Energy Parameter Correlation of Failure Life Data between Cyclic Ball Indentation and Low Cycle Fatigue


Material properties provide important information about the fatigue life which makes life extension of critical components in various industries possible. The conventional methods of determining tensile strength and fatigue life through ASTM or equivalent standard specimen have their limitations due to size requirements of test specimen. Automated Ball Indentation (ABI) is a semi-invasive technique that is useful for determining the material properties. A tungsten carbide ball of diameter 1.57 mm is used to load the test specimen and the force vs. displacement response is used to estimate material properties. Methods have been formulated in the past to predict the fatigue life of the specimen by correlating Cyclic Indentation and Low Cycle fatigue data. In this work, investigation of the role of plastic dissipation energy in failure and its correlation for the two processes by Finite Element simulations in ABAQUS is attempted. Results such as force vs. displacement response, residual depth and plastic diameter with Haggag’s [1] formulation and experimental results are validated first. Then, the plastic dissipation energy density, which is a comparable parameter, is plotted for both Cyclic Indentation and Low Cycle Fatigue. A reasonably good correlation is obtained which also validates the failure life predicted from knee-point approach. Dependence of the pile-up profile of variables such as method of loading and the friction between the contacting bodies is also discussed.

Share and Cite:

A. Bangia and R. Prakash, "Energy Parameter Correlation of Failure Life Data between Cyclic Ball Indentation and Low Cycle Fatigue," Open Journal of Metal, Vol. 2 No. 1, 2012, pp. 31-36. doi: 10.4236/ojmetal.2012.21005.

Conflicts of Interest

The authors declare no conflicts of interest.


[1] T. S. Byun, J. H. Hong, F. M. Haggag, K. Farell and E. H. Lee, “Measurement of through the Thickness Variations of Material Properties in SA508 Gr.3 Pressure Vessel Steels Using Ball Indentation Test Technique,” International Journal of Pressure Vessels & Piping, Vol. 74, No. 3, 1997, pp. 231-238. doi:10.1016/S0308-0161(97)00114-2
[2] F. M. Haggag, T. S. Byun, J. H. Hong, P. Q. Miraglia and K. L. Murty, “Indentation-Energy-to-Fracture (IEF) Parameter for Characterization of Carbon Steels Using Non-Destructive Automated Ball Indentation (ABI) Technique,” Scriptia Materialia, Vol. 38, No. 4, 1998, pp. 645-651. doi:10.1016/S1359-6462(98)00519-3
[3] J. M. Collin, T. Parenteau, G. Mauvoisin and P. Pilvin, “Material Parameters Identification Using Experimental Continuous Spherical Indentation for Cyclic Hardening,” Computational Materials Science, Vol. 46, No. 2, 2009, pp. 333-338. doi:10.1016/j.commatsci.2009.03.016
[4] S. Mesarovic and N. A. Fleck, “Spherical Indentation of Elastic-Plastic Solids,” The Royal Society, Vol. 455, No. 1987, 1999, pp. 2707-2728. doi:10.1098/rspa.1999.0423
[5] N. W. Klingbeil, “A Total Dissipated Energy Theory of Fatigue Crack Growth in Ductile Solids,” International Journal of Fatigue, Vol. 25, No. 2, 2003, pp. 117-128. doi:10.1016/S0142-1123(02)00073-7
[6] R. V. Prakash, P. Bhokardole and C. S. Shin, “Investigation of Material Fatigue Behaviour through Cyclic Ball Indentation Testing,” Journal of ASTM International, Vol. 5, No. 9, 2008, pp. 1-15. doi:10.1520/JAI101042
[7] Standard Practice for Strain-Controlled Fatigue Testing, ASTM International, Designation E 606, West Conshohocken, Pennsylvania, PA, USA.
[8] F. Yang, L. Peng and O. Kenji, “Cyclic Indentation in Alu- minium,” Journal of Material Science, Vol. 42, No. 12, 2007, pp. 4513-4520. doi:10.1007/s10853-006-0480-2
[9] V. T. Troschenko and P. A. Fomichev, “An Energy Criterion for Fatigue Failure,” Strength of Materials, Vol. 25, No. 1, 1993, pp. 1-7. doi:10.1007/BF00767729

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.