Electroforming of a Complex Mould Using an Acid-Mediated Copper Sulphate Bath

R. T. Ojo, C. Edechuku, B. Aremo, M. O. Adeoye, O. S. Teniola

Centre for Energy Research and Development, Obafemi Awolowo University, Ile-Ife, Nigeria.
Department of Materials Science and Engineering, Obafemi Awolowo University, Ile-Ife, Nigeria.

DOI: 10.4236/ojmetal.2014.42002                

Abstract

This work reports a procedure for the fabrication of a complex mould using the technique of electroforming. This was with a view to finding a cheaper and less labour-intensive mould production route practicable locally. A Plaster of Paris electroforming mandrel in the shape of a water bottle was produced and made electrically conducting with a layer of copper conducting paint. Considerations for electroform removal were made by applying a thin, chloroform-dissolvable epoxy layer beneath the conducting copper paint. Uniformity of deposition on the mandrel was accomplished with the construction of a special deposition bath with multiple copper anodes around its perimeter. The electroforming was done in the galvanostatic electro deposition mode for about 240 hrs in a 1 M Cu₂SO₄ bath with the deposition of elemental copper on the mandrel. Incidences of rising bath pH were mediated with concentrated H₂SO₄. A free-standing electroform representing the mould cavity was formed in the deposition. The product so formed was a reproduction of the net-shape of the mandrel exhibiting smooth surface finish. The electroforming was cast with an aluminum backing layer to complete its transformation into a split mould. The finished mould was comparable in appearance to the imported moulds in terms of appearance and reproduction of intricate surface patterns. The simplicity and low cost of this method significantly reduced the requirements for expensive instrumentation and highly skilled labour for mould production.

Keywords

Electroforming, Electroform, Mould, Copper, Electrodeposition

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1]	Peças, P. andHenriques, E. (2003) The Need for Agile Manufacturing Implementation in Mould Making Business. In: Putnik, G.D. and Gunasekaran, A., Eds., Proceedings of the Business Excellence I—Performance Measures, Benchmarking and Best Practices in New Economy, Escola de Engenharia da Universidade do Minho, Braga, 321-326.
[2]	Itoga, S. (1998) The Challenge to Enhancement of the Technological Level of Thailand. APEC Study Centre: Institute for Developing Economies, Tokyo.
[3]	Beira, E. and Menezes, J. (2006) European Tooling and Mould Making Industry: Global Perspective and Italy Role. Working papers “Mercados e Negócios” TSI, Escola Engenharia Universidade do Minho, Braga.
[4]	Choi, B.K., Ko, K. and Kim, B.H. (2005) Development of Intelligent Mould Shop. Computer-Aided Design & Applications, 2, 619-626. http://dx.doi.org/10.1080/16864360.2005.10738326
[5]	Lou, H.H. and Huang, Y. (2006) Electroplating. In: Encyclopedia of Chemical Processing, Taylor and Francis, New York, 1-10.
[6]	American Society for Testing and Materials (2008) ASTM B832-93 Standard Guide for Electroforming with Nickel and Copper. ASTM International, West Conshohocken.
[7]	Shyu, R.F., Yang, H. and Lee, J.H. (2008) Micro-Electroforming Metallic Bipolar Electrodes for Mini-DMFC Stacks. Proceedings DTIP of MEMS and MOEMS, 9-11 April 2008, 192-196.
[8]	Bari, G.A. (2010) Electrodeposition of Nickel. In: Schlesinger, M. and Paunovic, M., Eds., Modern Electroplating, 5th Edition, John Wiley & Sons, New York, 79-111.