Share This Article:

A Study of Porosity Effect on Tribological Behavior of Cast Al A380M and Sintered Al 6061 Alloys

Abstract Full-Text HTML XML Download Download as PDF (Size:6679KB) PP. 1-16
DOI: 10.4236/jsemat.2015.51001    4,888 Downloads   5,810 Views   Citations

ABSTRACT

Due to their light weight, high corrosion resistance and good heat conductivity, aluminium alloys are used in many industries today. They are suitable for manufacturing many automotive components such as clutch housings. These alloys can be fabricated by powder metallurgy and casting methods, in which porosity is a common feature. The presence of pores is responsible for reducing their strength, ductility and wear resistance. The present study aims to establish an understanding of the tribological behavior of high pressure die cast Al A380M and powder metallurgy synthesized Al 6061. In this study, dry sliding wear behavior of Al A380M and Al 6061 alloys was investigated under low loads (1.5 N – 5 N) against AISI 52100 bearing steel ball using a reciprocating ball-on-flat configuration and frequency of 10 Hz. Wear mechanisms were studied through microscopic examination of the wear tracks. This study revealed that due to combined effect of real area of contact and subsurface cracking, wear rate increased with increasing porosity content. The difference in friction and wear behavior between received Al A380M and Al 6061 is attributed to their hardness differences.

Conflicts of Interest

The authors declare no conflicts of interest.

Cite this paper

Sinha, A. and Farhat, Z. (2015) A Study of Porosity Effect on Tribological Behavior of Cast Al A380M and Sintered Al 6061 Alloys. Journal of Surface Engineered Materials and Advanced Technology, 5, 1-16. doi: 10.4236/jsemat.2015.51001.

