Surface Wave Echo in a Semi-Bounded Plasma ()

Hee J. Lee^{}, Myoung-Jae Lee^{}

Department of Physics, Hanyang University, Seoul, Korea.

**DOI: **10.4236/jmp.2016.712127
PDF HTML XML
1,881
Downloads
2,474
Views
Citations

Department of Physics, Hanyang University, Seoul, Korea.

Plasma echo theory is revisited to apply it to a semi-bounded plasma. Spatial echoes associated with plasma surface wave propagating in a semi-bounded plasma are investigated by calculating the second order electric field produced by external charges and satisfying the boundary conditions at the interface. The boundary conditions are two-fold: the specular reflection condition and the electric boundary condition. The echo spots are determined in terms of the perpendicular coordinate to the interface and the parallel coordinate along which the wave propagates. This improves the earlier works in which only the perpendicular coordinate is determined. In contrast with the echo in an infinite medium, echoes in a bounded plasma can occur at various spots. The diversity of echo occurrence spots is due to the discontinuity of the electric field at the interface that satisfies the specular reflection boundary condition. Physically, the diversity appears to be owing to the reflections of the waves from the interface.

Keywords

Share and Cite:

Lee, H. and Lee, M. (2016) Surface Wave Echo in a Semi-Bounded Plasma. *Journal of Modern Physics*, **7**, 1400-1412. doi: 10.4236/jmp.2016.712127.

Received 8 June 2016; accepted 5 August 2016; published 8 August 2016

1. Introduction

Plasma echoes in an infinite plasma have long been known theoretically [1] [2] as well as experimentally [3] . Spatial echoes were theoretically investigated in a static situation where the non-propagating electric field is directed perpendicular to the interface of a semi-bounded plasma [4] [5] . If the perpendicular direction is designated as the x direction, the electric field E as well as the distribution function f is spatially one- dimensional: and, where () is the plasma (vacuum) region. In this case, the corresponding Vlasov equation takes the form of a first order differential equation, and can be solved by satisfying the specular reflection boundary condition at the interface: [6] . This differential equation approach with the specular reflection boundary condition for a semi-bounded plasma has been shown to be entirely equivalent with the Fourier transform (with respect to x) under the recipe that the is extended into the region in an odd function manner, [5] . This odd function extension of gives rise to a surface term in the Fourier transform of the Poisson equation, which plays a significant role in the determination of the echo spots. It appears that this surface term, which the earlier authors entirely neglected, gives rise to diversity of echo spots [5] . Physically, the surface term manifests the reflection of the electric field at the boundary.

The echo phenomena is the result of a quadratic interaction of the two primary waves launched by two external charges at different locations (spatial echoes) or different times (temporal echoes). In response to the external charges, the plasma distribution function is modulated with the exponential phase, which is derived from the singularity at of the linear response function. This term is called the free streaming term since is the characteristic line of the Vlasov equation for a free particle. This rapidly modulating exponential phase makes the more and more oscillatory as t or x increases, and con- sequently, will become vanishingly small due to almost complete phase mixing. Therefore, in the first order, the phase mixing obliterates any appreciable effect on the macroscopic variable such as density pertur- bation. However, the second order distribution function which is a product of two first order distribution functions is not phase-mixed when or where the condition for a constructive interference is met, thereby the second order electric field does not vanish, resulting in an echo. It is evident from the expression for the product of two free-streaming exponentials that a constructive interference can result in at a certain time (temporal echo) or a certain spot (spatial echo) such that.

In this work, we investigate spatial echoes in a semi-bounded plasma, taking a full account of the boundary terms which originate from the oddly continuation of the electric field. This work is an extension of the earlier paper by Lee and Lee [5] ; the distribution function and the electric field are now spatially two-dimensional, allowing for the z-dependance. Therefore, the echoes are associated with the surface wave which is propagating in the z-direction. The second order electric field endowed with the additional z-dependance can be Fourier- inverted by contour integration with unstraightforward analytic exercise, and delineating the echo condition requires extra complexity. The important boundary term is the discontinuity of the perpendicular electric field at the interface that is necessary to have the specular reflection boundary condition satisfied [5] . The diversity of echo occurrence spots has been experimentally reported [7] and can be explained by this boundary term. The identification of the echo spot associated with surface wave appears to be useful in experimental point of view [7] .

