Investigation of Stator Wake Variability in Single Stage Axial-Compressor
Xiaorong Xiang, Bo Liu, Liqing Qiao, Qingwei Wang
DOI: 10.4236/eng.2010.27071   PDF    HTML     5,301 Downloads   8,873 Views   Citations


In this paper, we investigate the stator wake variability along the axial direction under different rotating speeds and mass flow conditions, in the terms of wake-core position, wake depth, wake width and wake velocity gradient. Experimental study is carried out in a single stage axial compressor by using Hot-wire Anemometer (HWA). Simultaneously, the numerical calculation is brought out in the same experiment rig. Firstly, we analyze the time-averaged velocity and radial vorticity at different axial positions, and explore the wake variability along the axial direction. Then, we present the effects of operation conditions on the wake-core position, and find out the inlet Mach number and incident angle are both the key influence factors of the wake-core position. Finally, we summarize four preliminary conclusions of the wake variability.

Share and Cite:

X. Xiang, B. Liu, L. Qiao and Q. Wang, "Investigation of Stator Wake Variability in Single Stage Axial-Compressor," Engineering, Vol. 2 No. 7, 2010, pp. 550-557. doi: 10.4236/eng.2010.27071.

Conflicts of Interest

The authors declare no conflicts of interest.


[1] D. Gurak, Mehmet S. Kavsaoglu and I. S. Akmandor, “Multi Block Unsteady Navier Stokes Solution of Com-pressor Stator in Rotor Wake,” 43rd American Institute of Aeronautics and Astronautics (AIAA) aerospace sciences meeting and exhibit, Reno, Nevada, 10-13 January 2005, p. 1011.
[2] Albert J. Sanders and Fleeter Sanford, “Rotor Blade-to- Blade Wake Variability and Effect on Downstream Vane Response,” Journal of propulsion and power, 2002, Vol. 18, No.2, pp. 456-464.
[3] G. M. Mcnerney, C. P. Van Dam and D. T. Yen Nakafuji, “Blade-Wake Interaction Noise for Turbines with DownWind Rotors,” Journal of solar energy engineering, Vol. 125, No. 4, 2003, pp. 497-505.
[4] M. Roger, “Analytical Modelling of Wake-Interaction Noise in Centrifugal Compressors with Vaned Diffusers,” 10th AIAA/CEAS Aeroacoustics Conference, Manchester, 10-12 May 2004, p. 2994.
[5] A. Ferrecchia, W. N. Dawes and P. C. Dhanasekaran, “Compressor Rotor Wakes and Tone Noise Study,” 9th AIAA/CEAS Aeroacoustics Conference and Exhibit, Hilton Head, South Carolina, 12-14 May 2003, p. 3328.
[6] Shaobin Li, Fu Chen and Peigang Yan, “Numerical In-vestigation of the Effect of Stator Clocking on Blade Boundary Layer Flow in Compressor,” Acta Aeronautica Et Astronautica Sinica, Vol. 28, No. z1, 2007, pp. s62-69.
[7] J. Estevadeordal, S. Gogineni and L. Goss, “DPIV Study of Wake-rotor Synchronization in a Transonic Compres-sor,” 31st AIAA Fluid Dynamics Conference and Exhibit, Anaheim, CA, 11-14 June 2001, p. 3095.
[8] Bo Liu, Zhipeng Cao and Yuanhu Cai, “Numerical Si-mulation of Unsteady Vortex in the Wake of Cascade Flow,” Journal of Northwestern Polytechnical University, Vol. 23, No. 5, 2005, pp. 562-566.
[9] Guanghua Wang, Baojie Liu and Tao Liu, “A PIV Study of Near Wake Flow of airfoil Part I-Kinematic Characte-ristics,” Journal of Aerospace Power, Vol. 14, No. 2, 1999, pp. 119- 124.
[10] Nicole L. Key, Patrick B. Lawless and Sanford Fleeter, “Rotor Wake Variability in a Multistage Compressor,” 45th AIAA Aerospace Sciences Meeting and Exhibit, Reno, Nevada, 8-11 January 2007, p. 19.
[11] S. T. Hsu and A. M. Wo, “Near-Wake Measurement in a Rotor/Stator Axial Compressor Using Slanted Hot-Wire Technique,” Experiments in Fluids, Vol. 23, No. 5, 1997, pp. 441-444.
[12] A. Jameson, W. Schmit and E. Turkel, “Numerical Solu-tion of the Euler Equations by Finite Volume Methods Using Runge-Kutta Time-Stepping Schemes,” 14th AIAA Fluid and Plasma Dynamics Conference, Palo Alto, CA, 23-25 June 1981, p. 1259.

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.