Production and Characterization of Nano Structured Silicon Carbide by High Energy Ball Milling

J. Babu Rao, Dil Kush, NRMR Bhargava

Dept of Metallurgical Engineering, Andhra University, Visakhapatnam- 530 003, India.

DOI: 10.4236/jmmce.2012.115038                

Abstract

The article has been retracted due to the investigation of complaints received against it. The Editorial Board found that substantial portions of the text came from other published paper. Comparing with the paper published in International Journal of Engineering, Science and Technology Vol. 3, No. 4, 2011, pp. 82-88 (www.ijest-ng.com), these two papers have the same contents before Figure 7 and the author added Fig. 8, 9, 10 on the 2012 paper. The scientific community takes a very strong view on this matter, and the Journal of Minerals and Materials Characterization and Engineering (JMMCE) treats all unethical behavior seriously. This paper published in Vol.11 No.5, 529-541, 2012 has been removed from this site.

Keywords

Nano particles; Silicon carbide; High Energy Ball Milling; X-ray diffraction; SEM.

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1]	B.Bhushan., “Handbook of Nanotechnology” Springer – Verlag, New York, 2004.
[2]	M Kohlar, W Fritzsche “Nano Technology- An introduction to Nano structuring Techniques – Wiley- VCH- Verlag, Germany, 2004.
[3]	Guozhong Cao “Nanostructures and Nano materials- Synthesis, properties and Applications-Imperial College Press, USA, 2004.
[4]	Marie Isabelle Baraton – “Synthesis, functionalization and surface treatment of Nano particles” American Scientific publication, USA, 2003.
[5]	Carl C Koch, “Nano structured materials processing, properties and applications” – William Andrew Inc.-NY, USA, 2006.
[6]	K. Akio, O. Atsushi, K. Toshiro, T. Hiroyuki, J. of Jpn. Inst. Light Met, 49 (1999) 149-154.
[7]	K.M. Mussert, W.P. Vellinga, A. Bakker, S.Van Drt Zwaag, J. of Materials Science, 37 (2002) 789-794.
[8]	X.F. Chen, E.G. Baburai. F.H. Froes, A. Vassel, Proc. Adv. Part. Mater. Processes (1997) 185-192.
[9]	S. L .Utriga Filho, R. Rodriguez, J.C. Eartman, E.J. Lavernia, Mater Sci. Forum 416-418 (2003) 213-218.
[10]	J.R.Groza, Int. J. of Powder Metall. 35 (1999) 59-66.
[11]	M. Habibnejad-Korayem, R. Mahumudi, W.J. Poole, Mat. Science and Engg.-A, 519 (2009) 198-203.
[12]	A. Mazahery, H. Habdizadeh, H.R. Baharvandi, Mat. Science and Engg.-A, 518 (2009) 61-64.
[13]	A. Ansary Yar, M. Montazerian, H. Habdizadeh, H.R. Baharvandi, J. of Alloys and Com, 484 (2009) 400-404.
[14]	M. Habibnejad-Korayem, R. Mahumudi, H.M. Ghasemi, W.J. Poole, Wear, 268 (2010) 405-412.
[15]	Yong Yang, Jie Lan, Xiaochun Li, Mat. Science and Engg. - A, 380 (2004) 378-383.
[16]	Jie Lan, Yong Yang, Xiaochun Li, Mat. Science and Engg. - A, 386 (2004) 284-290.
[17]	L. Shaw, H.Luo, J.Villegas, D. Miracle, Acta Materialia, 51 (2003) 2647-2663.
[18]	K. Boylan, D.Ostrander, U.Erb, G. Palumbo, K.T.Aust, Scripta Materialia, Mater, 25 (1991) 2711-2716.
[19]	F. Zhou, J.Lee, E.J. Lavernia, Scripta Mater, 44 (2001) 2013-2017.
[20]	C.L. De Castro, B.S. Mitchell, Mat. Science and Engg. - A, 396 (2005) 124- 128.
[21]	B.D. Cullity, Elements of X-ray diffraction, 2nd edition, Addison- Wesley, California USA, 1978.
[22]	Qiaoqin Yang, Lihua Zhao, Hanning Xiao and Nanfang Zhao, Int. Centre for Diffraction Data, Advances in X-ray Analysis, 43 (2000) 151-156.
[23]	C. Suryanarayana, Mechanical alloying and milling, Progress in Materials Science, 46 (2001) 1-184.
[24]	Anil K. Bhowmick, J. Konar. , S. Kole., S. Narayanan., J. Appl. Polymer Science, 57 (1995) 631.
[25]	G.A. Slack and S.F. Bartman, J Appl. Phys. 46 (1975) 89.
[26]	S. Stelmakh, A. Swiderska-Sroda, B.Palosz, E Grzanka and C. Baehta, “Thermal expansion of SiC and Al in nanocomposites”, www.science24.com, pp.947-948.
[27]	C.S. Park., C.H. Kim., M.H. Kim., and C. Lee, Materials Chemistry and physics, 88 (1) (2004) 46-52.
[28]	W.D. Fei, L.D. Wang, Materials Chemistry and Physics, 85 (2-3), (2004) 450-457.
[29]	S.C. Tjong, K.F. Tam and S.Q. Wu., Compos. Sci Technol, 63 (2003) 89-97.
[30]	Z.R. Xu., K.K. Chawala., R. Mitra., and M.E. Fine, Scripta Met.et. Materiallia, 31 (11), (1994) 1525-1530.
[31]	C. C. Koch, Nano structured materials, 2 (1993) 109-129.