Share This Article:

Parameter Estimation of Single Phase Core Type Transformer Using Bacterial Foraging Algorithm

Abstract Full-Text HTML Download Download as PDF (Size:265KB) PP. 917-925
DOI: 10.4236/eng.2010.211115    6,996 Downloads   13,857 Views   Citations

ABSTRACT

The electrical circuit equivalents of magnetic device structures such as transformer require an exact knowledge of its parameters. Efficient parameter estimation technique is essential to obtain the equivalent circuit parameters of transformer because the parameters are used to manipulate parasitic elements and to obtain the enhanced circuit performance. In this paper, Bacterial Foraging Algorithm (BFA) has been applied to estimate the equivalent circuit parameters of single phase core type transformer. The information of open Circuit (OC) and Short Circuit (SC) tests has been utilized in BFA algorithm. The effectiveness of the proposed approach has been tested with a sample transformer and the simulation results are compared against the conventional method. The numerical results show that the proposed approach outperforms the conventional method in the aspects of solution quality.

Conflicts of Interest

The authors declare no conflicts of interest.

Cite this paper

S. Padma and S. Subramanian, "Parameter Estimation of Single Phase Core Type Transformer Using Bacterial Foraging Algorithm," Engineering, Vol. 2 No. 11, 2010, pp. 917-925. doi: 10.4236/eng.2010.211115.

References

[1] [1] B. A. Mork, “Five-Legged Wound-Core Transformer Model: Derivation, Parameters, Implementation, and Evaluation,” IEEE Transactions on Power Delivery, Vol. 14, No. 4, October 1999, pp. 1519-1525.
[2] X. S. Chen and S. S. Venkata, “A Three-Phase Three- Winding Core-Type Transformer Model for Low-Frequency Transient Studies,” IEEE Transactions on Power Delivery, Vol. 12, No. 2, April 1997, pp. 775-781.
[3] H. K. M. Youssef and K. M. Naggar, “Genetic-Based Algorithm for Identification Synchronous Machine Parameter Using Short Circuit Tests,” International Journal of Energy Research, Vol. 24, No. 10, 2000, pp. 877-885.
[4] P. Pillay, V. Levin, P. Otaduy and J. Kueck, “In-Situ Induction Motor Efficiency Determination Using the Genetic Algorithm,” IEEE Transactions on Energy Conversion, Vol. 13, No. 4, December 1998, pp. 326-333.
[5] S. H. Thilagar and G. S. Rao, “In-Situ Determination of Transformer Winding Temperature Rise Using Genetic Algorithm Based Parameter Estimation,” Proceedings of 2nd International Conference on Electrical and Computer Engineering, Dhaka, 26-28 December 2002.
[6] B. Abdelhadi, A. Benoudijit and N. Nait-Said, “Application of Genetic Algorithm with a Novel Adaptive Scheme for the Identification of Induction Machine Parameters,” IEEE Transactions on Energy conversion, Vol. 20, No. 2, June 2005, pp. 284-291.
[7] B. L. Peacock, M. Steurer, J. Langston, T. Baldwin and S. Henry, “Estimation of Parameters for Digital Modeling of Saturation Effects for a Transformer Model for a Real- Time Simulator,” 41st Southeastern Symposium on System Theory, Tullahoma, 15-17 March 2009, pp. 306-310.
[8] S. A. Soliman, R. A. Alammari and M. A. Mostafa, “On- Line Estimation of Transformer Model Parameters,” Proceedings of Large Engineering System Conference on Power Engineering, Halifax, 28-30 July 2004, pp. 170- 178.
[9] F. Alonge, F. D’lppolito, G. Ferrante and F. M. Raimondi, “Parameter Identification of Induction Motor Model Using Genetic Algorithms,” IEE Proceedings of Control Theory Applications, Vol. 145, No. 6, November 1998, pp. 587-597.
[10] J. Wang, A. F. Witulski, J. L. Vollin, T. K. Phelps and G. I. Cardwell, “Derivation, Calculation and Measurement of Parameters for a Multi-Winding Transformer Electrical Model,” Proceedings of IEEE Applied Power Electronics Conference, Dallas, Vol. 1, 14-18 March 1999, pp. 220-226.
[11] R. K. Ursem and P. Vadstrup, “Parameter Identification of Induction Motors Using Differential Evolution,” Proceedings of the Congress on Evolutionary Computation, Canberra, Vol. 2, 8-12 December 2003, pp. 790-796.
[12] K. S. Huang, W. Kent, Q. H. Wu and D. R. Turner, “Parameter Identification of an Induction Machine Using Genetic Algorithms,” International Symposium on Computer Aided Control System Design, Hawaii, 22-27 August 1999, pp. 510-515.
[13] A. Keyhani, A. Tsai and S. Sebo, “Modeling and Parameter Estimation of Power Transformers for the Study of High Frequency System Transients,” Proceedings of the 32nd Midwest Symposium on Circuits and Systems, Urbana, Vol. 1, 14-16 August 1989, pp. 258-264.
[14] P. Y. Chung, M. D?len and R. D. Lorenz, “Parameter Identification for Induction Machines by Continuous Ge-netic Algorithms,” Proceedings of Annual Neural Network in Engineering Conference, St. Louis, 5-8 November 2000, pp. 1-13.
[15] W. J Tang, Q. H. Wu and J. R. Saunders, “Bacterial Foraging Algorithm for Dynamic Environments,” Proceedings of IEEE Congress on Evolutionary Computation, Vancouver, 16-21 July 2006, pp. 1324-1330.
[16] D. P. Acharya, G. Panda, S. Mishra and Y. V. S. Lakshmi, “Bacteria Foraging Based Independent Component Ana- lysis,” Proceedings of In-ternational Conference on Com- putational Intelligence and Multimedia Applications, Si- vakasi, 13-15 December 2007, pp. 527-531.
[17] B. K. Panigrahi and V. R. Pandi, “Bacterial Foraging Optimisation: Nelder-Mead Hybrid Algorithm for Economic Load Dispatch,” IET Generation, Transmission and Distribution, Vol. 2, No. 4, 2008, pp. 556-565.
[18] M. Tripathy and S. Mishra, “Bacteria Foraging Based Solution to Optimize Both Real Power Loss and Voltage Stability Limit,” IEEE Transactions on Power Systems, Vol. 22, No. 1, February 2007, pp. 240-248.
[19] G. Noriega, J. Restrepo, V. Guzmán, M. Giménez and J. Aller, “On Line Parameter Estimation of Electric Systems Using the Bacterial Foraging Algorithm,” Proceedings of 13th European Conference on Power Electronics and Applications, Barcelona, 8-10 September 2009, pp. 1-7.

  
comments powered by Disqus

Copyright © 2019 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.