The Adjust Data with the Laboratory PVT Reports that Are Applied in the Oil Wells Designs ()
Abstract
The correlations have been developed with the flash data to predict the multiphase flow and mass transfer in the oil wells designs. Therefore, the laboratory pressure/volume/temperature (PVT) reports require calculation of the flash Oil Formation Volume Factor and the flash Solution Gas/Oil Ratio data starting from Differential Liberation tested data. Once these parameters are known, the oil density and other thermophysical properties can be determined by a complete model for the different states of pressure and temperature in the well during its production life and initial design. The subject of this paper is how to read and make proper use of information contained in the IMP laboratory PVT reports, for the oil wells designs. The discussion is focused on the laboratory report for the well number 407 located in the Maloob field in Mexico.
Share and Cite:
S. Rubén, "The Adjust Data with the Laboratory PVT Reports that Are Applied in the Oil Wells Designs,"
Advances in Chemical Engineering and Science, Vol. 3 No. 4A, 2013, pp. 15-18. doi:
10.4236/aces.2013.34A1003.
Conflicts of Interest
The authors declare no conflicts of interest.
References
|
[1]
|
M. Saucedo-García, et al., “Reporte de Análisis PVT Composicional y Separación en etapas Pozo Zaap-36, Proyecto PEP-IMP F.30670, Análisis de Muestras de Fluidos PVT en Campos del Activo Integral Ku-Maloob-Zaap,” 2006.
|
|
[2]
|
J. P. Brill and H. Mukherjee, “Multiphase Flow in Wells,” Monograph Series, Society of Petroleum Engineers, Richardson, 17, 1999.
|
|
[3]
|
P. L. Moses, “Engineering Applications of Phase Behavior of Crude Oil and Condensate Systems,” Journal of Petroleum Technology, Vol. 38, No. 7, 1986, pp. 715-723.
|
|
[4]
|
T. Kartoatmodjo and Z. Schmidt, “New Correlations for Crude Oil Physical Properties,” Paper SPE 23556, Richardson, 1991.
|
|
[5]
|
C. H. Whitson and M. R. Brulé, “Phase Behavior,” Monograph Series, Society of Petroleum Engineers, Richardson, 20, 2000.
|
|
[6]
|
R. Salazar-Mendoza, E. Poblano-Romero and J. M. Tun-Camal, “Simulación de la Producción de Pozos Productores de Aceite Extra-Pesado: Caso de la Plataforma Ku-M,” Proceedings of Jornadas Técnicas de la AIPM Sección Cd. del Carmen, Ciudad del Carmen 24 Octubre 2008, pp. 52-64.
|