2. Formulation of the Problem

We consider a plasma consisting of electrons and stationary ions, the latter forming the uniform background. The plasma is assumed to occupy the half-space. The region is assumed to be a vacuum. The perturbed electron distribution function and the electric field will depend on x and z- coordinates with the y coordinate ignored since y direction has a translational invariance. We have the nonlinear Vlasov equation and the Poisson equation to describe the electrostatic perturbation:

(1)

with

(2)

where f is a two-dimensional distribution function, and represents the external charges:

(3)

is introduced to make the argument of the d-function dimensionless, and means the replica of the preceding term with the subscript 1 replaced by subscript 2. We solve the simultaneous Equations (1) and (2) for a given as prescribed by Equation (3). In mathematical terms, we have an inhomogeneous system, driven by the source term in Equation (3). The responses f and E should be determined by.

The kinetic equation is supplemented by the kinematic boundary condition which we assume to be the specular reflection condition

(4)

This specular reflection boundary condition is automatically satisfied by extending the electric field com- ponent in odd function manner into the region, i.e.,. Assuming that the external perturbation is small, we solve Equations (1) and (2) by successive approximation. First, the linear solution of Equation (1) will be obtained for f with the boundary condition (4). Substituting this solution in Equation (2) yields an integral equation for the electric field which is solved by Fourier transform. Then the linear solution will be used to obtain the higher order solutions. We work only up to the second order. The higher order distribution function should also satisfy the boundary condition (4). The electric field should satisfy the electric boundary conditions: the normal component of the electric displacement and the tangential electric field are continuous across the interface. In this work, the Fourier transform is defined by

Let us Fourier transform Equations (1)-(3) with respect to t and z to write

(5)

(6)

where

is derived from the discontinuity of at. This N-term is characteristic of a semi-bounded plasma and responsible for the diversity of surface wave echoes, as compared with an infinite plasma. The external charges are Fourier transformed to

(7)

Equations (5) and (6) constitute a set of nonlinear simultaneous equations. We solve the set of equations by successive approximations in terms of perturbation series:

Breaking down Equations (5) and (6) order by order, we have

(8)

(9)

(10)

(11)

The quantity in Equation (9) should be determined in terms of the vacuum field from the electric field boundary condition: electric displacement is continuous across the interface,

(12)

where equals to the vacuum electric field.

3. Linear Solution

Equations (8) and (9), and give

(13)

(14)

is the dielectric function (is the plasma frequency). N is determined from the electric boundary condition as shown in the following. We need the normal component of electric displacement, to enforce the

boundary condition (12). By definition, where J is the current: . We calculate

where we used Equation (8). The above quantity equals to. Thus we have. This statement

can be most easily proved by assuming a Maxwellian. Use and to write

for the last term

Put. Then, (−1)-term vanishes upon integration, and we have

Using the above result, we obtain

(15)

To invert Equation (15), we write

(16)

In the above integral, we take the limit. Evaluating the integral by residue theorem gives

Note that we set up the contour encircling the upper half plane since. When (), the relevant pole located in the upper k_{x}-plane is (). In either case, the integral is found to be. Then, Equation (16) takes the form

(17)

where (18)

where + (−) sign corresponds to (). The above equality can be easily proven by using the

contour winding the lower half plane. Taking the limit gives the useful identity,

independently of. Clearly, this integral manifests the nature of a step function. By equating the quantity on the right hand side of Equation (17) to the x-component of the vacuum electric field (), we obtain

(19)

Using the above equation in Equation (13) gives

(20)

For an infinite plasma without boundary, we have in Equation (13), and the plasma electric field is given by

Note that in Equation (20), the -term and -term are the boundary terms which are non-existent in an infinite plasma.

In the static situation where the electric field is nonpropagating, we put in Equation (20), and the electric field reduces to Equation (23) in Lee and Lee [5] :

4. Second Order Solution and Echo Occurrence

Next, we deal with the second order equations, Equations (10) and (11). Using Equation (10) in Equation (11) yields, owing to the electrostatic nature of,

(21)

where stands for

(22)

Substituting the first order solutions [Equations (8) and (20)], into the above equations, we can write in the form,

(23)

(24)

(25)

where I stands for the exponential function as given by Equation (18). Since we don’t know yet which sign should be chosen, we keep on using the symbol I. Equation (23) is to be used for investigation of echo occurrence. The various cross terms in the product (AB) are the candidates of echo resonances to see if the condition for vanishing phase can be met.

We choose to investigate a cross term which is 1-term in A multiplied by 2-term in B. With this term, the t-inversion of Equation (23) can be easily carried out by simply putting and:

(26)

where

(27)

In the above equation, we can assume that the poles associated with the dielectric functions contribute negligibly in the - or -integral. [The dominant contribution comes from the free-streaming poles.] Also we assume to be a Maxwellian. Then we have

where 1 can be assumed to contribute nothing to the inversion integral in the following, due to phase mixing. Thus, Equation (26) can be further simplified as

(28)

Let us write explicitly the inversion integral of Equation (28) with respect to k:

(29)

This equation will be examined in view of the possibility of the vanishing phase.

