[1]
|
S. H. EL-Sabbagh, “Compatibility Study of Natural Rubber and Ethylene-propylene-diene Rubber Blends,” Journal of Applied Polymer Science, Vol. 90, No. 1, 2003, pp. 1-11.
|
[2]
|
M. Phiriyawirut, “Preparation of Biodiesel Oil Resistance Rubbers from Natural Rubber/Fluoro Elastomer Blends,” Proceeding of the 2nd South East Asian Technical University Consortium (SEATUC) Symposium, Bandung, 2008, pp. 50-55.
|
[3]
|
K. G. Karnika de Silva and M. V. Lewan, “Improving the Morphology and Properties of NR/NBR Blends with NR/ PMMA Graft Copolymers,” In: J. Tinker and K. P. Jones, Eds., Blends of Natural Rubber, A. Chapman & Hall, London, 1998, pp. 68-78.
http://dx.doi.org/10.1007/978-94-011-4922-8_6
|
[4]
|
K. Prakashan, A. K. Gupta and S. N. Maiti, “Effect of Compatibilizer on Micromechanical Deformations and Morphology of Dispersion in PP/PDMS Blend,” Journal of Applied Polymer Science, Vol. 105, No. 5, 2007, pp. 2858-2867. http://dx.doi.org/10.1002/app.26510
|
[5]
|
M. N. Radhakrishnan Nair and M. G. Gopinathan Nair, “Compatibility Studied and Characterisation of a PVC/ NR Blend System Using NR/PU Block Copolymer,” Polymer Bulletin, Vol. 56, No. 6, 2006, pp. 619-631.
http://dx.doi.org/10.1007/s00289-006-0524-4
|
[6]
|
G. Guerrica-Echevarría, J. I. Eguiazábal and J. Nazábal, “Influence of Compatibilization on the Mechanical Behavior of Poly(trimethylene terephthalate)/poly(ethyleneoctene) Blends,” European Polymer Journal, Vol. 43, No. 3, 2007, pp. 1027-1037.
http://dx.doi.org/10.1016/j.eurpolymj.2006.11.036
|
[7]
|
K. A. Moly, S. S. Bhagawan, G. Groeninckx and S. Thomas, “Correlation between the Morphology and Dynamic Mechanical Properties of Ethylene Vinyl Acetate/Linear Low-Density Polyethylene Blends: Effects of the Blend Ratio and Compatibilization,” Journal of Applied Polymer Science, Vol. 100, No. 6, 2006, pp. 4526-4538.
http://dx.doi.org/10.1002/app.22466
|
[8]
|
M. Abdul Kader and A. K. Bhowmick, “New Miscible Elastomer Blends from Acrylate Rubber and Fluorocarbon Rubber,” Rubber Chemistry and Technology, Vol. 73, No. 5, 2000, pp. 889-901.
http://dx.doi.org/10.5254/1.3547627
|
[9]
|
F. W. Barlow, “Rubber Compounding: Principles, Materials, and Techniques,” Marcel Dekker, Inc., New York, 1988.
|
[10]
|
Agency for Toxic Substances and Disease Registry (ATSDR), “Toxicological Profile for Fuel Oils,” U.S. Department of Health and Human Services, Public Health Service, 1995.
|
[11]
|
M. Phiriyawirut and S. Luamlam, “Influence of Poly(vinyl chloride) on Natural Rubber/Chlorosulfonated Polyethylene Blends,” Open Journal of Organic Polymer Materials, Vol. 3, 2013.
|