
1. Introduction
Although the cross product of two vectors in natural space is widely used in the geometry, mechanics, computer graphics etc. [1] [2] [3] [4] [5], that is even extended to
[6] and to
-dimensional vector spaces [7] [8] [9], we still feel something imperfect, since it does not have corresponding division. When we face cross product equation
, naturally hope
holds. Almost everyone spends some time to consider the divisions of vectors when learning cross products, and unfortunately obtains the result: Generally speaking, the division of two vectors on cross products does not exist. As a result, there are no papers which successfully study the divisions of vectors on cross products.
By profoundly researching cross products of vectors, we find that we might ignore something important such as angle. For instance, some books [10] [11] use coordinates of vectors to directly define cross product as
(1)
or
(2)
where
and
, and
are an orthonormal basis. Though the two definitions above are correct and useful, there are no angles appearing on the face. It is easy to make people ignore the role of angles between vectors when computing cross products. Fortunately some books [12] [13] [14] stressed angles, like the following definition:
Let
and
be two vectors, and
be the angle between
and
. The cross product (also called vector product) of two vectors
and
is the vector, denoted by
, whose magnitude is
(3)
and whose direction is perpendicular to both
and
, having the same direction as the translation of a right-handed screw due to a rotation from
to
(See Figure 1).
This definition tells us that, when we compute
, we actually know not only
and
but also the angle between them, which actually play very important roles. However, we do not know the angle condition when we inversely want to obtain
from
and
. We find that we can inversely obtain the exact
from
and
by adding the angle condition.
When we actually pay more attention to angles, we then successfully establish the theory of indefinite cross divisions, as the inverse operations of cross products. This paper is divided into 6 sections: In Section 2, the definitions of indefinite cross divisions are introduced, and some basic properties are presented. In Section 3, the some basic operations of indefinite cross divisions are discussed. In Section 4, the geometric expressions of indefinite cross divisions are provided, and their structures with real parameters are presented. In Section 5, the coordinate formulas and corresponding examples on indefinite cross divisions are simply presented after studying the structures.
2. Indefinite Cross Divisions
In this section, we will present the definitions of indefinite cross divisions when the angles are not zero and π. And some notations and basic properties are proposed.
Definition 2.1. Let
be two vectors with
and
, and let
be an angle. The vector, denoted by
, is called the left (right) indefinite cross division of two vectors
and
, simply left (right) cross division, if its magnitude is defined as
(4)
and its direction is perpendicular to
such that
(See Figure 2).
More specifically, the direction of
is determined by the following 3 steps:
Step 1. Let O be any point in the space, and make
,
.
Step 2. Extend the left (right) hand, satisfying five fingers are on the plane BOC, and the thumb is perpendicular to the other 4 fingers, and point the thumb in the direction of
and the other four fingers in the direction of
.
Step 3. The left (right) hand rotates angle
around vector
.
Then, the direction pointed by the four fingers is that direction of
(See Figure 2).
Definition 2.2. The
in notation
is called an indefinite angle parameter, simply angle parameter. The left (right) indefinite cross division, of course, can be called the left (right) indefinite cross quotient. The left and right indefinite cross divisions are collectively called the indefinite cross divisions, simply cross divisions.
When
and
and
or π, the problem becomes very simple since
and
are parallel to
so that they can be easily dealt with the simple form of
in Section 4. In light of these considerations, without special statement, as we meet the notations
and
, we always suppose
,
and
. We do not repeat later.
From Definition 2.1,
and
have the following simple results:
(1.1)
for any
.
(1.2)
,
.
(1.3)
,
,
obey the right-handed rule, and
,
,
, of course, also.
(1.4)
.
(1.5)
and
.
Indefinite cross divisions have the following two important properties:
(1.6)
,
. (Conversion Formulas)
(1.7)
,
. (Inverse Formulas)
Of course, they have some other properties such as
(1.8)
,
.
(Angle Formulas)
(1.6), (1.7) and (1.8) can be easily understood by Figure 3. Note that, Definition 2.1 ensures, for any
,
(
) is a vector such that
(
). Conversely, we have
Theorem 2.1. If there is a vector
(
) such that
and
, then there is the unique
such that
(
).
Proof. Since
, the angle
between
and
is in
. Let
. According to the definition of left (right) indefinite cross division,
and
(
and
) have the same direction. Since
, they have the same magnitude
(
). Thus
(
). Since
specifies the direction,
is unique.