References

[1] Anand, S., Srivatsan, T.S., Wu, Y. and Lavernia, E.J. (1997) Processing, Microstructure and Fracture Behaviour of a Spray Atomized and Deposited Aluminum-Silicon Alloy. Journal of Materials Science, 32, 2835-2848.
http://dx.doi.org/10.1023/A:1018668332318
[2] Zhou, J., Duszczyk, J. and Korevaar, B.M. (1991) As-Spray-Deposited Structure of an Al-20Si-5Fe Osprey Perform and Its Development during Subsequent Processing. Journal of Materials Science, 26, 5275-5291.
http://dx.doi.org/10.1007/BF01143222
[3] Prasad, B.K., Venkateswarlu, K., Modi, O.P., Jha, A.K., Das, S., Dasgupta, R. and Yegneswaran, A.H. (1998) Sliding Wear Behavior of Some Al-Si Alloys: Role of Shape and Size of Si Particles and Test Conditions. Metallurgical and Materials Transactions, 29A, 2747-2752. http://dx.doi.org/10.1007/s11661-998-0315-7
[4] Shivanath, R., Sengupta, P.K. and Eyre, T.S. (1977) Wear of Aluminium-Silicon Alloys. The British Foundrymen, 70, 349-356.
[5] Yassen, R.S. and Dwarakadasa, E.S. (1983) Wear of Aluminium under Dry Sliding Conditions. Wear, 84, 375-379.
http://dx.doi.org/10.1016/0043-1648(83)90277-6
[6] Min, K.H., Kang, S.P., Kim, D.G. and Kim, Y.D. (2005) Sintering Characteristic of AlO3-Reinforced 2xxx Series Al Composite Powders. Journal of Alloys Compounds, 400, 150-153. http://dx.doi.org/10.1016/j.jallcom.2005.03.070
[7] ASM and Klar, E. (1984) ASM Metal Handbook Vol. 7: Powder Metallurgy. 9th Edition, ASM International, Almere.
[8] Zhen, L. and Kang, S.B. (1997) Deformation and Fracture Behavior of Two Al-Mg-Si Alloys. Metallurgical and Materials Transactions, 28A, 1489-1497. http://dx.doi.org/10.1007/s11661-997-0211-6
[9] Clegg, A.J. and Das, A.A. (1997) The Influence of Structural Modifiers on the Refinement of the Primary Silicon in a Hypereutectic Aluminium Silicon Alloy. The British Foundryman, 70, 56-63.
[10] Molins, R., Bartout, J.D. and Beivenu, Y. (1991) Microstructural and Analytical Characterization of Al2O3 Composite Interfaces. Materials Science and Engineering A, 135, 111-117. http://dx.doi.org/10.1016/0921-5093(91)90546-Y
[11] Nussbaum, E.D. (1997) Semi-Solid Forming of Aluminium and Magnesium. Light Metal Age, 57, 54-58.
[12] Aylor, D.M. and Moren, P.J. (1985) Corrosion Behavior of Cast Aluminium Matrix Composites in Chloride Media. Journal of the Electrochemical Society, 132, 277.
[13] Zeuner, T., Stojanov, P., Sahm, P.R., Ruppert, H. and Engels, A. (1998) Developing Trends in Disc Brake Technology for Rail Application. Materials Science and Technology, 14, 857-863. http://dx.doi.org/10.1179/mst.1998.14.9-10.857
[14] Proudhon, H., Savkova, J., Basseville, S., Guipont, V., Jeandin, M. and Cailletaud, G. (2014) Experimental and Numerical Wear Studies of Porous Reactive Plasma Sprayed Ti-6Al-4V/TiN Composite Coating. Wear, 311, 159-166.
http://dx.doi.org/10.1016/j.wear.2014.01.012
[15] Zhang, L., Qu, X.H., Duan, B.H., He, X.B. and Qin, M.L. (2008) Effect of Porosity on Wear Resistance of SiCp/Cu Composites Prepared by Pressureless Infiltration. Transactions of Nonferrous Metals Society of China, 18, 1076-1082.
http://dx.doi.org/10.1016/S1003-6326(08)60184-3
[16] Chen, Q., Li, D. and Cook, B. (2009) Is Porosity Always Detrimental to the Wear Resistance of Materials?—A Computational Study on the Effect of Porosity on Erosive Wear of TiC/Cu Composites. Wear, 267, 1153-1159.
http://dx.doi.org/10.1016/j.wear.2008.12.058
[17] Simchi, A. and Danninger, H. (2004) Effects of Porosity on Delamination Wear Behaviour of Sintered Plain Iron. Powder Metallurgy, 47, 73-80. http://dx.doi.org/10.1179/003258904225015545