(1) First, we shall consider the interference of two exponential terms in Equation (29):

The important singularities are: the double pole at and the simple poles associated respectively with and and. We shall consider only these four poles. Singularities at are not important. Therefore we can put

and all the e’s can be taken out of the integral. The residue at the double pole is obtained by taking

and substituting for. Here it is sufficient to differentiate

only the exponential functions because they yield asymptotically dominant result. [Or integrate by parts with respect to.] Thus let us calculate

(30)

Then is obtained by, suppressing the unessential factor.

Integral can be easily done by picking up the pole at

(31)

For definiteness we assume. Then the contour in -plane should encircle the upper half -plane, and in order for the pole to lie in the upper -plane, the imaginary part of should be negative. Now is only a function of per Equation (31), and we can write the second part of Equation (30) as

(32)

where

(33)

(34)

and is a step function; for and for.

The contour in -integral depends on the sign of: when (), the contour must wind the

upper (lower) -plane. The location of the poles depends upon the sign of. Sorting out the relevant cases, we carry out the integral for:

(35)

(36)

Next, taking on the first part of the integral in Equation (30), we have two cases:

1)

In this case, the contour must encircle the lower half plane and the -integral does not vanish under the provision. Then, the integral can be written as

(37)

where

(38)

(39)

Analogously to the foregoing calculation in, the above integral depends on the sign of:

(40)

(41)

2)

Repeating a similar analysis, we obtain

(42)

(43)

where

(44)

Now, we have to multiply and. In doing it, note that and. Nonzero results surviving the velocity integral are obtained in the following four cases:

a), ,; b), ,; c), ,; d), ,

Let us first consider case a). Using Equations (35) and (41), we obtain

(45)

where

(46)

Using Equations (34), (39), and (46), we can obtain the exponential phases:

(47)

(48)

with

(49)

(50)

Thus Equation (45) can be written in the form

(51)

Therefore the velocity integrals in Equation (29) survive the phase mixing when, that is,

(52)

or (53)

where an echo is given rise to. The electric field can be obtained by velocity integral in the form (see Equation (29))

(54)

where denotes the obvious integrand.

Next, let us calculate case (b). Using Equations (36) and (40) gives

(55)

This equation is identical with Equation (45) if and are interchanged in the latter. Thus, this case can give rise to an echo at the same spot as predicted by Equation (53). The corresponding electric field is obtained by a similar velocity integral to Equation (54) but over different range of.

The cases (a) and (b) predict the same echo spot because they yield the same imaginary phase. One more task: the various inequality conditions set forth to specify the contour in the contour integrations need to be checked against the echo coordinate found in Equation (54). Let us consider the inequalities and postulated in the case (a). Using Equation (52), the inequality can be written in the form

which is the condition. Therefore the conditions and imply each other. Also we can ascertain that the echo x-coordinate is in accord with the condition. So in cases (a) and (b), the premise and the result are consistent. For the cases of (c) and (d), we state without repeating a similar algebra that the imaginary part of the phase is still obtained by Equation (50) [the real part of the phase is different]. Although the echo spot is predicted by the same equation as Equation (53), these cases of (c) and (d) are not acceptable because the conditions and or and are contradictory to each other. We have the conclusion: an echo occurs where and the echo coordinates are predicted by Equation (53).

(2) Next, we consider the product of two boundary terms, in Equation (29):

(56)

where C is a nonessential constant factor. For definiteness, we assume. -integral and -

integral can be done easily by picking up the relevant poles, and we can write

(57)

where

(58)

(59)

The contour of -integral should encircle the upper -plane. Since the relevant singularity should be located in the upper -plane, the residue is calculated from for and for.

are defined in Equation (33). Then the last integral () in Equation (57) can be carried out in the form

(60)

where

(see Equation (18)) (61)

To carry out in Equation (59), let us assume that.

Now we are ready to evaluate -integral in Equation (59):

(62)

Using Equation (60) in Equation (62) yields

(63)

where we have. Therefore, we obtain

(64)

(65)

The above two equations and Equation (61) yield

(66)

(67)

Now we are ready to carry out the velocity integral in Equation (59) by substituting Equation (63) into it. Because of the step functions and, the velocity integral consists of four parts corresponding to. Since we are interested in the echo spots, we pay attention only to the exponential phases:

(68)

Straightly we can identify:

(69)

(70)

(71)

(72)

From above, the imaginary phases are obtained as

(73)

is obtained from by replacing and. Putting, we obtain the echo spots as

(74)

(75)

In Equation (75), corresponding to upper signs and corresponding to lower signs are mutually exclusive because if one of them is inside the plasma the other is necessarily is outside the plasma. We add that

the condition amounts to, which poses no problem in as much as we have ample

liberty in choosing the sign of.

