Preparation of Porous Poly(3-Hydroxybutyrate) Films by Water-Droplet Templating


Porous resorbable implants are of great interest since they may deliver bioactives or drugs, facilitate the transport of body fluids or degradation products and provide a favorable environment for cell attachment and growth. In this work we report on a method using concentrated emulsions to template interconnected solid foam materials and to produce highly porous poly(3-hydroxybutyrate) (PHB) materials. Porous PHB films were cast made from water-in-oil template emulsions including Span 80 and lithium sulphate. The films were characterized by SEM-EDX and DMA. The water uptake of the films was recorded in order to determine the fraction water available pores. The results show that the addition of lithium sulphate allows a fine tuning of the film morphology with respect to porosity and interconnected porous structure. The film porosity was determined to 51% ± 3%, 52% ± 3% and 45% ± 3% for the films made with 0%, 2.9% and 14.3% lithium sulphate in the template emulsion, respectively. The fraction water available pores was significantly lower, 11% ±3%, 38% ±12% and 48% ± 7% for films with 0%, 2.9% and 14.3% litium sulphate respectively. Differences in fraction water available pores and total porosity for the films reflects the film morphology and differences in pore interconnection.

Share and Cite:

A. Bergstrand, H. Andersson, J. Cramby, K. Sott and A. Larsson, "Preparation of Porous Poly(3-Hydroxybutyrate) Films by Water-Droplet Templating," Journal of Biomaterials and Nanobiotechnology, Vol. 3 No. 4, 2012, pp. 431-439. doi: 10.4236/jbnb.2012.34043.

Conflicts of Interest

The authors declare no conflicts of interest.


