Non-Isothermal Separation Process of Two-Phase Mixture Water/Ultra-Viscous Heavy Oil by Hydrocyclone

DOI: 10.4236/aces.2011.14038   PDF   HTML     5,483 Downloads   9,027 Views   Citations


Environmental agencies do not allow effluents, from the petroleum productions, which contain oil concentrations that exceed the amounts permitted by the regulations. In recent time heavy oil operating petroleum industries are generating oil/water mixture by products, which are difficult to separate. Industrially, hydrocyclone is generally used to separate oil from an oil/water mixture. This is due to its high performance of separation, low cost of installation and maintenance. In the present work, therefore, the thermal fluid dynamics of water/ultra-viscous heavy oil separation process in a hydrocyclone has been studied. A steady state mathematical model which simulates the performance of a non-isothermal separation process is presented. The Eulerian-Eulerian approach for the interface of the phases involved (water/ultra-viscous heavy-oil) is used and the two-phase flow is considered as incompressible, viscous and turbulent. For carrying out numerical solutions of the governing equations the CFX11® commercial code was used. Results of the behavior of the two-fluid flow inside the hydrocyclone and separation efficiency are presented and analyzed. The role of the average temperature of the fluid, oil droplet diameter and the fluid mixture inlet velocity on the separation efficiency of the hydrocyclone are verified.

Share and Cite:

J. Souza, F. Farias, R. Swarnakar, S. Neto and A. Lima, "Non-Isothermal Separation Process of Two-Phase Mixture Water/Ultra-Viscous Heavy Oil by Hydrocyclone," Advances in Chemical Engineering and Science, Vol. 1 No. 4, 2011, pp. 271-279. doi: 10.4236/aces.2011.14038.

Conflicts of Interest

The authors declare no conflicts of interest.


[1] L. Svarovsky, “Solid-Liquid Separation, Chemical Engineering Series,” 4th Edition, Butterworths, London, 2000.
[2] B. Wang and A. B. Yu, “Numerical Study of Particle-Fluid Flow in Hydrocyclones with Different Body Dimensions,” Minerals Engineering, Vol. 19, No. 10, 2006, pp. 1022-1033. doi:10.1016/j.mineng.2006.03.016
[3] T. Husveg, O. Rambeau, T. Drengstig and T. Bilstad, “Performance of Deoling Hydrocyclone during Variables Flow Rates,” Minerals Engineering, Vol. 20, No. 4, 2007, pp. 368-379. doi:10.1016/j.mineng.2006.12.002
[4] L. G. M. Vieira, J. J. R. Damasceno and M. A. S. Barrozo, “Improvement of Hydrocyclone Separation Performance by Incorporating a Conical Filtering Wall,” Chemical Engineering and Process, Vol. 49, No. 5, 2010, pp. 460- 467. doi:10.1016/j.cep.2010.03.011
[5] K. A. Hashmi, H. A. Hamza and J. C. Wilson, “CAN- MET Hydrocyclone: An Emerging Alternative for the Treatment of Oily Waste Streams,” Minerals Engineering, Vol. 17, No. 5, 2004, pp. 643-649. doi:10.1016/j.mineng.2004.01.019
[6] V. Krishna, R. Sripriya, V. Kumar, S. Chakraborty and B. C. Meikap, “Identification and Prediction of Air Core Diameter in a Hydrocyclone by a Novel Online Sensor based on Digital Signal Processing Technique,” Chemical Engineering and Process, Vol. 49, No. 2, 2010, pp. 165-176. doi:10.1016/j.cep.2010.01.003
[7] M. J. Doby, A. F. Nowakowski, I. Yiu and T. Dyakowski, “Understanding Air Core Formation in Hydrocyclones by Studying Pressure Distribution as a Function of Viscosity,” Journal of Mineral Processing, Vol. 86, No. 1-4, 2008, pp. 18-25. doi:10.1016/j.minpro.2007.09.002
[8] P. Bamrungsri, C. Puprasert, C. Guigui, P. Marteil, P. Bréant and G. Hérbrad, “Development of a Simple Experimental Method for the Determination of the Liquid Field Velocity in Conical and Cylindrical Hydrocyclones,” Minerals Engineering Research and Design, Vol. 86, No. 11, 2008, pp. 1263-1270.
[9] J. S. Souza, “Numerical Study of Thermo Fluid Dynamic Separation of Heavy Oils Oily Waters of a Stream by Hydrocyclone,” Master’s Thesis, Federal University of Campina Grande, Brazil, 2009.
[10] B. Wang, D. L. Xu, G. X. Xiao, W. E. K. Chu and A. B. Yu, “Numerical Study of Gas-Solid Flow in a Cyclone Separator,” Third International Conference on CFD in the Mineral and Process Industrial, Melbourne, 10-12 December 2003, pp. 371-376.
[11] M. Narasimha, M. Brennan and P. N. Holthman, “A Review of CFD Modeling for Performance Predictions of Hydrocyclone,” Engineering Applications of Computational Fluid Mechanics, Vol. 1, No. 2, 2007, pp. 109-125.
[12] H. F. Meier and M. Mori, “Gas-Solid Flow in Cyclones: The Eulerian-Eulerian Approach,” Computers Chemical Engineering, Vol. 22, Suppl. 1, 1998, pp. S641-S644. doi:10.1016/S0098-1354(98)00114-8
[13] ANSYS CFX, “User Manual Theory,” USA, 2006.
[14] T. Babadagli and A. Al-Bemani, “Investigations on Matrix Recovery during Steam Injection into Heavy-Oil Containing Carbonate Rocks,” Journal Petroleum Science and Engineering, Vol. 58, No. 1-2, 2007, pp. 259- 274. doi:10.1016/j.petrol.2007.01.003
[15] R. B. Xiang and K. W. Lee, “Numerical Study of Flow Field in Cyclones of Different Height,” Chemical Engineering and Process, Vol. 44, No. 8, 2005, pp. 877-883. doi:10.1016/j.cep.2004.09.006
[16] H. Yoshida, T. Takashina, K. Fukuia and T. Iwanaga, “Effect of Inlet Shape and Slurry Temperature on the Classification Performance of Hydrocyclones,” Powder Technology, Vol. 140, No. 1-2, 2004, pp. 1-9. doi:10.1016/j.powtec.2003.12.006
[17] J. J. Cilliers, L. Diaz-Anadon and F. S. Wee, “Temperature, Classification and Dewatering in 10 mm Hydrocyclones,” Minerals Engineering, Vol. 17, No. 5, 2004, pp. 591-597. doi:10.1016/j.mineng.2003.11.022
[18] M. A. Bennett and R. A. Williams, “Monitoring the Operation of an Oil/Water Separator Using Impedance Tomography,” Minerals Engineering, Vol. 17, No. 5, 2004, pp. 605-614. doi:10.1016/j.mineng.2004.01.021

comments powered by Disqus

Copyright © 2020 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.