Particles Removal from a Moving Tube by Blowing Systems: A CFD Analysis

Abstract Full-Text HTML Download Download as PDF (Size:2568KB) PP. 268-276
DOI: 10.4236/eng.2013.53037    4,028 Downloads   5,712 Views  

ABSTRACT

The use of an air jet to clean the products during the manufacturing is usual in an industrial environment. In this paper the problem of the removal, from the inner of the tube, of the waste arising from the cutting operation by means of an air blowing system is analysed. In order to obtain indications about the real importance of the involved parameters and their effects, a numerical procedure, based on CFD analysis trough the code STAR CCM+, has been settled. The effects of the different parameters were highlighted. The results are congruent with the experience, indicating that the adopted solution is not suitable for the small tubes. Therefore, a different blowing solution is investigated, with the object to improve the cleaning capabilities of the system. The results for the new blowing solution provide a significant improvement of the capability to remove the waste arising from the cutting operation can be expected.

Cite this paper

G. Lombardi and R. Curatola, "Particles Removal from a Moving Tube by Blowing Systems: A CFD Analysis," Engineering, Vol. 5 No. 3, 2013, pp. 268-276. doi: 10.4236/eng.2013.53037.

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1] A. Guha, R. M. Barron and R. Balachandar, “An Experimental and Numerical Study of Water Jet Cleaning Process,” Journal of Materials Processing Technology, Vol. 211, No. 4, 2011, pp. 610-618.
[2] M. M. Pror, “Automated Moving Mesh Techniques and Re-Meshing Strategies in CFD Applications Using Morphing and Rigid Motions,” CRS4 Technical Report, 2012.

  
comments powered by Disqus

Copyright © 2020 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.