Finite-Element Analysis of Parts Stress State of Tight Joint Assembled by Press Fitting

Abstract

This paper includes descriptions of the stress distribution regularities in the tight joint parts, regularities of the stress state changes in the contact region along coupling length, stress concentration factors, levels of additional stresses caused by press fitting. Distributions of stress intensity, axial stress, contact pressure, tangent stress in parts and in contact zone along coupling length are considered. Calculation results obtained by three approaches: Lame relationships, FEM without considering assembly method, FEM with considering press fitting process are analyzed and compared. The adequacy of research carried out is confirmed.

Share and Cite:

Vasilya, S. and Anton, S. (2014) Finite-Element Analysis of Parts Stress State of Tight Joint Assembled by Press Fitting. Modern Mechanical Engineering, 4, 198-206. doi: 10.4236/mme.2014.44019.

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1] Ast, M., Rosle, H. and Schenk, R. (1998) Finite Element Analysis of Shrink-Fit Shaft-Hub Connections. Voith Turbo Antriebstechnik GmbH, 1-15.
[2] Abramov, I.V., Abramov, A.I., Sinitsyn, A.N. and Sinitsyna, V.V. (2010) Stress-Strain State of Tight Joints under a Bending Moment. Russian Engineering Research, 8, 759-762.
http://dx.doi.org/10.3103/S1068798X10080022
[3] Abramov, I.V., Abramov, A.I., Sinitsyn, A.N., Sinitsyna, V.V. and Petrov, A.V. (2011) Experimental Plant for Interference Fit Disassembling. 14th International Symposium on Mechatronika, 1-3 June 2011, Trencianske Teplice, 9092.
[4] Abramov, I.V., Abramov, A.I., Sinitsyn, A.N. and Sinitsyna, V.V. (2011) Theoretical Study of New Methods of Assembly and Disassembly of the Tight Joints. Assembly in Mechanical and Instrument Engineering, 3, 11-15.
[5] Abramov, I.V., Abramov, A.I., Sinitsyn, A.N. and Sinitsyna, V.V. (2014) Mechanical Assembly Method Influence on Tight Joint Parts Stress State. Mechanical Engineering Bulletin, 10.
[6] Chenyatskiy, A.V., Sinitsyn, A.N. and Sinitsyna, V.V (2014) Approaches to Stress State Calculation of the Mechanically Assembled Tight Joint Parts. Bulletin of the Izhevsk State Technical University, 3.

Copyright © 2021 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.