Similarly, we have
with the unique
. ¨
The above theorem implies
Corollary 2.1. If
, then
Denote
and
. We have
Theorem 2.2. Let
and
. Let
be n real numbers such that
. Then,
and
.
Proof.
, and
. ¨
After we have indefinite cross divisions, it is easy to find the general solution of the following cross product vector equation:
(5)
where
and
are given such that at least one is not zero, and
and
are two unknown vectors. Then, how to get the solution of the above equation? Assume
. Let
take an vector
, we have equation
(6)
Then we get the general solution of Equation (5) is
Similarly, when
, the general solution of Equation (5) is
How to understand indefinite cross division? Cross product is like derivation, and indefinite cross division is like indefinite integral, where angle parameter is like arbitrary constant in indefinite integral.
3. Operations
In this section, we will further discuss the rules of multiplications of scalars and cross divisions. Because a cross division involves three factors (a numerator vector and a denominator vector and an angle parameter
), the multiplications become very interesting. For the symmetry of left and right indefinite cross divisions, we only prove the properties about left cross divisions.
Theorem 3.1. For
,
,
.
Proof. When
,
is obvious.
When
, by Inverse Formulas (1.7), we have
¨
Theorem 3.2. (1) For
,
,
;
(2) for
,
,
.
Proof. (1) Obvious.
(2) For
, by Theorem 0.3 and Conversion Formulas (1.6),
. ¨
Corollary 3.1. (1) For
,
,
;
(2) for
,
,
.
Proof. Obvious by Theorem 3.1 and Theorem 3.2. ¨
Corollary 3.3. (1) For
,
,
;
(2) for
,
,
.
Proof. (1) If
, then
.
(2) If
, then
. ¨
Theorem 3.3. If two nonzero vectors
and
have the same direction, then
(1)
; (2)
.
Proof. (1)
There is a real number
satisfying
, since two nonzero vectors
and
have the same direction. Thus,
. ¨
Note that, if
and
have opposite directions, then the results do not hold when
. In fact, simply suppose that
and
have the same direction. Then
and
have the same direction which is quite different with that of
. Not to mention, for general
and
.
When
and
have opposite directions and
, the equations hold. In fact, at this time, it is enough to recognize the directions of
and
are opposite. The angle
is special and important, which even results in
Theorem 3.4.
and
.
Proof. If
, the results hold evidently. Assume that
. Since
,
and
have the same direction. Thus, there is a real number
, satisfying
. Therefore
. Similarly, we have
. ¨
4. Structure of Cross Divisions
In this section, in order to conveniently study the structures of cross divisions, we always suppose that
and
are two vectors with
and
, and
is a given angle. We firstly present the following geometric expressions of indefinite cross divisions:
Theorem 4.1. In Figure 4, let O be a point in the natural space, and take
,
,
,
. For
, through
, draw a straight line
parallel to vector
. Then
(1) point
is on the line
if and only if there exists a
such that
;
(2) point
is on the line
if and only if there exists a
such that
.
Proof. (1) In fact, when
is on the line
,
.
Thus, there exists a
such that
according to Theorem 2.1.
Conversely, if there exists a
such that
. We have
,
which implies
is on the line
.
(2) Similarly.
Corollary 4.1. The point sets
and
form two parallel lines, whose distance is
.
Proof. Obvious by Attribute (1.5) and Theorem 4.1. ¨
Corollary 4.2. For any
, there is a real number
such that
(7)
Proof. Obvious by Theorem 4.1. ¨
Especially, when
, we have
Corollary 4.3. For any
, there is a real number
such that
(8)
where
.
Proof. From Figure 4, we have
. ¨
Corollary 4.4. For any
, there is a real number
such that
(9)
Proof. Obvious. ¨
(7) and (8) show the relations between indefinite cross divisions and
with a fixed angle. They successfully put angle parameter into real parameter and can be also regard as the definitions of indefinite cross divisions. In Figure 4, we can find that, when
goes to 0 or π, the vectors
and
are all closing to the straight line OB. When
or π, we have
and
and
where
is determined by other conditions.
Thus, for
or π, we can present a supplementary definition of indefinite cross divisions to complete our theory.
