[1]
|
E. G. Gillan and R. B. Karner, “Synthesis of Refractory Ceramics via Rapid Metathesis Reactions between Solid- State Precursors,” Chemistry of Materials, Vol. 8, 1996, pp. 333-343. http://dx.doi.org/10.1021/cm950232a
|
[2]
|
J. Kim and H. S. Kwak, “Thermal Shock Resistance and Thermal Expansion Behaviour with Composition and Microstructure of Al2TiO5 Ceramics,” Canadian Metallurgical Quarterly, Vol. 39, No. 4, 2000, pp. 387-396.
http://dx.doi.org/10.1179/000844300794388688
|
[3]
|
E. Kato, K. Daimon and Y. Kobayashi, “Factors Affecting Decomposition Rate of Al2TiO5,” Yogyo-Kyokai-Shi (Journal of the Ceramic Society of Japan), Vol. 86, 1978, pp. 626-631.
|
[4]
|
H. Wohlfromm, J. S. Moya and P. Pena, “Effect of ZrSiO2 and MgO Additions on Reaction Sintering and Properties of Al2TiO5-Based Materials,” Journal of Materials Science, Vol. 25, No. 8, 1990, pp. 3753-3764.
http://dx.doi.org/10.1007/BF00575415
|
[5]
|
V. Buscaglia, P. Nanni, G. Battilana, G. Aliprandi and C. Carry, “Reaction Sintering of Aluminium Titanate: I— Effect of MgO Addition,” Journal of the European Ceramic Society, Vol. 13, No. 5, 1994, pp. 411-417.
http://dx.doi.org/10.1016/0955-2219(94)90018-3
|
[6]
|
P. Pena, H. Wohlfromm, R. Torrecillas and J. S. Moya, “Microstructure and Mechanical Behaviour of Eutectoid Corundum-Rutile Composites,” Ceramics International, Vol. 16, 1990, pp. 375-380.
http://dx.doi.org/10.1016/0272-8842(90)90090-3
|
[7]
|
M. Ishitsuka, T. Sato, T. Endo and M. Shimada, “Synthe- sis and Thermal Stability of Aluminum Titanate Solid Solutions,” Journal of the American Ceramic Society, Vol. 70, No. 2, 1987, pp. 69-71.
http://dx.doi.org/10.1111/j.1151-2916.1987.tb04931.x
|
[8]
|
E. Kato, K. Daimon and J. Takahashi, “Aluminum Titanate Formation by Solid-State Reaction of Fine Al2O3 and TiO2 Powders,” Journal of the American Ceramic Society, Vol. 70, 1980, pp. 33-38.
http://dx.doi.org/10.1111/j.1151-2916.1987.tb04849.x
|
[9]
|
J. J. Cleveland and R. C. Bradt, “Grain Size/Microcracking Relations for Pseudobrookite Oxides,” Journal of the American Ceramic Society, Vol. 61, No. 11-12, 1978, pp. 478-481. http://dx.doi.org/10.1111/j.1151-2916.1978.tb16121.x
|
[10]
|
P. Innocenzi, A. Martucci, L. Armelao, S. Licoccia, M. L. DiVona and E. Traversa, “Sol-Gel Synthesis of β-Al2TiO5 Thin Films at Low Temperature,” Chemistry of Materials, Vol. 12, No. 2, 2000, pp. 517-524.
http://dx.doi.org/10.1021/cm991134i
|
[11]
|
V. Buscaglia, P. Nanni, G. Battilana, G. Aliprandi and C. Carry, “Reaction Sintering of Aluminium Titanate: II— Effect of Different Alumina Powders,” Journal of the European Ceramic Society, Vol. 13, No. 5, 1994, pp. 419-426.
http://dx.doi.org/10.1016/0955-2219(94)90019-1
|
[12]
|
I. J. Kim and L. J. Gauckler, “Excellent Thermal Shock Resistant Materials with Low Thermal Expansion Coefficients,” Journal of Ceramics Processing Research, Vol. 9, 2008, pp. 240-245.
|
[13]
|
A. Tsetsekou, “A Comparison Study of Tialite Ceramics Doped with Various Oxide Materials and Tialite-Mullite Composites: Microstructural, Thermal and Mechanical Properties,” Journal of the European Ceramic Society, Vol. 25, No. 4, 2005, pp. 335-348.
http://dx.doi.org/10.1016/j.jeurceramsoc.2004.03.024
|
[14]
|
M. Takahashi, M. Fukuda, M. Fukuda, H. Fukuda and T. Yoko, “Preparation, Structure, and Properties of Thermally and Mechanically Improved Aluminum Titanate Ceramics Doped with Alkali Feldspar,” Journal of the American Ceramic Society, Vol. 85, No. 12, 2002, pp. 3025-3030.
http://dx.doi.org/10.1111/j.1151-2916.2002.tb00573.x
|
[15]
|
Y. Suzuki and Y. Shinoda, “Magnesium Dititanate (MgTi2O5) with Pseudobrookite Structure: A Review,” Science and Technology of Advanced Materials, Vol. 12, No. 3, 2011, Article ID: 034301.
http://dx.doi.org/10.1088/1468-6996/12/3/034301
|
[16]
|
V. Buscaglia and P. Nanni, “Decomposition of Al2TiO5 and Al2(1-x)MgxTi(1+x)O5 Ceramics,” Journal of the American Ceramic Society, Vol. 81, No. 10, 1998, pp. 2645- 2653.
http://dx.doi.org/10.1111/j.1151-2916.1998.tb02672.x
|
[17]
|
V. Buscaglia and P. Nanni, “Microstructure and Thermal Expansion of Al2TiO5-MgTi2O5 Solid Solutions Obtained by Reaction Sintering,” Journal of the American Ceramic Society, Vol. 22, No. 11, 2002, pp. 1811-1822.
http://dx.doi.org/10.1016/S0955-2219(01)00503-9
|
[18]
|
V. Buscaglia, G. Battilana, M. Leoni and P. Nanni, “Decomposition of Al2TiO5-MgTi2O5 Solid Solutions: A Thermodynamic Approach,” Journal of Materials Science, Vol. 31, No. 19, 1996, pp. 5009-5061.
http://dx.doi.org/10.1007/BF00355899
|
[19]
|
M. L. DiVona, R. Polini, P. Sebastianelli and S. Liccoccia, “A Non-Hydrolytic Sol-Gel Approach for the Preparation of MgxAl2(1-x)Ti(1+x)O5 Powders,” Journal of Sol-Gel Science and Technology, Vol. 31, No. 1-3, 2004, pp. 95-98.
http://dx.doi.org/10.1023/B:JSST.0000047967.82122.6f
|
[20]
|
P. Innocenzi, A. Martucci and L. Armelao, “Low Temperature Synthesis of MgxAl2(1-x)Ti(1+x)O5 Films by Sol-Gel Processing,” Journal of the European Ceramic Society, Vol. 25, No. 16, 2005, pp. 3587-3591.
http://dx.doi.org/10.1016/j.jeurceramsoc.2004.09.020
|