[18] Dubrujeaud, B., Vardavoulias, M. and Jeandin, M. (1994) The Role of Porosity in the Dry Sliding Wear of a Sintered Ferrous Alloy. Wear, 174, 155-161. http://dx.doi.org/10.1016/0043-1648(94)90097-3
[19] Li, D.Y. and Luo, Y.C. (2001) Effects of TiN Nano-Particleson Porosity and Wear Behaviour of TiC/TiNi Tribo Composite. Journal of Materials Science Letters, 20, 2249-2252.
[20] Hamid, A.A., Ghosh, P., Jain, S. and Ray, S. (2006) Influence of Particle Content and Porosity on the Wear Behaviour of Cast in Situ Al(Mn)-Al2O3(MnO2) Composite. Wear, 260, 368-378. http://dx.doi.org/10.1016/j.wear.2005.02.120
[21] Sarikaya, O. (2005) Effect of Some Parameters on Microstructure and Hardness of Alumina Coatings Prepared by the Air Plasma Spraying Process. Surface and Coatings Technology, 190, 388-393.
http://dx.doi.org/10.1016/j.surfcoat.2004.02.007
[22] Raghukiran, N. and Kumar, R. (2013) Processing and Dry Sliding Wear Performance of Spray Deposited Hyper- Eutectic Aluminum-Silicon Alloys. Journal of Materials Processing Technology, 213, 401-410.
http://dx.doi.org/10.1016/j.jmatprotec.2012.10.007
[23] Kanchanomaia, C., Saengwichian, B. and Manonukul, A. (2013) Delamination Wear of Metal Injection Moulded 316L Stainless Steel. Wear, 267, 1665-1672. http://dx.doi.org/10.1016/j.wear.2009.06.019
[24] Tekmen, C., Ozdemir, I., Cocen, U. and Onel, K. (2003) The Mechanical Response of Al-Si-Mg/SiCp Composite: Influence of Porosity. Materials Science and Engineering: A, 360, 365-371.
http://dx.doi.org/10.1016/S0921-5093(03)00461-1
[25] Danninger, H., Jangg, G., Weiss, B. and Stickler, R. (1993) Microstructure and Mechanical Properties of Sintered Iron. Part I. Basic Considerations and Review of Literature. International Journal of Powder Metallurgy, 25, 111-117.
[26] Bergmark, A., Alzati, L. and Persson, U. (2002) Crack Initiation and Crack Propagation in Copper Powder Mixed PM Steel. Powder Metallurgy Progress, 2, 222-230.
[27] Gerard, D.A. and Koss, D.A. (1990) Low Cycle Fatigue Crack Initiation: Modeling the Effect of Porosity. International Journal of Powder Metallurgy, 26, 337-343.
[28] Sahin. Y. (2003) Preparation and Some Properties of SiC Particle Reinforced Aluminium Alloy Composites. Materials and Design, 24, 671-679. http://dx.doi.org/10.1016/S0261-3069(03)00156-0
[29] Sahin, Y. and Acilar, M. (2003) Production and Properties of SiCp-Reinforced Aluminium Alloy Composites. Composites Part A: Applied Science and Manufacturing, 34, 709-718. http://dx.doi.org/10.1016/S1359-835X(03)00142-8
[30] Yih, P. and Chung, D.D.L. (1997) Titanium Diboride Copper-Matrix Composites. Journal of Materials Science, 32, 1703-1709. http://dx.doi.org/10.1023/A:1018515714687
[31] Ray, S., Fishman, S.G. and Dhingra, A.K. (1988) Porosity in Foundry Composites Prepared by Vortex Method. Proceedings of Cast Reinforced Metal Composites, Chicago, 24-30 September 1988, 77-86.
[32] Mathew, B.A. and Mastromatteo, R. (2002) Metal Injection Moulding for Automotive Applications. Metal Powder Report, 57, 20-23. http://dx.doi.org/10.1016/S0026-0657(02)85078-0
[33] Bocchini, G.F. (1986) Influence of Porosity on the Characteristics of Sintered Materials. International Journal of Powder Metallurgy, 22, 185-188.
[34] Klar, E. and Samal, P.K. (1994) Powder Metallurgy Stainless Steels. In: Eisen, W.B. and German, R.M., Eds., ASM Handbook, Powder Metal Technologies and Applications, Vol. 7, ASM International, Ohio, 474-482.
[35] Hardin, R.A. and Beckermann, C. (2007) Effect of Porosity on the Stiffness of Cast Steel. Metallurgical, and Materials Transactions A, 12, 2992-3006. http://dx.doi.org/10.1007/s11661-007-9390-4
