Analysis of the Harmonic Response of a Modulation Permanent Magnetic Transmission Equipment Based on ANSYS

Zhiping Zeng; Jun Li; Shiyi Zhang; Yintao Hong; Yaohong Wang

doi:10.4236/epe.2015.73006

Home > Journals > Engineering > EPE

Energy and Power Engineering > Vol.7 No.3, March 2015

Analysis of the Harmonic Response of a Modulation Permanent Magnetic Transmission Equipment Based on ANSYS ()

Zhiping Zeng¹, Jun Li¹, Shiyi Zhang², Yintao Hong¹, Yaohong Wang¹

¹School of Mechatronics & Automotive Engineering, Chongqing Jiaotong University, Chongqing, China.
²School of Marine Navigation, Chongqing Jiaotong University, Chongqing, China.

DOI: 10.4236/epe.2015.73006 PDF HTML XML 2,661 Downloads 3,347 Views Citations

Abstract

This paper analyzes the structure and transmission principles of a modulation permanent magnet gear transmission. Its 3D data model is built based on the known optimized parameters from research team. Its structure of the harmonic response is analyzed and discussed under the software ANSYS. The displacement response and the initial 6 order response frequency and phase angle are obtained. The change rule of these responses is known under the forced vibration.

Keywords

Magnetic Field Modulation, Permanent Magnetic Transmission, ANSYS, Harmonic Response Analysis

Share and Cite:

Zeng, Z. , Li, J. , Zhang, S. , Hong, Y. and Wang, Y. (2015) Analysis of the Harmonic Response of a Modulation Permanent Magnetic Transmission Equipment Based on ANSYS. Energy and Power Engineering, 7, 63-70. doi: 10.4236/epe.2015.73006.

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1]	Wang, H.-S., Hou, Y.-P. and Cheng, S.-K. (2008) Development and Prospect of Non-Contact Permanent Magnetic Gear Transmission. MEMS, 02, 71-73.
[2]	Zhang, J.-T. and Xia, D. (2005) Research on the Transmission Characteristic of a Magnetic Gear. Machinery Design & Manufacture, 05, 69-70.
[3]	Yang, C.J. and Gu, H.W. (2008) Current Situation of the Permanent Magnetic Drive Technology and Its Prospect. Journal of Mechanical Transmission, 32, 1-5.
[4]	Liu, X.H. (2008) Design and Research on a Novel Field Modulated Magnetic Gear. Shanghai University, Shanghai.
[5]	Nagrial, M.H., Rizk, J. and Hellany, A. (2007) Design and Development of Magnetic Torque Couplers and Magnetic Gears. International Conference on Electrical Engineering, 11-12 April 2007, 1-5.
[6]	Wang, J.L. and Liu, Q.F. (2010) The Principle and Application of Magnetic Gear Transmission. Journal of Mechanical Transmission, 05, 29-32.
[7]	Mezani, S., Atallah, K. and Howe, D. (2006) A High-Performance Axial-Field Magnetic Gear. Journal of Applied Physics, 99, 08R303-08R303-3. http://dx.doi.org/10.1063/1.2158966
[8]	Madawala, U.K. and Boys, J.T. (2005) Magnetic Field Analysis of an Ironless Brushless DC Machine. IEEE Transactions on Magnetics, 41, 2384-2390.
[9]	Rasmussen, P.O., Andersen, T.O., Jorgensen, F.T. and Nidsen, O. (2005) Development of a High Performance Magnetic Gear. IEEE Transactions on Industry Applications, 41, 764-770.
[10]	Bao, G.Q., Liu, X.H. and Mao, K.F. (2011) Charcteristics of Field Modulated Magnetic Gear in Wind Turbine System. Journal of Agricultural Machinery, 42, 116-120.
[11]	Chen, Y.X. and Chen, L. (2012) Proficient in ANSYS Workbench Engineering Application Case. Publishing House of Electronics Industry, Beijing.
[12]	Ning, W.F. (2012) Design Research on the Magnetic Field Modulated Concentric Gear. Lanzhou University of Technology, Lanzhou.
[13]	Liu, J.C., Cao, J.Y. and Liu, Y. (2012) Analysis on the Transmission Characteristics of Permanent Magnetic Gears. Journal of Mechanical Transmission, 36, 9-13.
[14]	Ge, Y.J., Xin, Q. and Nie, C.Y. (2012) Research on the Relationship of the Field Modulated Permanent Magnetic Gear Structural Parameters and Its Torque. Journal of Mechanical Transmission, 36, 5-8.