[1]
|
A. B. Abrahamsen, N. Mijatovic, E. Seiler, et al., “Superconducting Wind Turbine Generators,” Superconductor Science and Technology, Vol. 23, 2010, pp. 1-8. doi:10.1088/0953-2048/23/3/034019
|
[2]
|
S. Gregory, “Progress on High Temperature Superconductor Propulsion Motors and Direct Drive Wind Generators,” the 2010 International Power Electronics Conference, Sapporo, 2010.
|
[3]
|
L. Clive and J. Müller, “A Direct Drive Wind Turbine HTS Generator,” IEEE Power Engineering Society General Meeting, Tampa, Florida, USA, 2007, pp. 1-8.
|
[4]
|
X. T. Duan, X. Y. Zhang, J. Zhang, et al., “Finite Element Based Electromagnetic Field Simulation and Analysis of Doubly Fed Induction Generator,” Power System Technology, Vol. 36, February 2012, pp. 231-236.
|
[5]
|
H. Li and Z. Chen, “Overview of Difference Wind Generator Systems and Their Comparisons,” IET Renewable Power Generation, Vol. 2, February 2008, pp. 123-138. doi:10.1049/iet-rpg:20070044
|
[6]
|
S. He, W. Q. Wang, X. Y. Zhang, et al., “Electromagnetic Field Calculation of High Capacity Direct-Driven Permanent Magnet Synchronous Wind Power Generator Based on Finite Element Method,” Power System Technology, Vol. 34, March 2010, pp. 157-161.
|
[7]
|
H. Ohsaki, Y. Terao and M. Sekino, “Wind Turbine Generators using Superconducting Coils and Bulks,” Journal of Physics, Vol. 234, 2010, pp. 1-6. doi:10.1088/1742-6596/234/3/032043
|
[8]
|
A. B. Abrahamsen, N. Mijatovic, E. Seiler, et al., “Design Study of 10 kW Superconducting Generator for Wind Turbine Applications,” IEEE Transactions on Applied Superconductivity, Vol. 19, 2009, pp. 678-1681. doi:10.1109/TASC.2009.2017697
|
[9]
|
K. S. Ship and J. K. Sykulski, “Feild Simulation Studies for a High Temperature Superconducting Synchronous Generator with a Coreless Rotor,” IEE Proceedings of Science, Measurements and Technology, Vol. 151, pp. 414-418.
|
[10]
|
M. K. Al-Mosawi, C. Beduz and Y. Yang, “Construction of a 100 kVA High Temperature Superconducting Synchronous Generator,” IEEE Transactions on Applied Superconductivity, Vol. 15, 2005, pp. 2182-2185. doi:10.1109/TASC.2005.849607
|
[11]
|
H. M. Wen, B. Wendell, G. Kevin, et al., “Performance Test of a 100 kW HTS Generator Operating at 67K-77K,” IEEE Transactions on Applied Superconductivity, Vol. 9, 2009, pp. 652-1655.
|
[12]
|
X. H. Li, Y. G. Zhou, L. Han, et al., “Design of a High Temperature Superconducting Generator for Wind Power Applicaton,” IEEE Transactions on Applied Superconductivity, Vol. 21, 2011, pp. 155-1158.
|
[13]
|
K. F. Goddard, B. Lukasik and J. K. Sykulski, “Alternative Designs of High-Temperature Superconducting Synchronous Generators,” IEEE Transactions on Applied Superconductivity, Vol. 19, 2009, pp. 3805-3811. doi:10.1109/TASC.2009.2031626
|
[14]
|
H. M. Wen, W. Bailey, M. K. Al-Mosawi, et al., “Further Testing of an "Iron-Cored" HTS Synchronous Generator Cooled by Liquid Air,” IEEE Transactions on Applied Superconductivity, Vol. 21, 2011, pp. 1163-1166. doi:10.1109/TASC.2010.2093487
|
[15]
|
S. Hidehiko, T. Teppei, M. Takaya, et al., “Development of an Axial Flux Type PM Synchronous Motor with the Liquid Nitrogen Cooled HTS Armature Windings,” IEEE Transactions on Applied Superconductivity, Vol. 17, 2007, pp.1637-1640.
|
[16]
|
B. Lukasik, K. F. Goddard and J. K. Sykulski, “Finite Element Assisted Method of Estimating Equivalent Circuit Parameters for a Superconducting Synchronous Generator with a Coreless Rotor,” IEEE Transactions on Magnetics, Vol. 45, 2009, pp. 1226-1229. doi:10.1109/TMAG.2009.2012572
|
[17]
|
K. S. Ship, K. F. Goddard and J. K. Sykulski, “Field Optimization in a Synchronous Generator with High Temperature Superconducting Field Winding and Magnetic Core,” IEE Proceedings of Science, Measurement and Technology, Vol. 149, 2002, pp. 194-198. doi:10.1049/ip-smt:20020641
|
[18]
|
B. Lukasik, K. F. Goddard and J. K. Sykulski, “Finite-element Assisted Method to Reduce Harmonic Content in the Air-gap Flux Density of a High-temperature Superconducting Coreless Rotor Generator,” IET Science, Measurement and Technology, Vol. 12, 2008, pp. 485-492.
|