5. Discussion

In Section 3, the plasma electric field was determined in terms of the vacuum electric field. Judicious application of the boundary conditions at the interface enables one to determine the plasma electric field entirely in terms of the external charges without introducing the vacuum electric field. Inverting Equation (13), we can write

(76)

(77)

where (78)

Next, we turn to the vacuum solution.

(79)

where is the vacuum electric field, the quantity designated by the same symbol in Equation (19).

(80)

Continuity of across the interface gives that Equation (22) equals to. Also continuity of across yields that Equation (20) equals to. Eliminating between these two equations gives N in the form

(81)

Substituting the above equation into Equation (13) yields

(82)

Equation (82) should be compared with Equation (20). Eliminating the vacuum field introduces the

denominator in Equation (82). In fact, the relation

(83)

is the electrostatic dispersion relation of the surface wave in a semi-bounded plasma [10] .

In the investigation of echo occurrence, in Equation (20) can be discarded because echoes are given rise to by interference of influences of the external charges. This amounts to saying that the denominator

doesn’t play any role in the determination of echo locations.

Equations (53) and (74) and (75) are the main results of this work in locating the echo spots associated with the surface wave in a semi-bounded plasma launched by the oscillating external charges at and. In the static situation, the z-coordinate is irrelevant. The echo spot given by Equation (53) corresponds to in Equation (45) in Lee and Lee [5] . The echo spot given by Equations (74) and (75) is surface wave-proper. Our search for the echo spots are not exhaustive; we put aside many other product terms in (AB) in Equations (24) and (25). It appears that we have diversity of echoes in a bounded plasma, which was also experimentally reported [7] . The diversity seems to be due to reflections of the wave at the interface.

Acknowledgements

Hee J. Lee thanks Professor L. Stenflo for correspondence. The work of MJL is supported by the National R&D Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Science, ICT & Future Planning (Grant No. 2015M1A7A1A01002786). This support is greatly appreciated.

Conflicts of Interest

The authors declare no conflicts of interest.

[1] |
Gould, R.W., O’Neil, T.M. and Malmberg, J.H. (1967) Physical Review Letters, 19, 219-222. http://dx.doi.org/10.1103/physrevlett.19.219 |

[2] |
Krall, N.A. and Trivelpiece, A.W. (1974) Principles of Plasma Physics. McGraw-Hill, New York, p. 547. http://dx.doi.org/10.1109/tps.1974.4316834 |

[3] |
Malmberg, J.H., Wharton, C.B., Gould, R.W. and O’Neil, T.M. (1968) Physical Review Letters, 20, 95-98. http://dx.doi.org/10.1103/physrevlett.20.95 |

[4] |
Sitenko, A.G., Pavlenko, V.N. and Zasenko, V.I. (1975) Physics Letters A, 53, 259-260. http://dx.doi.org/10.1016/0375-9601(75)90431-4 |

[5] |
Lee, H.J. and Lee, M.-J. (2015) The Open Plasma Physics Journal, 8, 1-7. http://dx.doi.org/10.2174/1876534301508010001 |

[6] | Landau, L. (1946) Journal of Physics, 10, 25-34. |

[7] | Shivarova, A. and Zhelyazkov, I. (1982) Surface Waves in Gas-Discharge Plasmas. In: Boardman, A.D., Ed., Electromagnetic Surface Modes, Wiley, New York, p. 516. |

[8] | Vukovic, S. (1986) Surface Waves in Plasmas and Solids. World Scientific, Hong Kong. |

[9] |
Gradov, O.M. and Stenflo, L. (1983) Physics Reports, 94, 111-137. http://dx.doi.org/10.1016/0370-1573(83)90004-2 |

[10] |
Lee, H.J. and Lim, Y.K. (2007) Journal of the Korean Physical Society, 50, 1056-1061. http://dx.doi.org/10.3938/jkps.50.1056 |

[11] |
Stenflo, L. and Yu, M.Y. (2002) Physics of Plasmas, 9, 5129-5130. http://dx.doi.org/10.1063/1.1521715 |

Journals Menu

Contact us

customer@scirp.org | |

+86 18163351462(WhatsApp) | |

1655362766 | |

Paper Publishing WeChat |

Copyright © 2023 by authors and Scientific Research Publishing Inc.

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.