[1]
|
Y. Sun, J. Liu and Z. Li, “Design of Highly Ordered Ag-SrTiO3 Nanotube Arrays for Photocatalytic Degradation of Methyl Orange,” Journal Solid State Chemistry, Vol. 184, No. 8, 2011, pp. 1924-1930.
doi:10.1016/j.jssc.2011.05.037
|
[2]
|
G. Wang, Y. Qin, J. Cheng and Y. Wang, “Influence of Zn Doping on the Photocatalytic Property of SrTiO3,” Journal of Fuel Chemistry and Technology, Vol. 38, No. 4, 2010, pp. 502-507.
doi:10.1016/S1872-5813(10)60042-4
|
[3]
|
J. Wang, S. Yin, M. Komatsu, Q. Zhang, F. Saito and T. Sato, “Preparation and Characterization of Nitrogen Doped SrTiO3 Photocatalyst,” Journal of Photochemistry and Photobiology A: Chemistry, Vol. 165, No. 1-3, 2004, pp. 149-156. doi:10.1016/j.jphotochem.2004.02.022
|
[4]
|
A. Jia, Z. Su, L. Lou and S. Liu, “Synthesis and Characterization of Highly-Active Nickel and Lanthanum Co Doped SrTiO3,” Solid State Science, Vol. 12, No. 7, 2010, pp. 1140-1145.
doi:10.1016/j.solidstatesciences.2010.04.005
|
[5]
|
J. Wang, H. Li, H. Li, S. Yin and T. Sato, “Preparation and Photocatalytic Activity of Visible Light-Active Sulfur and Nitrogen Co-Doped SrTiO3,” Solid State Science, Vol. 11, No. 1, 2009, pp. 182-188.
doi:10.1016/j.solidstatesciences.2008.04.010
|
[6]
|
T. Ohno, T. Tsubota, Y. Nakamura and K. Sayama, “Pre paration of S, C Cation-Codoped SrTiO3 and Its Photocatalytic Activity under Visible Light,” Applied Catalysis A: General, Vol. 288, No. 1-2, 2005, pp. 74-79.
doi:10.1016/j.apcata.2005.04.035
|
[7]
|
M. Miyauchi, M. Takashio and H. Tobimatsu, “Photocatalytic Activity of SrTiO3 Codoped with Nitrogen and Lanthanum under Visible Light Illumination,” Langmuir, Vol. 20, No. 1, 2004, pp. 232-236.
doi:10.1021/la0353125
|
[8]
|
J. Wang, S. Yin, M. Komatsu and T. Sato, “Lanthanum and Nitrogen Co-Doped SrTiO3 Powders as Visible Light Sensitive Photocatalyst,” Journal of the European Ceramic Society, Vol. 25, No. 13, 2005, pp. 3207-3212.
doi:10.1016/j.jeurceramsoc.2004.07.027
|
[9]
|
A. Kasahara, K. Nukumizu, G. Hitoki, T. Takata, J.N. Kondo, M. Hara, H. Kobayashi and K. Domen, “Photoreactions on LaTiO2N under Visible Light Irradiation,” The Journal of Physical Chemistry A, Vol. 106, No. 29, 2002, pp. 6750-6753. doi:10.1021/jp025961+
|
[10]
|
S. Farhikhteh, A. Maghsoudipour and B. Raissi, “Synthesis of Nanocrystalline YSZ (ZrO2-8Y2O3) Powder by Polymerized Complex Method,” Journal of Alloys and Com pounds, Vol. 491, No. 1-2, 2010, pp. 402-405.
doi:10.1016/j.jallcom.2009.10.196
|
[11]
|
J. P. Zhao, M. H. Quan and L. Zhang, “Preparation of Potassium Lithium Niobate Powders with Low Li Content via the Pechini Method,” Ceramics International, Vol. 32, No. 7, 2006, pp. 843-846.
doi:10.1016/j.ceramint.2005.05.010
|
[12]
|
S. Qiu, H. Fan and X. Zheng, “Pb(Zr0.95Ti0.05)O3 Powders Synthesized by Pechini Method: Effect of Molecular Weight of Polyester on the Phase and Morphology,” Journal of Sol-Gel Science and Technology, Vol. 42, No.1, 2007, pp. 21-26. doi:10.1007/s10971-006-1509-3
|
[13]
|
B. Dcullity, “Elements of X-Ray Diffraction,” 3rd Edition, Addison-Wesley Publishing Co., Boston, 1976.
|
[14]
|
S. X. Liu, X. Y. Chen and X. Chen, “Preparation of N-Doped Visible Light Response Nanosize TiO2 Photocatalyst Using the Acid-Catalyzed Hydrolysis Method,” Chinese Journal of Catalysis, Vol. 27, No. 8, 2006, pp. 697-702. doi:10.1016/S1872-2067(06)60037-5
|
[15]
|
D. C. Cronemeyer, “Infrared Absorption of Reduced Rutile TiO2 Single Crystals,” Physical Review, Vol. 113, No. 5, 1959, pp. 1222-1226. doi:10.1103/PhysRev.113.1222
|
[16]
|
A. J. Nelson, T. Buuren, T. M. Willey, C. Bostedt, J. J. Adams, K. I. Schaffers, L. Terminello and T. A. Callcott, “Electronic Structure of Lanthanum Calcium Oxoborate LaCa4O(BO3)3,” Journal of Electron Spectroscopy and Re lated Phenomena, Vol. 137-140, No. 2004, pp. 541-546.
|
[17]
|
S. Mart?nez-Mendez, Y. Henr?quez, O. Dom?nguez, L. D’Ornelas and H. Krentzien, “Catalytic Properties of Silica Supported Titanium, Vanadium and Niobium Oxide Nanoparticles towards the Oxidation of Saturated and Unsaturated Hydrocarbons,” Journal of Molecular Catalysis A: Chemical, Vol. 252, No. 1-2, 2006, pp. 226 234. doi:10.1016/j.molcata.2006.02.041
|
[18]
|
M. Ziolek and I. Nowak, “Characterization Techniques Employed in the Study of Niobium and Tantalum-Containing Materials,” Catalysis Today, Vol. 78, No. 1-4, 2003, pp. 543-553. doi:10.1016/S0920-5861(02)00353-X
|
[19]
|
R. E. Tanner, Y. Liang and E. I. Altman, “Structure and Chemical Reactivity of Adsorbed Carboxylic Acids on Anatase TiO2(0 0 1),” Surface Science, Vol. 506, No. 3, 2002, pp. 251-271. doi:10.1016/S0039-6028(02)01388-2
|
[20]
|
M. Z. Atashbar, H. T. Sun, B. Gong, W. Wlodarski and R. Lam, “XPS Study of Nb-Doped Oxygen Sensing TiO2 Thin Films Prepared by Sol-Gel Method,” Thin Solid Films, Vol. 326, No. 1-2, 1998, pp. 238-244.
doi:10.1016/S0040-6090(98)00534-3
|