[1] L. Lu, S. J. Peter, M. D. Lyman, H. L. Lai, S. M. Leite, J. A. Tamada, S. Uyama, J. P. Vacanti, R. Langer and A. G. Mikos, “In Vitro and in Vivo Degradation of Porous Poly(dl-lactic-co-glycolic Acid) Foams,” Biomaterials, Vol. 21, No. 18, 2000, pp. 1837-1845. doi:10.1016/S0142-9612(00)00047-8
[2] A. G. Mikos, G. Sarakinos, S. M. Leite, J. P. Vacanti and R. Langer, “Laminated Three-Dimensional Biodegradable Foams for Use in Tissue Engineering,” Biomaterials, Vol. 14, No. 5, 1993, pp. 323-330. doi:10.1016/0142-9612(93)90049-8
[3] C. Vaquette, C. Frochot, R. Rahouadj and X. Wang, “An Innovative Method to Obtain Porous Poly(L-lactic Acid) Scaffolds with Highly Spherical and Interconnected Pores,” Journal of Biomedical Materials Research, Part B, Vol. 86B, No. 1, 2008, pp. 9-17. doi:10.1002/jbm.b.30982
[4] H. Lo, M. S. Ponticiello and K. W. Leong, “Fabrication of Controlled Release Biodegradable Foams by Phase Separation,” Tissue Engineering, Vol. 1, No. 1, 1995, pp. 15-28. doi:10.1089/ten.1995.1.15
[5] A. C. R. Grayson, I. S. Choi, B. M. Tyler, P. P. Wang, H. B rem, M. J. Cima and R. Langer, “Multi-Pulse Drug Delivery from a Resorbable Polymeric Microchip Device”, Nature Materials, Vol. 2, No. 11, 2003, pp. 767-772. doi:10.1038/nmat998
[6] W. H. Ryu, M. Vyakarnam, R. S. Greco, F. B. Prinz and R. J. Fasching, “Fabrication of Multi-Layered Biodegradable Drug Delivery Device Based on Micro-Structuring of PLGA Polymers,” Biomedical Microdevices, Vol. 9, No. 6, 2007, pp. 845-853. doi:10.1007/s10544-007-9097-8
[7] E. M. Christenson, W. Soofi, J. L. Holm, N. R. Cameron and A. G. Mikos, “Biode-gradable Fumarate-Based Poly-High Internal Phase Emulsions (HIPE) as Tissue Engineering Scaffolds,” Biomacromolecules, Vol. 8, No. 12, 2007, pp. 3806-3814. doi:10.1021/bm7007235
[8] Y. Lumelsky and M. S. Silverstein, “Biodegradable Porous Polymers through Emulsion Templating,” Macromolecules, Vol. 42, No. 5, 2009, pp. 1627-1633. doi:10.1021/ma802461m
[9] R. N. Reusch, A. W. Sparrow and J. Gardiner, “Transport of Poly-β-Hydroxybutyrate in Human Plasma,” Biochimica et Biophysica Acta, Vol. 1123, No. 1, 1992, pp. 33-40.
[10] T. Saito, K. Tomita, K. Juni and K. Ooba, “In Vivo and in Vitro degradation of Poly(3-Hydroxybutyrate) in Rat”, Biomaterials, Vol. 12, No. 3, 1991, pp. 309-312. doi:10.1016/0142-9612(91)90039-D
[11] M. Aberg, C. Ljungberg, E. Edin, H. Millqvist, E. Nordh, A. Theorin, G. Terenghi and M. Wiberg, “Clinical Evaluation of a Resorbable Wrap-Around Implant as an Alternative to Nerve Repair: A Prospective, Assessor-Blinded, Randomised Clinical Study of Sensory, Motor and Functional Recovery after Peripheral Nerve Repair,” Journal of Plastic, Reconstructive and Aesthetic Surgery, Vol. 62, No. 11, 2009, pp. 1503-1509. doi:10.1016/j.bjps.2008.06.041
[12] P. N. Mohanna, R. C. Young, M. Wiberg and G. Terenghi, “A Composite Poly-Hydroxybutyrate-Glial Growth Factor Conduit for Long Nerve Gap Repairs,” Journal of Anatomy, Vol. 203, No. 6, 2003, pp. 553-565. doi:10.1046/j.1469-7580.2003.00243.x
[13] T. Freier, C. Kunze, C. Nischan, S. Kramer, K. Sternberg, M. Sass, U. T. Hopt and K.-P. Schmitz, “In Vitro and in Vivo Degradation Studies for Development of a Biodegradable Patch Based on Poly(3-Hydroxybutyrate) ,” Biomaterials, Vol. 23, No. 13, 2002, pp. 2649-2657. doi:10.1016/S0142-9612(01)00405-7
[14] Z. Cai, “Biocompatibility and Biodegradation of Novel PHB Porous Substrates with Controlled Multi-Pore Size by Emulsion Templates Method,” Journal of Materials Science: Materials in Medicine, Vol. 17, No. 12, 2006, pp. 1297-1303. doi:10.1007/s10856-006-0604-x
[15] S. Edrud, M. Petersson and M. Stading, “DMA Analysis of Biopolymer Film Swelling,” Annual Transactions of the Nordic Rheology Soceity, Vol. 11, 2003, pp. 155-156.
[16] N. R. Cameron, “High Internal Phase Emulsion Templating as a Route to Well-Defined Porous Polymers,” Polymer, Vol. 46, No. 5, 2005, pp. 1439-1449. doi:10.1016/j.polymer.2004.11.097
[17] M. Y. Koroleva and E. V. Yurtov, “Effect of Ionic Strength of Dispersed Phase on Ostwald Ripening in Water-in-Oil Emulsions,” Colloid Journal, Vol. 65, No. 1, 2003, pp. 40-43. doi:10.1023/A:1022362807131
[18] S. Ji, Q. Gu and B. Xia, “Porosity Dependence of Mechanical Properties of Solid Materials,” Journal of Materials Science, Vol. 41, No. 6, 2006, pp. 1757-1768. doi:10.1007/s10853-006-2871-9
[19] C. Pedros-Alio, J. Mas and R. Guerrero, “The Influence of Poly-β-Hydroxybutyrate Accumulation on Cell Volume and Buoyant Density in Alcaligenes Eutrophus,” From Archives of Microbiology, Vol. 143, No. 2, 1985, pp. 178-184. doi:10.1007/BF00411044

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.