[36] Deshpande, P. and Lin, R. (2006) Wear Resistance of WC Particle Reinforced Copper Matrix Composites and the Effect of Porosity. Materials Science and Engineering A, 418, 137-145. http://dx.doi.org/10.1016/j.msea.2005.11.036
[37] Suh, N.P. (1977) An Overview of the Delamination Theory of Wear. Wear, 44, 1-16.
http://dx.doi.org/10.1016/0043-1648(77)90081-3
[38] Vardavoulias, M., Jouanny-Tresy, C. and Jeandin, M. (1993) Sliding-Wear Behaviour of Ceramic Particle-Reinforced High-Speed Steel Obtained by Powder Metallurgy. Wear, 165, 141-149.
http://dx.doi.org/10.1016/0043-1648(93)90329-K
[39] Gui, M., Kang, S.B. and Lee, J.M. (2000) Influence of Porosity on Dry Sliding Wear Behaviour in Spray Deposited Al-6Cu-Mn/SiCp Composite. Materials Science and Engineering A, 293, 146-156.
http://dx.doi.org/10.1016/S0921-5093(00)01052-2
[40] Bertilsson, I., Karlsson, B. and Wasen, J. (1994) Fatigue Properties of Sintered Steels. International Conference on Powder Metallurgy and Particulate Materials, Vol. 16, Toronto, May 8-11, 1984, 19-32.
[41] Oliver, W.C. and Pharr, G.M. (1992) Improved Technique for Determining Hardness and Elastic Modulus Using Load and Displacement Sensing Indentation Experiments. Journal of Materials Research, 74, 1564-1580.
http://dx.doi.org/10.1557/JMR.1992.1564
[42] Fleck, N.A., Otoyo, H. and Needleman, A. (1992) Indentation on Porous Solids. International Journal of Solids and Structures, 29, 1613-1636. http://dx.doi.org/10.1016/0020-7683(92)90012-I
[43] Jang, B.K. and Matsubara, H. (2005) Influence of Porosity on Hardness and Young’s Modulus of Nanoporous EB- PVD TBCs by Nanoindentation. Materials Letters, 59, 3462-3466. http://dx.doi.org/10.1016/j.matlet.2005.06.014
[44] Chen, X., Xiang, Y. and Vlassak, H.J. (2006) Novel Technique for Measuring the Mechanical Properties of Porous Materials by Nanoindentation. Journal of Materials Research, 21, 715-724. http://dx.doi.org/10.1557/jmr.2006.0088
[45] Ling, Z., Wang, X. and Ma, J. (2008) The Response of Porous Al2O3 Probed to Nanoindentation. Materials Science and Engineering: A, 483-484, 285-288. http://dx.doi.org/10.1016/j.msea.2006.10.195
[46] Dwivedi, D.K. (2010) Adhesive Wear Behaviour of Cast Aluminium-Silicon Alloys: Overview. Materials and Design, 31, 2517-2531. http://dx.doi.org/10.1016/j.matdes.2009.11.038
[47] Elmadagli, M., Perry, T. and Alpas, A.T. (2007) A Parametric Study of the Relationship between Microstructure and Wear Resistance of Al-Si Alloys. Wear, 262, 79-92. http://dx.doi.org/10.1016/j.wear.2006.03.043
[48] Singla, M., Singh, L. and Chawla, V. (2009) Study of Wear Properties of Al-SiC Composites. Journal of Minerals and Materials Characterization and Engineering, 8, 813-819.
[49] Wei, M.X., Chen, K.M., Wang, S.Q. and Cui, X.H. (2011) Analysis for Wear Behaviors of Oxidative Wear. Tribology Letters, 42, 1-7. http://dx.doi.org/10.1007/s11249-010-9741-y
[50] Kumar, S. and Balasubramanian, V. (2010) Effect of Reinforcement Size and Volume Fraction on the Abrasive Wear Behaviour of AA7075 Al/SiCp P/M Composites—A Statistical Analysis. Tribology International, 43, 414-422.
http://Dx.doi.org/10.1016/j.triboint.2009.07.003
[51] Corrochanoa, J., Walker, J.C., Lieblich, M., Ibanez, J. and Rainforth, W.M. (2011) Dry Sliding Wear Behaviour of Powder Metallurgy Al-Mg-Si Alloy-MoSi2 Composites and the Relationship with the Microstructure. Wear, 270, 658- 665. http://dx.doi.org/10.1016/j.wear.2011.01.029
[52] Bermudez, M.D., Martinez-Nicolas, G., Carrion, F.J., Martinez-Mateo, I., Rodriguez, J.A. and Herrera, E.J. (2001) Dry and Lubricated Wear Resistance of Mechanically-Alloyed Aluminium-Base Sintered Composites. Wear, 248, 178-186.
