[1]
|
F. Tarasi, M. Medraj, A. Dolatabadi, J. Oberste-Berghaus and C. Moreau, “Structural Considerations in Plasma Spraying of the Alumina-Zirconia Composite,” Surface and Coatings Technology, Vol. 205, No. 23-24, 2011, pp. 5437-5443.
|
[2]
|
J. R. Davis, “Handbook of Thermal Spray Technology,” ASM International, 2004.
|
[3]
|
A. Ibrahim, H. Salem and S. Sedky, “Excimer Laser Surface Treatment of Plasma Sprayed Alumina—13% Titania Coatings,” Surface and Coatings Technology, Vol. 203, No. 23, 2009, pp. 3579-3589.
doi:10.1016/j.surfcoat.2009.05.034
|
[4]
|
R. McPherson, “A Review of Microstructure and Properties of PS Ceramic Coatings,” Surface and Coatings Technology, Vol. 39-40, Pt. 1, 1989, pp. 173-180.
doi:10.1016/0257-8972(89)90052-2
|
[5]
|
H. Li, S. Costil, V. Barnier and C. Coddet, “Surface Modifications Induced by Nanosecond Pulsed Laser Irradiation of Metallic Substrates,” Surface & Coatings Technology, Vol. 201, No. 3-4, 2006, pp. 1383-1392.
doi:10.1016/j.surfcoat.2006.02.012
|
[6]
|
R. S. Lima and B. R. Marple, “Toward Highly Sintering-Resistant Nanostructured ZrO2-7 wt. %Y2O3 Coatings for TBC Applications by Employing Differential Sintering,” Journal of Thermal Spray Technology, Vol. 17, No. 5-6, 2008, pp. 846-852.
|
[7]
|
P. Fauchais, M. Vardelle, A. Vardelle, L. Bianchi and A. C. Leger, “Parameters Controlling the Generation and Properties of Plasma Spray Zirconia Coatings,” Plasma Chemistry and Plasma Processing, Vol. 16, No. 1, 1996, pp. 99-125.
|
[8]
|
A. Ibrahim, Z. Abdel Hamid and A. Abdel Aal, “Mechanical Properties and Microstructure of Nanostructured and Conventional Alumina-Titania Plasma Spray Coatings,” Journal of Material Science Engineering A, Vol. 527, No. 3, 2010, pp. 663-668.
doi:10.1016/j.msea.2009.08.054
|
[9]
|
D. Basting, “Excimer Laser Technology: Laser Sources, Optics, Systems and Applications,” Lambda Physik, Bristol, 2001.
|
[10]
|
D. W. Thomas, C. Foulkes-Williams, P. T. Rumsby and M. C. Gower, “Surface Modification of Polymers and Ceramics Induced by Excimer Laser Radiation,” In: E. Fogarassy and S. Lazare, Eds., Laser Ablation of Electronic Materials, Elsevier Science Publications, Berlin, 1992, pp. 221-228.
|
[11]
|
S. P Harimkar and N. B. Dahotre, “Crystallographic and Morphological Textures in Laser Surface Modified Alumina Ceramic,” Journal of Applied Physics, Vol. 100, No. 2, 2006, pp. 24901-24907.
doi:10.1063/1.2214365
|
[12]
|
J. Brannon, “Excimer Laser Ablation and Etching,” American Vacuum Society, New York, 1993.
|
[13]
|
E. Lee, Y. Sohn, S. Jha, J. Holmes and R. Sisson, “Phase Transformations of Plasma-Sprayed Zirconia-Ceria Thermal Barrier Coatings,” Journal of the American Ceramic Society, Vol. 85, No. 8, 2002, pp. 2065-2071.
doi:10.1111/j.1151-2916.2002.tb00405.x
|
[14]
|
V. Jayaram, C. G. Levie, T. Whitney and R. Mehrabian, “Characterization of Al2O3-ZrO2 Powders Produced by Electrohydrodynamic Atomization,” Materials Science and Engineering A, Vol. 124, No. 1, 1990, pp. 65-81.
doi:10.1016/0921-5093(90)90336-2
|
[15]
|
H.-J. Kim and Y. J. Kim, “Amorphous Phase Formation of the Pseudo-Binary Al2O3-ZrO2 Alloy during Plasma Spray Processing,” Journal of Materials Science, Vol. 34, No. 1, 1999, pp. 29-33. doi:10.1023/A:1004492919174
|
[16]
|
A. L. Vasiliev, N. P. Padture and X. Ma, “Coatings of Metastable Ceramics Deposited by Solution-Precursor Plasma Spray: I. Binary ZrO2-Al2O3 System, “Acta Materialia, Vol. 54, No. 18, 2006, pp. 4913-4920.
doi:10.1016/j.actamat.2006.06.025
|
[17]
|
T. Chraska, K. Neufussa, J. Dubskya, P. Ctibora and P. Rohan, “Fabrication of Bulk Nanocrystalline Alumina-Zirconia Materials,” Ceramics International, Vol. 34, No. 5, 2008, pp1229-1236.
doi:10.1016/j.ceramint.2007.04.001
|
[18]
|
Z. Zhou, H. Shirasawa, N. Eguchi and A. Omori, “Microstructures and Characterization of Zirconia-Yttria Coatings Formed In Laser and Hybrid Spray Process,” Journal of Thermal Spray Technology, Vol. 8, No. 3, pp. 405-413.
doi:10.1361/105996399770350359
|
[19]
|
G. Antou, G. Coddet and F. Machi, “Modification of Ceramic Thermal Spray Deposit Microstructures Implementing in Situ Laser Remelting,” Surface and Coatings Technology, Vol. 172, No. 2-3, 2003, pp. 279-290.
doi:10.1016/S0257-8972(03)00431-6
|
[20]
|
J. Iwaszko, “Surface Remelting Treatment of Plasma-Sprayed Al2O3 + 13 wt% TiO2 Coatings,” Surface & Coatings Technology, Vol. 201, No. 6, 2006, pp. 3443-3451. doi:10.1016/j.surfcoat.2006.07.234
|
[21]
|
F. Tarasi, M. Medraj, A. Dolatabadi, J. Oberste-Berghaus and C. Moreau, “Amorphous and Crystalline Phase Formation during Spraying of the Alumina-Zirconia Composite,” Journal of the European Ceramic Society, Vol. 31, No. 15, 2011, pp. Pages 2903-2913.
|