Investigation on the performance of DI-BSCCO superconducting electric motor
Chin Kat Meng, Nasri A. Hamid, Mohd. Yusri Abd. Rahman
DOI: 10.4236/ns.2011.31004   PDF    HTML     5,477 Downloads   10,922 Views   Citations


Superconducting electrical devices have been developed in various fields especially in industrial energy over a decade. Superconducting motor is one of the electrical devices that attracted the attention of engineers and researchers from the universities and industries due to its distinctive energy efficiency. This paper describes the performance of superconducting electric motor and its performance was compared with conventional copper electric motor. Direct current (DC) synchronous single- phase series motor has been chosen as the base for development of both motors. Two prototypes of electric motor fabricated using conventional copper coil and superconducting coil were developed with similar motor type, design, dimension, and features. The superconducting motor coil was wound using Bi-2223 (DI-BSCCO) Type H wires developed by Sumitomo Electric Industries Limited, Japan. A finite element analysis was performed to get a clear view on flux plots of the magnetic induction. Features of the superconducting motor and the special coil frame designed to protect the superconducting wire was also presented in this paper. In addition, the torque performances for both types of motor were measured. The superconducting electric motor was found to consume lower power to produce the same output compared with the conventional copper-wound motor.

Share and Cite:

Meng, C. , Hamid, N. and Rahman, M. (2011) Investigation on the performance of DI-BSCCO superconducting electric motor. Natural Science, 3, 36-41. doi: 10.4236/ns.2011.31004.

Conflicts of Interest

The authors declare no conflicts of interest.


[1] Schiferi, R., Flory, A., Livoti, W.C. and Umans, S. (2006) High temperature superconducting synchronous motors, economic issues for industrial applications. Petroleum and Chemical Industry Conference, Industry Applications Society 53rd Annual Meeting, Philadelphia, Pennsylvania, 2006, 1-9.
[2] Okazaki, T., Hayashi, K. and Sato K. (2006) Industrial applications of HTSC coils using next generation BSCCO wire. SEI Technical Review, 61, 24-28.
[3] Ayai N., Kato, Fujikami, J., Fujino, K., Kobayashi, S., Ueno, E., Yamazaki, K., Kikuchi, M., Ohkura, K., Hayashi, K., Sato, K. and Hata, R. (2006) DI-BSCCO wires by controlled over pressure sintering. Journal of Physics: Conference Series, 43, 47-50.
[4] Chu, C.W. (2000) High temperature superconducting materials: present status, future challenges, and one recent example – the superconducting ferromagnet. Physica C, 341-348, 25-30.
[5] Noe, M. and Oswald, B.R. (1999) Technical and economical benefits of superconducting fault current limiter in power systems. IEEE Transactions on Applied Superconductivity, 9, 1347-1350. doi:10.1109/77.783552
[6] Friedman, A., Shaked, N., Perel, E., Sinvani, M., Wolfus, Y. and Yeshurun, Y. (1999) Superconducting magnetic energy storage device operating at liquid nitrogen temperatures. Cryogenics, 39: 53-58. doi:10.1016/S0011-2275(98)00126-X
[7] McCulloch, M.D. and Dew-Hughes D. (1998) Brushless AC machines with high temperature superconducting rotors. Materials Science and Engineering B, 53, 211-215. doi:10.1016/S0921-5107(97)00329-2
[8] Iwakuma, M., Tomioka, A., Konno, M., Hase, Y., Satou, T., Iijima, Y., Saitoh, T., Yamada, Y., Izumi, T. and Shiohara, Y. (2007) Development of a 15 kW motor with a fixed YBCO superconducting field winding. IEEE Transactions on Applied Superconductivity, 17, 1607- 1610. doi:10.1109/TASC.2007.898480
[9] Jabbar, M.A. and Yeo, S.W. (2000) A New Architecture of Design Software for Electric Motors. Proceedings of Electrical and Computer Canadian Conference, 1, 360-364.
[10] Edmonds, J.S., Sharma, D.K., Jordan, H.E., Edick, J.D. and Schiferi, R.F. (1992) Application of high temperature superconductivity to electric motor design. IEEE Transactions on Energy Conversion, 7, 322-329. doi:10.1109/60.136228
[11] Fitzgerald, A.E., Kingslev, J. and Umans, S.D. (1990) Electric Machinery. McGraw Hill, New York.
[12] Hsu, J.S. (2001) Flux guides for permanent magnet machines. IEEE Transactions on Energy Conversion, 16, 186-191. doi:10.1109/60.921471
[13] Song, M., Yoon, Y.S., Jang, W.K., Ko, T., Hong, G.W., Jang, I.B. (1999) The design, manufacture and characteristic experiment of a small-scaled high-Tc superconducting synchronous motor. IEEE Transactions on Applied Superconductivity, 9, 1241-1244. doi:10.1109/60.921471
[14] Kirtley Jr J.L. (1999) Applications of superconductors in electric utility systems. IEEE Power Engineering Society Summer Meeting, 2, 1181-1186.

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.