http://dx.doi.org/10.1016/S0043-1648(00)00553-6
[53] Yasmin, T., Khalid, A.A. and Haque, M.M. (2004) Tribological (Wear) Properties of Aluminum-Silicon Eutectic Base Alloy under Dry Sliding Condition. Journal of Materials Processing Technology, 153-154, 833-838.
http://dx.doi.org/10.1016/j.jmatprotec.2004.04.147
[54] Hamn, M., Talib, I.A. and Daud, A.R. (1996) Effect of Element Additions on Wear Property of Eutectic Aluminium-Silicon Alloys. Wear, 194, 54-59. http://dx.doi.org/10.1016/0043-1648(95)06707-8
[55] Casellas, D., Beltran, A., Prado, J.M., Larson, A. and Romero, A. (2004) Microstructural Effects on the Dry Wear Resistance of Powder Metallurgy Al-Si Alloys. Wear, 257, 730-739. http://dx.doi.org/10.1016/j.wear.2004.03.011
[56] Sharifi, E.M. and Karimzadeh, F. (2011) Wear Behavior of Aluminum Matrix Hybrid Nanocomposites Fabricated by Powder Metallurgy. Wear, 271, 1072-1079. http://dx.doi.org/10.1016/j.wear.2011.05.015
[57] Rahimian, M., Parvin, N. and Ehsani, N. (2011) The Effect of Production Parameters on Microstructure and Wear Resistance of Powder Metallurgy Al-Al2O3 Composite. Materials and Design, 32, 1031-1038.
http://dx.doi.org/10.1016/j.matdes.2010.07.016
[58] Ravindran, P., Manisekar, K., Rathika, P. and Narayanasamy, P. (2013) Tribological Properties of Powder Metallurgy Processed Aluminium Self Lubricating Hybrid Composites with SiC Additions. Materials and Design, 45, 561-570.
http://dx.doi.org/10.1016/j.matdes.2012.09.015
[59] Hamid, A A., Ghosh, P.K., Jain, S.C. and Ray, S. (2008) The Influence of Porosity and Particles Content on Dry Sliding Wear of Cast in Situ Al(Ti)-Al2O3(TiO2) Composite. Wear, 265, 14-26.
http://dx.doi.org/10.1016/j.wear.2007.08.018
[60] YIlmaz, O. and Buytoz, S. (2001) Abrasive Wear of Al2O3-Reinforced Aluminium-Based MMCs. Composites Science and Technology, 61, 2381-2392. http://dx.doi.org/10.1016/S0266-3538(01)00131-2?
[61] Bhushan, B. (2002) Introduction to Tribology. John Wiley & Sons, Inc., New York.
[62] AL-Samari, R.A., Haftirman, Ahmad, K.R. and AL-Douri, Y. (2013) The Tribological Behavior of Hypo and Hyper Eutectic Al-Si Alloys under Dry Sliding Condition. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 3, 111-124.
[63] Yalcin, B. (2009) Effect of Porosity on the Mechanical Properties and Wear Performance of 2% Copper Reinforced Sintered Steel Used in Shock Absorber Piston Production. Journal of Materials Science and Technology, 25, 577-582.
[64] Prasada Rao, A.K., Das, K., Murty, B.S. and Chakraborty, M. (2008) Microstructure and the Wear Mechanism of Grain-Refined Aluminium during Dry Sliding against Steel Disc. Wear, 264, 638-647.
http://dx.doi.org/10.1016/j.wear.2007.05.010
[65] Gyimah, G.K., Chen, D. and Huang, P. (2008) Dry Sliding Studies of Porosity on Sintered Cu-Based Brake Materials. Transaction on Control and Mechanical Systems, 2, 219-224.
[66] Alshmri, F., Atkinson, H.V., Hainsworth, S.V., Haidon, C. and Lawes, S.D.A. (2014) Dry Sliding Wear of Aluminium-High Silicon Hypereutectic Alloys. Wear, 313, 106-116. http://dx.doi.org/10.1016/j.wear.2014.02.010
[67] Deya, S.K., Perry, T.A. and Alpas, A.T. (2009) Micromechanisms of Low Load Wear in an Al-18.5% Si Alloy. Wear, 267, 515-524. http://dx.doi.org/10.1016/j.wear.2008.11.011
[68] Islam, M.A. and Farhat, Z.N. (2011) The Influence of Porosity and Hot Isostatic Pressing Treatment on Wear Characteristics of Cast and P/M Aluminium Alloys. Wear, 271, 1594-1601. http://dx.doi.org/10.1016/j.wear.2011.01.037

  
comments powered by Disqus

Copyright © 2019 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.