriques en vue d’Optimiser l’Autonomie,” Revue Internationale de Génie Electrique, RIGE, Vol. 9/6, pp. 693-718, Edition Lavoisier, 2006.
[9] C. Cavallaro, A. O. Di Tommaso, R. Miceli, A. Raciti, G. R. Galluzzo, and M. Trapanese, “Efficiency enhancement of permanent-magnet synchronous motor drives by online loss minimization approaches,” IEEE Transactions on Industrial Electronics, Vol. 52, No. 4, pp. 1153-1160, 2005.
[10] R. Neji, S. Tounsi, and F. Sellami, “Contribution to the definition of a permanent magnet motor with reduced production cost for the electrical vehicle propulsion,” European Transactions on Electrical Power, ETEP, Vol. 16, No. 4, pp. 437-460, 2006.
[11] R. Neji, S. Tounsi, and F. Sellami, “Optimization and design for a radial flux permanent magnet motor for electric vehicle,” Journal of Electrical Systems, JES, Vol. 1, No. 4, 2005.
[12] N. Chaker, “Conception et commande d’un moteur à aimant permanent à flux axial pour véhicule électrique,” Mémoire de Mastère en génie électrique, Ecole Nationale d’Ingénieurs de Sfax, Tunisie, 2006.
[13] MAXWELL? 2D (2002) Student Version; A 2D Magnetostatic Problem.
[14] F. Khatounian, S. Moreau, J. P. Louis, E. Monmasson, F. Louveau, and J. M. Alexandre, “Modeling and simulation of a hybrid dynamic system used in haptic interfaces,” Electrimacs, Hammamet, Tunisie, 2005.
[15] G. Kayhan, A. A. Ahmed, and P. Halit, “Improving the performance of hysteresis direct torque control of IPMSM using active filter topology,” Sˉadhanˉa, Vol. 31, Part 3, pp. 245–258, 2006.

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.