The Improvements of the Backhoe-Loader Arms

DOI: 10.4236/mnsms.2013.34020   PDF   HTML     6,953 Downloads   10,932 Views   Citations

Abstract

In this study, static structural analysis of backhoe-loader arms has been performed with the finite element method (FEM). The aim of this study is to simulate and strengthen the back and front arms of the backhoe-loader concerning with stress under maximum loading condition and different boundary conditions. According to analysis result, back and front arms of the backhoe-loader are strengthened with the use of reinforcements. As a result of the study, strength of the arms has been increased by nearly 20%.

Share and Cite:

A. Erklig and E. Yeter, "The Improvements of the Backhoe-Loader Arms," Modeling and Numerical Simulation of Material Science, Vol. 3 No. 4, 2013, pp. 142-148. doi: 10.4236/mnsms.2013.34020.

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1] E. Yeter, “Improvement of Backhoe-Loader Back and Front Arms,” Ms.c. Thesis, Gaziantep University, Gaziantep, 2009.
[2] S. Ozer, “Kazici-Yükleyicilerde Kazma Mesafesine Bagli Olarak Bom-Stik Grubunun Tasarimi,” Ms.c. Thesis, Mersin University, Mersin, 2007.
[3] B. Cetin, “Design of a Demolition Boom,” Ms.c. Thesis, Middle East Technical University, Ankara, 2007.
[4] T. Smolnicki, D. Derlukiewicz and M. Stancoe, “Evaluation of Load Distribution in the Superstructure Rotation Joint of Single-Bucket Caterpillar Excavators,” Journal of Automation in Construction, Vol. 17, No. 3, 2008, pp. 218- 223. http://dx.doi.org/10.1016/j.autcon.2007.05.003
[5] S. Bosnjak, Z. Petkovic, N. Zrnic, G. Simic and A. Simonovic, “Cracks, Repair and Reconstruction of Bucket Wheel Slewing Excavator Platform,” Engineering Failure Analysis, Vol. 16, No. 5, 2009, pp. 1631-1642. http://dx.doi.org/10.1016/j.engfailanal.2008.11.009
[6] E. Rusinski, J. Czmochowski and P. Moczki, “Numerical and Experimental Analysis of a Mine’s Loader Boom Crack,” Journal of Achievements of Materials and Manufacturing Engineering, Vol. 17, No. 1-2, 2006, pp. 273- 276.
[7] J. Karlinski, E. Rusinski and T. Smolnicki, “Protective Structures for Construction and Mining Machine Operators,” Journal of Automation in Construction, Vol. 17, No. 3, 2008, pp. 232-244. http://dx.doi.org/10.1016/j.autcon.2007.05.008
[8] R. Miralbes and L. Castejon, “Design and Optimization of Crane Jibs for Forklift Trucks,” Proceedings of the World Congress Analysis, London, 2009.
[9] D. Derlukiewicz and G. Przybylek, “Chosen Aspects of FEM Strength Analysis of Telescopic Jib Mounted on Mobile Platform,” Journal of Automation in Construction, Vol. 17, No. 3, 2008, pp. 278-283. http://dx.doi.org/10.1016/j.autcon.2007.05.009
[10] D. Croccolo, M. De Agostinis and N. Vincenzi, “Structural Analysis of an Articulated Urban Bus Chassis via FEM: A Methodology Applied to a Case Study,” Strojniski vestnik—Journal of Mechanical Engineering, vol. 57, No. 11, 2011, pp. 799-809.
[11] ANSYS User’s Manual, “Release 11.0 documentation for ANSYS Workbench,” 2007.

  
comments powered by Disqus

Copyright © 2020 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.