[1]
|
A. Talekar, D. Chandra, R. Chellapa, J. Daemen, N. Tamura and M. Kunz, “Oxidation Kinetics of High Strength Low Alloy Steels at Elevated Temperatures,” Corrosion Science, Vol. 50, No. 10, 2008, pp. 2804-2815. doi:10.1016/j.corsci.2008.08.008
|
[2]
|
F. Velasco, A. Bautista and A. Gonzalez-Centeno, “High-Temperature Oxidation and Aqueous Corrosion Performance of Ferritic, Vacuum-Sintered Stainless Steels Prealloyed with Si,” Corrosion Science, Vol. 51, No. 1, 2009, pp. 21-27. doi:10.1016/j.corsci.2008.09.035
|
[3]
|
Y. Ashida, L. G. McMillin and G. Taylor, “The Effect of Temperature Oscillation on the Passive Corrosion Properties of Alloy 22,” Electrochemistry Communications, Vol. 9, No. 5, 2007, pp. 1102-1106. doi:10.1016/j.elecom.2007.01.006
|
[4]
|
US Department of Energy, Office of Science, “Basic Research Needs for Advanced Nuclear Energy Systems: Report of Basic Energy Sciences Workshop,” Washington DC, 2006, pp. 113-120.
|
[5]
|
US Department of Energy, Office of Science, “Materials Under Extreme Environments: Report of Basic Energy Sciences Workshop,” Washington DC, 2007, pp. 83-89.
|
[6]
|
M. J. Alinger, G. R. Odette and D. T. Hoelzer, “The Development and Stability of Y-Ti-O Nanoclusters in Mechanically Alloyed Fe-Cr Based Ferritic Alloys,” Journal of Nuclear Materials, Vol. 329-333, 2004, pp. 382-386. doi:10.1016/j.jnucmat.2004.04.042
|
[7]
|
W. F. Wang and M. J. Wu, “Effect of Silicon Content and Aging Time on Density, Hardness, Toughness and Corrosion Resistance of Sintered 303LSC-Si Stainless Steels,” Materials Science and Engineering: A, Vol. 425, No. 1-2, 2006, pp. 167-171. doi:10.1016/j.msea.2006.03.050
|
[8]
|
W. T. Tsai, Y. N. Wen, J. T. Lee, H. Y. liou and W. F. Wang, “Effect of Silicon Addition on the Microstructure and Corrosion Behavior of Sintered Stainless Steel,” Surface and Coatings Technology, Vol. 34, No. 3, 1988, pp. 209-217. doi:10.1016/0257-8972(88)90113-2
|
[9]
|
T. K. Rout, “Electrochemical Impedance Spectroscopy Study on Multi-Layered Coated Steel Sheets,” Corrosion Science, Vol. 49, No. 2, 2007, pp. 794-817. doi:10.1016/j.corsci.2006.06.008
|
[10]
|
X. Zhao, Y. Zuo, J. Zhao, J. Xiong and Y. Tang, “A Study on the Self-Sealing Process of Anodic Films on Aluminum by EIS,” Surface and Coatings Technology, Vol. 200, No. 24, 2006, pp. 6846-6853. doi:10.1016/j.surfcoat.2005.10.031
|
[11]
|
A. Bautista, A. Gonzalez-Centeno, G. Blanco and S. Guzman, “Application of EIS to the Study of Corrosion Behavior of Sintered Ferritic Stainless Steels before and after High-Temperature Exposure,” Materials Characterization, Vol. 59, No. 1, 2008, pp. 32-39. doi:10.1016/j.matchar.2006.10.008
|