Definition 4.1. Let
be a nonzero vector. For
or π,
, where
is called the real parameter.
Theorem 4.2. For
or π, if there is a real number
such that
, then
Proof. According to the above definition, there is a real number
such that
. We have,
. ¨
Combining Corollary 4.3 and Theorem 4.2 and
, we can provide two unified forms by
Corollary 4.5. For any
, there is a real number
such that
(10)
where
if
is known.
The general solution to Equation (5) can be expressed by an indefinite real number and a fixed angle such as
. When
, the general solution of Equation (5) is
When
, the general solution of Equation (5) is
Let
be a fixed angle and
,
be two arbitrary vectors with
. Denote
and
. Then
is an Abelian group with the binary mapping
:
.
5. Coordinates of Cross Divisions
In this section, we just consider the coordinate formulas of indefinite cross divisions in some rectangular coordinate system. We firstly study the case of
.
Theorem 5.1. In a rectangular coordinate system
, let
,
. Suppose
. Then
(11)
Proof. According to Theorem 3.4, we have
. ¨
Theorem 5.2. In a rectangular coordinate system
, let
,
, and
. Suppose
. Then
(12)
Proof. According to Corollary 4.3,
Then we obtain the formula (12) by using the coordinates of
and
. ¨
The formula (12), of course, can be obtained from other ways. For example, from the following three equations:
In fact, substituting
,
and
by their coordinates, by very complicated coordinate calculation, we can also derive the formula (12).
Theorem 5.3. In a rectangular coordinate system
, let
,
. For
or π, suppose
. If
, then
(13)
Proof. If
or π, from Theorem 4.2,
, we get Equation (13) by substituting
by its coordinates. ¨
Similarly, for right indefinite cross division, we have
Theorem 5.4. In a rectangular coordinate system
, let
,
. Suppose
. Then
(14)
Theorem 5.5. In a rectangular coordinate system
, let
,
, and
. Suppose
. Then
(15)
Theorem 5.6. In a rectangular coordinate system
, let
,
. For
or π, suppose
. If
, then
(16)
Now we consider how to use our theory. Though we can give some application examples of cross divisions in different fields, such as in physics, here we just give two very simple examples to show how to use our coordinate formulas and to test our theory by the way.
Example 5.1. Given two vectors
and
, then their cross product
. Furthermore we have
,
,
. Since
and
are known, the angle
between them is determined by
. By the way, we have
,
, and
.
It is no doubt that
and
and
. Thus, from Formula (12), we have the coordinates of
:
It is readily seen that
is really equal to
.
Similarly, since
and
and
, by Formula (15), we can obtain the coordinates of
.
It is also seen that
is exactly equal to
.
Example 5.2. Given two vectors
and
. Since
, their cross product
and
. Furthermore, their dot product
, and
, and
. If we regard
as known, then
.
Thus, from Formula (13), we have the coordinates of
:
;
;
.
It is readily seen that
is exactly equal to
.
Similarly, we have the coordinates of
:
;
;
.
It is also seen that
is fully equal to
.
When we want to find
from
and
such that
and
. At this time,
is known, so we can regard
as known if we need, that results in
, and
.
It is seen that, if we know the angle (≠0 or π) or dot product when the angle is 0 or π, we can inversely find the unique expected indefinite cross quotients
and
accurately. Furthermore, our formulas can tell that according to our new needs, we can quickly get other new vectors to fit our new needs from
and
by changing angle parameter
.
6. Conclusions
This paper has solved the problem that cross product has no corresponding division by introducing the indefinite cross divisions. When we know two vectors
and
such that
and
, according to our theory, we can inversely obtain two vectors
and
such that
and
where
is an angle parameter. Furthermore, we can design indefinite cross quotients by adjusting angle parameter to fit new situation in the application. If we know the coordinates of
and
, the coordinate formulas (11)-(16) can help us to get the coordinates of
and
. It is worth mentioning that Corollary 4.5 not only puts angle parameter into real parameter but also presents two unified expressions:
which avoids concerning the angle is in
or not so that let us solve some problems easily. When meeting the equations of cross products in practical applications, the indefinite cross divisions can help us obtain the solutions to the equations of cross products. Our theory of indefinite cross divisions makes cross product theory more perfect.
The relation between indefinite cross divisions and cross products likes that between indefinite integrals and derivatives.