An Experimental Investigation on the Quasi-Static Flotation Transport of a Glass Substrate Using Vortex Bearing Elements

Xin Li, Yoshihiro Nakamura, Mikio Horie, Toshiharu Kagawa

Department of Mechano-Micro Engineering, Tokyo Institute of Technology, Yokohama, Japan.
Precision and Intelligence Laboratory, Tokyo Institute of Technology, Yokohama, Japan.

DOI: 10.4236/jfcmv.2013.11002                

Abstract

In this paper, we build an air conveyor with newly developed vortex bearing elements, and study the flotation precision of the front-end of the substrate in quasi-static flotation transport. We experimentally discuss the three influential factors: air supply pressure, thickness of the substrates and installing direction of the vortex bearing element. We find that during the process of transport the movement of the substrate leads to the variation of flotation height. The amplitude of variation (e.g. flotation precision) is dependent upon the bearing stiffness and the suction force of the vortex bearing elements. Increasing air supply pressure properly can improve the flotation precision, but an excess pressure can cause over-suction due to high negative pressure and result in a poor flotation precision. We also know that the flotation precision of thin and light substrates are easily affected by the suction force of vortex flow because they float with a high flotation height and are more susceptible to deformation. Finally, we investigate four installing directions of the vortex bearing element. Different installing direction can lead to different variation of flotation height.

Keywords

Flotation Transport; Air Conveyor; Vortex Bearing Element; Vortex Flow; Suction Force

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1]	D. Devitt, “The Physics of Glass Flotation,” Semiconductor International Japan, Vol. 5, 2009, pp. 20-25.
[2]	J. A. Paivanas and J. K. Hassan, “Air Film System for Handling Semiconductor Wafer,” IBM Journal of Research Development, Vol. 23, No. 4, 1979, pp. 361-375. doi:10.1147/rd.234.0361
[3]	Y. L. Srinivas, K. N. Seetharamu and M. A. Parameswaran, “Investigation of Air Film Conveyor Pressurized through Multiple Holes,” Finite Elements in Analysis and Design, Vol. 6, No. 3, 1990, pp. 235-243. doi:10.1016/0168-874X(90)90029-E
[4]	H. G. Lee and D. G. Lee, “Design of a Large LCD Panel Handling Air Conveyor with Minimum Air Consumption,” Mechanism and Machine Theory, Vol. 41, No. 7, 2006, pp. 790-806. doi:10.1016/j.mechmachtheory.2005.10.009
[5]	K. Amano, S. Yoshimoto and M. Miyatake, “Basic Investigation of Noncontact Transportation System for Large TFT-LCD Glass Sheet Used in CCD Inspection Section,” Precision Engineering, Vol. 35, No. 1, 2011, pp. 58-64. doi:10.1016/j.precisioneng.2010.08.010
[6]	CoreFlow. http://www.coreflow.com/
[7]	New Way Air Bearings. http://www.newwayairbearings. com/
[8]	Daiichi Institution Industry. http://www.daiichi-shisetsu. co.jp
[9]	Oiles Corporation. http://www.oiles.co.jp/
[10]	B. C. Majumdar, “Externally Pressurized Gas Bearings: A Review,” Wear, Vol. 62, No. 2, 1980, pp. 299-314. doi:10.1016/0043-1648(80)90175-1
[11]	W. A. Gross, “Gas Bearings: A Survey,” Wear, Vol. 6, No. 6, 1963, pp. 423-443. doi:10.1016/0043-1648(63)90279-5
[12]	H. Ozawa, K. Kakuda and T. Yasuda, “Noncontact Air Conveyor,” Japan Patent No. P2010-92724, 2010. (in Japanese)
[13]	X. Li, M. Horie and T. Kagawa, “Study on the Basic Characteristics of a Vortex Bearing Element,” International Journal of Advanced Manufacturing Technology, Vol. 64, No. 1-4, 2013, pp. 1-12. doi:10.1007/s00170-012-4372-0
[14]	X. Li, K. Kawashima and T. Kagawa, “Analysis on Vor- tex Levitation,” Experimental Thermal and Fluid Science, Vol. 32, No. 8, 2008, pp. 1448-1454. doi:10.1016/j.expthermflusci.2008.03.010
[15]	I. Kim, X. Li, C. Youn, K. Kawashima and T. Kagawa, “Research on a Non-Contact Handling System Using Swirling Flow (3rd Report: Effect of Positional Relationship between a Vortex Cup and a Transporting Object),” Japan Fluid Power System Society, Vol. 42, No. 4, 2011, pp. 67-73.